Setting Up Unison File Synchronization Between Two Servers On Debian Squeeze

Want to support HowtoForge? Become a subscriber!
 
Submitted by falko (Contact Author) (Forums) on Sun, 2011-08-07 18:36. :: Debian | High-Availability | Storage

Setting Up Unison File Synchronization Between Two Servers On Debian Squeeze

Version 1.0
Author: Falko Timme <ft [at] falkotimme [dot] com>
Follow me on Twitter
Last edited 07/26/2011

This tutorial shows how to set up file synchronization between two Debian Squeeze servers with Unison. Unison is a file-synchronization tool similar to rsync, but the big difference is that it tracks/synchronizes changes in both directions, i.e., files changed on server1 will be replicated to server2 and vice versa.

I do not issue any guarantee that this will work for you!

 

1 Preliminary Note

In this tutorial I use the following two Debian Squeeze servers:

  • server1.example.com with the IP address 192.168.0.100
  • server2.example.com with the IP address 192.168.0.101

I want to synchronize the directory /var/www between the two servers. I will run Unison as the root user in this tutorial so that Unison has sufficient permissions to synchronize user and group permissions.

 

2 Installing Unison

server1/server2:

Unison has to be installed on server1 and server2; since we connect from server1 to server2 using SSH, we also need the SSH packages. This can be achieved as follows:

apt-get install unison openssh-server ssh

 

3 Creating A Private/Public Key Pair On server1

server1:

Now we create a private/public key pair on server1.example.com:

ssh-keygen -t dsa

root@server1:~# ssh-keygen -t dsa
Generating public/private dsa key pair.
Enter file in which to save the key (/root/.ssh/id_dsa):
 <-- ENTER
Created directory '/root/.ssh'.
Enter passphrase (empty for no passphrase):
 <-- ENTER
Enter same passphrase again: <-- ENTER
Your identification has been saved in /root/.ssh/id_dsa.
Your public key has been saved in /root/.ssh/id_dsa.pub.
The key fingerprint is:
1b:95:bc:4a:f4:9f:d8:ea:24:31:0f:c9:72:d5:a7:80 root@server1.example.com
The key's randomart image is:
+--[ DSA 1024]----+
|                 |
|         o o     |
|        E * . .  |
|       o = o o   |
|      . S o .    |
|       + O + .   |
|        + + +    |
|         o .     |
|         .o      |
+-----------------+
root@server1:~#

It is important that you do not enter a passphrase otherwise the mirroring will not work without human interaction so simply hit ENTER!

Next, we copy our public key to server2.example.com:

ssh-copy-id -i $HOME/.ssh/id_dsa.pub root@192.168.0.101

root@server1:~# ssh-copy-id -i $HOME/.ssh/id_dsa.pub root@192.168.0.101
The authenticity of host '192.168.0.101 (192.168.0.101)' can't be established.
RSA key fingerprint is 25:d8:7a:ee:c2:4b:1d:92:a7:3d:16:26:95:56:62:4e.
Are you sure you want to continue connecting (yes/no)?
 <-- yes (you will see this only if this is the first time you connect to server2)
Warning: Permanently added '192.168.0.101' (RSA) to the list of known hosts.
root@192.168.0.101's password:
 <-- server2 root password
Now try logging into the machine, with "ssh 'root@192.168.0.101'", and check in:

  .ssh/authorized_keys

to make sure we haven't added extra keys that you weren't expecting.

root@server1:~#

Now check on server2 if server1's public key has correctly been transferred:

server2:

