How To Use Multiple PHP Versions (PHP-FPM & FastCGI) With ISPConfig 3 (CentOS 6.3) - Page 3

4 Building PHP 5.4.12 (PHP-FPM)

Download and extract PHP 5.4.12:

mkdir /opt/php-5.4.12
mkdir /usr/local/src/php5-build
cd /usr/local/src/php5-build
wget http://de.php.net/get/php-5.4.12.tar.bz2/from/this/mirror -O php-5.4.12.tar.bz2
tar jxf php-5.4.12.tar.bz2

cd php-5.4.12/

Install the prerequisites for building PHP5:

yum groupinstall 'Development Tools'
yum install libxml2-devel libXpm-devel gmp-devel libicu-devel t1lib-devel aspell-devel openssl-devel bzip2-devel libcurl-devel libjpeg-devel libvpx-devel libpng-devel freetype-devel readline-devel libtidy-devel libxslt-devel libmcrypt-devel pcre-devel curl-devel mysql-devel ncurses-devel gettext-devel net-snmp-devel libevent-devel libtool-ltdl-devel libc-client-devel postgresql-devel

Configure and build PHP 5.4.12 as follows (you can adjust the ./configure command to your needs, take a look at

./configure --help

to see all available options; if you use a different ./configure command, it is possible that additional libraries are required, or the build process will fail):

./configure \
--prefix=/opt/php-5.4.12 \
--with-pdo-pgsql \
--with-zlib-dir \
--with-freetype-dir \
--enable-mbstring \
--with-libxml-dir=/usr \
--enable-soap \
--enable-calendar \
--with-curl \
--with-mcrypt \
--with-zlib \
--with-gd \
--with-pgsql \
--disable-rpath \
--enable-inline-optimization \
--with-bz2 \
--with-zlib \
--enable-sockets \
--enable-sysvsem \
--enable-sysvshm \
--enable-pcntl \
--enable-mbregex \
--with-mhash \
--enable-zip \
--with-pcre-regex \
--with-mysql \
--with-pdo-mysql \
--with-mysqli \
--with-jpeg-dir=/usr \
--with-png-dir=/usr \
--enable-gd-native-ttf \
--with-openssl \
--with-fpm-user=nginx \
--with-fpm-group=nginx \
--with-libdir=lib64 \
--enable-ftp \
--with-imap \
--with-imap-ssl \
--with-kerberos \
--with-gettext \
--enable-fpm

The last switch (--enable-fpm) makes sure this PHP version will work with PHP-FPM. If you want to use this PHP-FPM version with Apache, please use --with-fpm-user=apache and --with-fpm-group=apache; if you want to use this PHP-FPM version with nginx, please use --with-fpm-user=nginx and --with-fpm-group=nginx.

make
make install

Copy php.ini and php-fpm.conf to the correct locations:

cp /usr/local/src/php5-build/php-5.4.12/php.ini-production /opt/php-5.4.12/lib/php.ini
cp /opt/php-5.4.12/etc/php-fpm.conf.default /opt/php-5.4.12/etc/php-fpm.conf

Open /opt/php-5.4.12/etc/php-fpm.conf and adjust the following settings - in the listen line you must use an unused port (e.g. 8998; port 9000 might be in use by the default CentOS PHP-FPM already), and you must add the line include=/opt/php-5.4.12/etc/pool.d/*.conf at the end. If you want to use this PHP-FPM version with Apache, please use user = apache and group = apache; if you want to use this PHP-FPM version with nginx, please use user = nginx and group = nginx.

vi /opt/php-5.4.12/etc/php-fpm.conf
[...]
pid = run/php-fpm.pid
[...]
user = nginx
group = nginx
[...]
listen = 127.0.0.1:8998
[...]
include=/opt/php-5.4.12/etc/pool.d/*.conf

Create the pool directory for PHP-FPM:

mkdir /opt/php-5.4.12/etc/pool.d

Next create an init script for PHP-FPM:

vi /etc/init.d/php-5.4.12-fpm
#! /bin/sh
### BEGIN INIT INFO
# Provides:          php-5.4.12-fpm
# Required-Start:    $all
# Required-Stop:     $all
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: starts php-5.4.12-fpm
# Description:       starts the PHP FastCGI Process Manager daemon
### END INIT INFO
php_fpm_BIN=/opt/php-5.4.12/sbin/php-fpm
php_fpm_CONF=/opt/php-5.4.12/etc/php-fpm.conf
php_fpm_PID=/opt/php-5.4.12/var/run/php-fpm.pid
php_opts="--fpm-config $php_fpm_CONF"

