WEB UI FTP not working

Discussion in 'Installation/Configuration' started by gimhan90, Mar 15, 2006.

  1. gimhan90

    gimhan90 New Member

    HI..
    I can't upload files using my ISPConfig FTP WEB UI.Command line FTP is OK.Also can't chnage permissions there are error messages

    I am using VSFTPD as FTP Server.Here is the config file

    # Example config file /etc/vsftpd.conf
    #
    # The default compiled in settings are fairly paranoid. This sample file
    # loosens things up a bit, to make the ftp daemon more usable.
    # Please see vsftpd.conf.5 for all compiled in defaults.
    #
    # If you do not change anything here you will have a minimum setup for an
    # anonymus FTP server.
    #
    # READ THIS: This example file is NOT an exhaustive list of vsftpd options.
    # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
    # capabilities.

    # General Settings
    #
    # Uncomment this to enable any form of FTP write command.
    #
    write_enable=YES
    #
    # Activate directory messages - messages given to remote users when they
    # go into a certain directory.
    #
    dirmessage_enable=YES
    #
    # It is recommended that you define on your system a unique user which the
    # ftp server can use as a totally isolated and unprivileged user.
    #
    #nopriv_user=ftpsecure
    #
    # You may fully customise the login banner string:
    #
    ftpd_banner="Welcome to GalleLink...."
    #
    # You may activate the "-R" option to the builtin ls. This is disabled by
    # default to avoid remote users being able to cause excessive I/O on large
    # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
    # the presence of the "-R" option, so there is a strong case for enabling it.
    #
    ls_recurse_enable=YES
    #
    # You may specify a file of disallowed anonymous e-mail addresses. Apparently
    # useful for combatting certain DoS attacks.
    #
    #deny_email_enable=YES
    #
    # (default follows)
    #
    #banned_email_file=/etc/vsftpd.banned_emails
    #
    # If enabled, all user and group information in
    # directory listings will be displayed as "ftp".
    #
    #hide_ids=YES

    # Local FTP user Settings
    #
    # Uncomment this to allow local users to log in.
    #
    local_enable=YES
    #
    # Default umask for local users is 077. You may wish to change this to 022,
    # if your users expect that (022 is used by most other ftpd's)
    #
    #local_umask=022
    #
    # Uncomment to put local users in a chroot() jail in their home directory
    # after login.
    #
    #chroot_local_user=YES
    #
    # You may specify an explicit list of local users to chroot() to their home
    # directory. If chroot_local_user is YES, then this list becomes a list of
    # users to NOT chroot().
    #
    #chroot_list_enable=YES
    #
    # (default follows)
    #
    #chroot_list_file=/etc/vsftpd.chroot_list
    #
    # The maximum data transfer rate permitted, in bytes per second, for
    # local authenticated users. The default is 0 (unlimited).
    #
    #local_max_rate=7200


    # Anonymus FTP user Settings
    #
    # Allow anonymous FTP?
    #
    anonymous_enable=YES
    #
    # Anonymous users will only be allowed to download files which are
    # world readable.
    #
    anon_world_readable_only=YES
    #
    # Uncomment this to allow the anonymous FTP user to upload files. This only
    # has an effect if the above global write enable is activated. Also, you will
    # obviously need to create a directory writable by the FTP user.
    #
    #anon_upload_enable=YES
    #
    # Default umask for anonymus users is 077. You may wish to change this to 022,
    # if your users expect that (022 is used by most other ftpd's)
    #
    #anon_umask=022
    #
    # Uncomment this if you want the anonymous FTP user to be able to create
    # new directories.
    #
    #anon_mkdir_write_enable=YES
    #
    # Uncomment this to enable anonymus FTP users to perform other write operations
    # like deletion and renaming.
    #
    #anon_other_write_enable=YES
    #
    # If you want, you can arrange for uploaded anonymous files to be owned by
    # a different user. Note! Using "root" for uploaded files is not
    # recommended!
    #
    #chown_uploads=YES
    #chown_username=whoever
    #
    # The maximum data transfer rate permitted, in bytes per second, for anonymous
    # authenticated users. The default is 0 (unlimited).
    #
    #anon_max_rate=7200


    # Log Settings
    #
    # Log to the syslog daemon instead of using an logfile.
    #
    syslog_enable=YES
    #
    # Uncomment this to log all FTP requests and responses.
    #
    #log_ftp_protocol=YES
    #
    # Activate logging of uploads/downloads.
    #
    #xferlog_enable=YES
    #
    # You may override where the log file goes if you like. The default is shown
    # below.
    #
    #vsftpd_log_file=/var/log/vsftpd.log
    #
    # If you want, you can have your log file in standard ftpd xferlog format.
    # Note: This disables the normal logging unless you enable dual_log_enable below.
    #
    #xferlog_std_format=YES
    #
    # You may override where the log file goes if you like. The default is shown
    # below.
    #
    #xferlog_file=/var/log/xferlog
    #
    # Enable this to have booth logfiles. Standard xferlog and vsftpd's own style log.
    #
    #dual_log_enable=YES
    #
    # Uncomment this to enable session status information in the system process listing.
    #
    #setproctitle_enable=YES

    # Transfer Settings
    #
    # Make sure PORT transfer connections originate from port 20 (ftp-data).
    #
    connect_from_port_20=YES
    #
    # You may change the default value for timing out an idle session.
    #
    #idle_session_timeout=600
    #
    # You may change the default value for timing out a data connection.
    #
    #data_connection_timeout=120
    #
    # Enable this and the server will recognise asynchronous ABOR requests. Not
    # recommended for security (the code is non-trivial). Not enabling it,
    # however, may confuse older FTP clients.
    #
    #async_abor_enable=YES
    #
    # By default the server will pretend to allow ASCII mode but in fact ignore
    # the request. Turn on the below options to have the server actually do ASCII
    # mangling on files when in ASCII mode.
    # Beware that turning on ascii_download_enable enables malicious remote parties
    # to consume your I/O resources, by issuing the command "SIZE /big/file" in
    # ASCII mode.
    # These ASCII options are split into upload and download because you may wish
    # to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),
    # without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be
    # on the client anyway..
    #
    #ascii_upload_enable=YES
    #ascii_download_enable=YES
    #
    # Set to NO if you want to disallow the PASV method of obtaining a data
    # connection.
    #
    #pasv_enable=NO

    # PAM setting. Do NOT change this unless you know what you do!
    #
    pam_service_name=vsftpd

    # Set listen=YES if you want vsftpd to run standalone
    #
    #listen=YES
     
  2. falko

    falko Super Moderator

    Please enable

    Code:
    local_umask=022
    chroot_local_user=YES
    in /etc/vsftpd.conf and restart vsftpd.
     
  3. gimhan90

    gimhan90 New Member

    WEB UI FTP Error

    Thanks a lot falko..it's working now
     

Share This Page