cat $HOME/.ssh/authorized_keys

ssh-dss AAAAB3NzaC1kc3MAAACBAPhiAexgEBexnw0rFG8lXwAuIsca/V+lhmv5lhF3BqUfAbL7e2sWlQlGhxZ8I2UnzZK8Ypffq6Ks+lp46yOs7MMXLqb7JBP9gkgqxyEWqOoUSt5hTE9ghupcCvE7rRMhefY5shLUnRkVH6hnCWe6yXSnH+Z8lHbcfp864GHkLDK1AAAAFQDddQckbfRG4C6LOQXTzRBpIiXzoQAAAIEAleevPHwi+a3fTDM2+Vm6EVqR5DkSLwDM7KVVNtFSkAY4GVCfhLFREsfuMkcBD9Bv2DrKF2Ay3OOh39269Z1rgYVk+/MFC6sYgB6apirMlHj3l4RR1g09LaM1OpRz7pc/GqIGsDt74D1ES2j0zrq5kslnX8wEWSHapPR0tziin6UAAACBAJHxgr+GKxAdWpxV5MkF+FTaKcxA2tWHJegjGFrYGU8BpzZ4VDFMiObuzBjZ+LrUs57BiwTGB/MQl9FKQEyEV4J+AgZCBxvg6n57YlVn6OEA0ukeJa29aFOcc0inEFfNhw2jAXt5LRyvuHD/C2gG78lwb6CxV02Z3sbTBdc43J6y root@server1.example.com

 

4 Running Unison

server1:

We can now run Unison for the first time to synchronize the /var/www directory on both servers. On server1 run:

unison /var/www ssh://192.168.0.101//var/www

Output will be similar to this one - you might have to answer a few questions as this is the first time Unison is being run:

root@server1:~# unison /var/www ssh://192.168.0.101//var/www
Contacting server...
Connected [//server1.example.com//var/www -> //server2.example.com//var/www]
Looking for changes
Warning: No archive files were found for these roots, whose canonical names are:
        /var/www
        //server2.example.com//var/www
This can happen either
because this is the first time you have synchronized these roots,
or because you have upgraded Unison to a new version with a different
archive format.

Update detection may take a while on this run if the replicas are
large.

Unison will assume that the 'last synchronized state' of both replicas
was completely empty.  This means that any files that are different
will be reported as conflicts, and any files that exist only on one
replica will be judged as new and propagated to the other replica.
If the two replicas are identical, then no changes will be reported.

If you see this message repeatedly, it may be because one of your machines
is getting its address from DHCP, which is causing its host name to change
between synchronizations.  See the documentation for the UNISONLOCALHOSTNAME
environment variable for advice on how to correct this.

Donations to the Unison project are gratefully accepted:
http://www.cis.upenn.edu/~bcpierce/unison

  Waiting for changes from server| webalizer
Reconciling changes

local          server2.e...
dir      ---->            apps  [f]
file     ---->            index.html  [f]
link     ---->            ispconfig  [f]
dir      ---->            php-fcgi-scripts/apps  [f]
dir      ---->            webalizer  [f]
link     ---->            webmail  [f]

Proceed with propagating updates? []
 <-- y
Propagating updates


UNISON 2.32.52 started propagating changes at 14:25:02 on 26 Jul 2011
[BGN] Copying apps from /var/www to //server2.example.com//var/www
[BGN] Copying index.html from /var/www to //server2.example.com//var/www
[BGN] Copying ispconfig from /var/www to //server2.example.com//var/www
[BGN] Copying php-fcgi-scripts/apps from /var/www to //server2.example.com//var/www
[BGN] Copying webalizer from /var/www to //server2.example.com//var/www
[BGN] Copying webmail from /var/www to //server2.example.com//var/www
[END] Copying ispconfig
[END] Copying webmail
[END] Copying apps
[END] Copying webalizer
[END] Copying index.html
[END] Copying php-fcgi-scripts/apps
UNISON 2.32.52 finished propagating changes at 14:25:03 on 26 Jul 2011


Saving synchronizer state
Synchronization complete at 14:25:03  (6 items transferred, 0 skipped, 0 failed)
root@server1:~#

Check the /var/www directory on server1 and server2 now, and you should find that they are in sync now.

Of course, we don't want to run Unison interactively, therefore we can create a preferences file (/root/.unison/default.prf) that contains all settings that we otherwise would have to specify on the command line:

vi /root/.unison/default.prf

# Roots of the synchronization
root = /var/www
root = ssh://192.168.0.101//var/www

# Paths to synchronize
#path = current
#path = common
#path = .netscape/bookmarks.html

# Some regexps specifying names and paths to ignore
#ignore = Path stats    ## ignores /var/www/stats
#ignore = Path stats/*  ## ignores /var/www/stats/*
#ignore = Path */stats  ## ignores /var/www/somedir/stats, but not /var/www/a/b/c/stats
#ignore = Name *stats   ## ignores all files/directories that end with "stats"
#ignore = Name stats*   ## ignores all files/directories that begin with "stats"
#ignore = Name *.tmp    ## ignores all files with the extension .tmp

