How To Set Up Software RAID1 On A Running System (Incl. GRUB Configuration) (CentOS 5.3) - Page 2

4 Creating Our RAID Arrays

Now let's create our RAID arrays /dev/md0, /dev/md1, and /dev/md2. /dev/sdb1 will be added to /dev/md0, /dev/sdb2 to /dev/md1, and /dev/sdb3 to /dev/md2. /dev/sda1, /dev/sda2, and /dev/sda3 can't be added right now (because the system is currently running on them), therefore we use the placeholder missing in the following three commands:

mdadm --create /dev/md0 --level=1 --raid-disks=2 missing /dev/sdb1
mdadm --create /dev/md1 --level=1 --raid-disks=2 missing /dev/sdb2
mdadm --create /dev/md2 --level=1 --raid-disks=2 missing /dev/sdb3

The command

cat /proc/mdstat

should now show that you have three degraded RAID arrays ([_U] or [U_] means that an array is degraded while [UU] means that the array is ok):

[root@server1 ~]# cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md2 : active raid1 sdb3[1]
      9759360 blocks [2/1] [_U]

md1 : active raid1 sdb2[1]
      522048 blocks [2/1] [_U]

md0 : active raid1 sdb1[1]
      200704 blocks [2/1] [_U]

unused devices: <none>
[root@server1 ~]#

Next we create filesystems on our RAID arrays (ext3 on /dev/md0 and /dev/md2 and swap on /dev/md1):

mkfs.ext3 /dev/md0
mkswap /dev/md1
mkfs.ext3 /dev/md2

Next we create /etc/mdadm.conf as follows:

mdadm --examine --scan > /etc/mdadm.conf

Display the contents of the file:

cat /etc/mdadm.conf

In the file you should now see details about our three (degraded) RAID arrays:

ARRAY /dev/md0 level=raid1 num-devices=2 UUID=78d582f0:940fabb5:f1c1092a:04a55452
ARRAY /dev/md1 level=raid1 num-devices=2 UUID=8db8f7e1:f2a64674:d22afece:4a539aa7
ARRAY /dev/md2 level=raid1 num-devices=2 UUID=1baf282d:17c58efd:a8de6947:b0af9792


5 Adjusting The System To RAID1

Now let's mount /dev/md0 and /dev/md2 (we don't need to mount the swap array /dev/md1):

mkdir /mnt/md0
mkdir /mnt/md2

mount /dev/md0 /mnt/md0
mount /dev/md2 /mnt/md2

You should now find both arrays in the output of


[root@server1 ~]# mount
/dev/sda3 on / type ext3 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
/dev/sda1 on /boot type ext3 (rw)
tmpfs on /dev/shm type tmpfs (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
/dev/md0 on /mnt/md0 type ext3 (rw)
/dev/md2 on /mnt/md2 type ext3 (rw)
[root@server1 ~]#

Next we modify /etc/fstab. Replace LABEL=/boot with /dev/md0, LABEL=SWAP-sda2 with /dev/md1, and LABEL=/ with /dev/md2 so that the file looks as follows:

vi /etc/fstab

/dev/md2                 /                       ext3    defaults        1 1
/dev/md0             /boot                   ext3    defaults        1 2
tmpfs                   /dev/shm                tmpfs   defaults        0 0
devpts                  /dev/pts                devpts  gid=5,mode=620  0 0
sysfs                   /sys                    sysfs   defaults        0 0
proc                    /proc                   proc    defaults        0 0
/dev/md1         swap                    swap    defaults        0 0

Next replace /dev/sda1 with /dev/md0 and /dev/sda3 with /dev/md2 in /etc/mtab:

vi /etc/mtab

/dev/md2 / ext3 rw 0 0
proc /proc proc rw 0 0
sysfs /sys sysfs rw 0 0
devpts /dev/pts devpts rw,gid=5,mode=620 0 0
/dev/md0 /boot ext3 rw 0 0
tmpfs /dev/shm tmpfs rw 0 0
none /proc/sys/fs/binfmt_misc binfmt_misc rw 0 0
sunrpc /var/lib/nfs/rpc_pipefs rpc_pipefs rw 0 0

Now up to the GRUB boot loader. Open /boot/grub/menu.lst and add fallback=1 right after default=0:

vi /boot/grub/menu.lst


This makes that if the first kernel (counting starts with 0, so the first kernel is 0) fails to boot, kernel #2 will be booted.

