Your RAID has one FAULTY disk

Discussion in 'General' started by cubric, Jun 25, 2012.

  1. cubric

    cubric New Member

    Hello today i see this error... is only a system fault or i need to change the HDD?

    Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [raid10]
    md0 : active raid1 sdb1[1] sda1[0]
    2096064 blocks [2/2] [UU]

    md1 : active raid1 sdb2[2](F) sda2[0]
    524224 blocks [2/1] [U_]

    md2 : active raid1 sdb3[2](F) sda3[0]
    485764928 blocks [2/1] [U_]

    unused devices:

    i use CentOS 5.7
    Last edited: Jun 25, 2012
  2. Mark_NL

    Mark_NL Member

    If the disc is hot swappable, replace it. If the data on it is backed up, you could try rebooting, it might reinitialize correctly. Still the disc is currently faulty for a reason, so replacing is the best course of action.
  3. lano

    lano Member

    If you don't have hot swap, first check, that you have GRUB installed on both drives, or you might have problem booting up server (if failed drive is first drive). Usualy boortloader is installed only on hda.
  4. Mark_NL

    Mark_NL Member

    Ahh yes, classic root mistake ;-)
  5. cubric

    cubric New Member

    HELLO Mark & Lano,

    Thanks a lot for your Help i solved the problem with Best Support OF Hetzner

    I Reboot the Server and i Readd the drive to Array
    md2 : active raid1 sdb3[2] sda3[0]
          485764928 blocks [2/1] [U_]
          [==>..................]  recovery = 14.0% (68351296/485764928)
    finish=176.6min speed=39385K/sec

Share This Page