#          When set to true, this flag causes the user interface to skip
#          asking for confirmations on non-conflicting changes. (More
#          precisely, when the user interface is done setting the
#          propagation direction for one entry and is about to move to the
#          next, it will skip over all non-conflicting entries and go
#          directly to the next conflict.)
auto=true

#          When this is set to true, the user interface will ask no
#          questions at all. Non-conflicting changes will be propagated;
#          conflicts will be skipped.
batch=true

#          !When this is set to true, Unison will request an extra
#          confirmation if it appears that the entire replica has been
#          deleted, before propagating the change. If the batch flag is
#          also set, synchronization will be aborted. When the path
#          preference is used, the same confirmation will be requested for
#          top-level paths. (At the moment, this flag only affects the
#          text user interface.) See also the mountpoint preference.
confirmbigdel=true

#          When this preference is set to true, Unison will use the
#          modification time and length of a file as a `pseudo inode
#          number' when scanning replicas for updates, instead of reading
#          the full contents of every file. Under Windows, this may cause
#          Unison to miss propagating an update if the modification time
#          and length of the file are both unchanged by the update.
#          However, Unison will never overwrite such an update with a
#          change from the other replica, since it always does a safe
#          check for updates just before propagating a change. Thus, it is
#          reasonable to use this switch under Windows most of the time
#          and occasionally run Unison once with fastcheck set to false,
#          if you are worried that Unison may have overlooked an update.
#          The default value of the preference is auto, which causes
#          Unison to use fast checking on Unix replicas (where it is safe)
#          and slow checking on Windows replicas. For backward
#          compatibility, yes, no, and default can be used in place of
#          true, false, and auto. See the section "Fast Checking" for more
#          information.
fastcheck=true

#          When this flag is set to true, the group attributes of the
#          files are synchronized. Whether the group names or the group
#          identifiers are synchronizeddepends on the preference numerids.
group=true

#          When this flag is set to true, the owner attributes of the
#          files are synchronized. Whether the owner names or the owner
#          identifiers are synchronizeddepends on the preference
#          extttnumerids.
owner=true

#          Including the preference -prefer root causes Unison always to
#          resolve conflicts in favor of root, rather than asking for
#          guidance from the user. (The syntax of root is the same as for
#          the root preference, plus the special values newer and older.)
#          This preference is overridden by the preferpartial preference.
#          This preference should be used only if you are sure you know
#          what you are doing!
prefer=newer

#          When this preference is set to true, the textual user interface
#          will print nothing at all, except in the case of errors.
#          Setting silent to true automatically sets the batch preference
#          to true.
silent=true

#          When this flag is set to true, file modification times (but not
#          directory modtimes) are propagated.
times=true

The comments should make the file self-explaining, except for the path directives. If you specify no path directives, then the directories in the root directives will be synchronized. If you specify path directives, then the paths are relative to the root path (e.g. root = /var/www and path = current translates to /var/www/current), and only these subdirectories will be synchronized, not the whole directory specified in the root directive.

You can find out more about the available options by taking a look at Unison's man page:

man unison

Now that we have put all settings in a preferences file (especially the root (and optionally the path) directives), we can run Unison without any arguments:

unison

 

5 Creating A Cron Job

server1:

We want to automate synchronization, that is why we create a cron job for it on server1.example.com:

crontab -e

*/5 * * * * /usr/bin/unison &> /dev/null

This would run Unison every 5 minutes; adjust it to your needs (see

man 5 crontab

). I use the full path to unison here (/usr/bin/unison) just to go sure that cron knows where to find unison. Your unison location might differ. Run

which unison

to find out where yours is.

 

6 Links


Please do not use the comment function to ask for help! If you need help, please use our forum.
Comments will be published after administrator approval.
Submitted by Anonymous (not registered) on Fri, 2014-02-07 15:40.
Wonderful article. Solved my problem precisely. Ideal for a first time user.
Submitted by Anonymous (not registered) on Mon, 2011-08-08 20:00.
this would be cool, but curious if this would work in the ispconfig3 multi server environment.
Submitted by Kalin Mandaliev (not registered) on Sun, 2011-08-07 20:34.
I will try it.