In the same file, go to the bottom where you should find some kernel stanzas. Copy the first of them and paste the stanza before the first existing stanza; replace root=LABEL=/ with root=/dev/md2 and root (hd0,0) with root (hd1,0):

title CentOS (2.6.18-128.el5)
        root (hd1,0)
        kernel /vmlinuz-2.6.18-128.el5 ro root=/dev/md2
        initrd /initrd-2.6.18-128.el5.img

title CentOS (2.6.18-128.el5)
        root (hd0,0)
        kernel /vmlinuz-2.6.18-128.el5 ro root=LABEL=/
        initrd /initrd-2.6.18-128.el5.img

The whole file should look something like this:

# grub.conf generated by anaconda
# Note that you do not have to rerun grub after making changes to this file
# NOTICE:  You have a /boot partition.  This means that
#          all kernel and initrd paths are relative to /boot/, eg.
#          root (hd0,0)
#          kernel /vmlinuz-version ro root=/dev/sda3
#          initrd /initrd-version.img
title CentOS (2.6.18-128.el5)
        root (hd1,0)
        kernel /vmlinuz-2.6.18-128.el5 ro root=/dev/md2
        initrd /initrd-2.6.18-128.el5.img

title CentOS (2.6.18-128.el5)
        root (hd0,0)
        kernel /vmlinuz-2.6.18-128.el5 ro root=LABEL=/
        initrd /initrd-2.6.18-128.el5.img

root (hd1,0) refers to /dev/sdb which is already part of our RAID arrays. We will reboot the system in a few moments; the system will then try to boot from our (still degraded) RAID arrays; if it fails, it will boot from /dev/sda (-> fallback 1).

Next we adjust our ramdisk to the new situation:

mv /boot/initrd-`uname -r`.img /boot/initrd-`uname -r`.img_orig
mkinitrd /boot/initrd-`uname -r`.img `uname -r`

Now we copy the contents of /dev/sda1 and /dev/sda3 to /dev/md0 and /dev/md2 (which are mounted on /mnt/md0 and /mnt/md2):

cp -dpRx / /mnt/md2

cd /boot
cp -dpRx . /mnt/md0


6 Preparing GRUB (Part 1)

Afterwards we must install the GRUB bootloader on the second hard drive /dev/sdb:


On the GRUB shell, type in the following commands:

root (hd0,0)

grub> root (hd0,0)
 Filesystem type is ext2fs, partition type 0x83


setup (hd0)

grub> setup (hd0)
 Checking if "/boot/grub/stage1" exists... no
 Checking if "/grub/stage1" exists... yes
 Checking if "/grub/stage2" exists... yes
 Checking if "/grub/e2fs_stage1_5" exists... yes
 Running "embed /grub/e2fs_stage1_5 (hd0)"...  15 sectors are embedded.
 Running "install /grub/stage1 (hd0) (hd0)1+15 p (hd0,0)/grub/stage2 /grub/grub.conf"... succeeded


root (hd1,0)

grub> root (hd1,0)
 Filesystem type is ext2fs, partition type 0xfd


setup (hd1)

grub> setup (hd1)
 Checking if "/boot/grub/stage1" exists... no
 Checking if "/grub/stage1" exists... yes
 Checking if "/grub/stage2" exists... yes
 Checking if "/grub/e2fs_stage1_5" exists... yes
 Running "embed /grub/e2fs_stage1_5 (hd1)"...  15 sectors are embedded.
 Running "install /grub/stage1 (hd1) (hd1)1+15 p (hd1,0)/grub/stage2 /grub/grub.conf"... succeeded



Now, back on the normal shell, we reboot the system and hope that it boots ok from our RAID arrays:


Share this page:

0 Comment(s)

Add comment


From: falko at: Sep 22, 2009