wait_for_pid () {
        try=0
        while test $try -lt 35 ; do
                case "$1" in
                        'created')
                        if [ -f "$2" ] ; then
                                try=''
                                break
                        fi
                        ;;
                        'removed')
                        if [ ! -f "$2" ] ; then
                                try=''
                                break
                        fi
                        ;;
                esac
                echo -n .
                try=`expr $try + 1`
                sleep 1
        done
}
case "$1" in
        start)
                echo -n "Starting php-fpm "
                $php_fpm_BIN $php_opts
                if [ "$?" != 0 ] ; then
                        echo " failed"
                        exit 1
                fi
                wait_for_pid created $php_fpm_PID
                if [ -n "$try" ] ; then
                        echo " failed"
                        exit 1
                else
                        echo " done"
                fi
        ;;
        stop)
                echo -n "Gracefully shutting down php-fpm "
                if [ ! -r $php_fpm_PID ] ; then
                        echo "warning, no pid file found - php-fpm is not running ?"
                        exit 1
                fi
                kill -QUIT `cat $php_fpm_PID`
                wait_for_pid removed $php_fpm_PID
                if [ -n "$try" ] ; then
                        echo " failed. Use force-exit"
                        exit 1
                else
                        echo " done"
                       echo " done"
                fi
        ;;
        force-quit)
                echo -n "Terminating php-fpm "
                if [ ! -r $php_fpm_PID ] ; then
                        echo "warning, no pid file found - php-fpm is not running ?"
                        exit 1
                fi
                kill -TERM `cat $php_fpm_PID`
                wait_for_pid removed $php_fpm_PID
                if [ -n "$try" ] ; then
                        echo " failed"
                        exit 1
                else
                        echo " done"
                fi
        ;;
        restart)
                $0 stop
                $0 start
        ;;
        reload)
                echo -n "Reload service php-fpm "
                if [ ! -r $php_fpm_PID ] ; then
                        echo "warning, no pid file found - php-fpm is not running ?"
                        exit 1
                fi
                kill -USR2 `cat $php_fpm_PID`
                echo " done"
        ;;
        *)
                echo "Usage: $0 {start|stop|force-quit|restart|reload}"
                exit 1
        ;;
esac

Make the init script executable and create the system startup links:

chmod 755 /etc/init.d/php-5.4.12-fpm
chkconfig --levels 235 php-5.4.12-fpm on

Finally start PHP-FPM:

/etc/init.d/php-5.4.12-fpm start

As long as there are no pools in /opt/php-5.4.12/etc/pool.d, you will get this warning which you can ignore:

[root@server1 php-5.4.12]# /etc/init.d/php-5.4.12-fpm start
Starting php-fpm [05-Mar-2013 19:37:55] WARNING: Nothing matches the include pattern '/opt/php-5.4.12/etc/pool.d/*.conf' from /opt/php-5.4.12/etc/php-fpm.conf at line 511.
done
[root@server1 php-5.4.12]#

That's it - if you like, you can now install some additional modules like APC, memcache, memcached, and ioncube.

The APC, memcache, and memcached modules can be installed through PEAR which we must install and initialize first:

yum install php-pear
cd /opt/php-5.4.12/etc
pecl -C ./pear.conf update-channels

APC can now be installed as follows:

pecl -C ./pear.conf install apc

Accept all default values. Afterwards, open /opt/php-5.4.12/lib/php.ini...

vi /opt/php-5.4.12/lib/php.ini

... and add the line extension=apc.so at the end of the file (you can also configure some additional APC settings):

[...]
extension=apc.so
apc.enabled=1
apc.shm_size=128M
apc.ttl=0
apc.user_ttl=600
apc.gc_ttl=600
apc.enable_cli=1
apc.mmap_file_mask=/tmp/apc.XXXXXX
;apc.mmap_file_mask=/dev/zero
;apc.shm_segments = 5

The memcache extension can be installed as follows:

pecl -C ./pear.conf install memcache 

Open /opt/php-5.4.12/lib/php.ini...

vi /opt/php-5.4.12/lib/php.ini

... and add the line extension=memcache.so at the end of the file:

[...]
extension=memcache.so

The memcached extension can be installed as follows:

yum install libmemcached-devel
pecl -C ./pear.conf install memcached

Open /opt/php-5.4.12/lib/php.ini...

vi /opt/php-5.4.12/lib/php.ini

... and add the line extension=memcached.so at the end of the file:

[...]
extension=memcached.so

The ionCube Loader can be installed as follows:

cd /tmp

Next download and unpack the correct ionCube Loader package for your architecture (x86_64 or x86).

For x86_64:

wget http://downloads2.ioncube.com/loader_downloads/ioncube_loaders_lin_x86-64.tar.gz
tar xfvz ioncube_loaders_lin_x86-64.tar.gz

For x86:

wget http://downloads2.ioncube.com/loader_downloads/ioncube_loaders_lin_x86.tar.gz
tar xfvz ioncube_loaders_lin_x86.tar.gz

Proceed as follows:

cp ioncube/ioncube_loader_lin_5.4.so /opt/php-5.4.12/lib/php/extensions/no-debug-non-zts-20100525/ioncube.so
vi /opt/php-5.4.12/lib/php.ini

Add the line zend_extension = /opt/php-5.4.12/lib/php/extensions/no-debug-non-zts-20100525/ioncube.so right at the beginning of the file (before the [PHP] line):

zend_extension = /opt/php-5.4.12/lib/php/extensions/no-debug-non-zts-20100525/ioncube.so
[PHP]
[...]

Reload PHP-FPM afterwards:

/etc/init.d/php-5.4.12-fpm reload

In ISPConfig 3.0.5, you can configure the new PHP version under System > Additional PHP Versions. On the Name tab, you just fill in a name for the PHP version (e.g. PHP 5.4.12) - this PHP version will be listed under this name in the website settings in ISPConfig:

Go to the PHP-FPM Settings tab (the FastCGI Settings tab can be left empty) and fill out the fields as follows:

Share this page:

1 Comment(s)