Vmware ISPConfig UBUNTU server

Discussion in 'General' started by tanismezz, Oct 5, 2006.

  1. tanismezz

    tanismezz New Member

    Hi all
    I have download The_Perfect_Setup_-_Ubuntu_6.06_LTS_Server__Dapper_Drake_ (image for VMWARE)

    But my network not work i no have ethernet

    i type ifconfig

    no have eth0 or eth1, i have only lo device in virtual conputer.

    My real ethernet in real computer is eth1 (dhcp) and i have setting vmware en bridge mode (not work) and NAT (not work)

    please help

    ps. sorry for my english bad
    Last edited: Oct 5, 2006
  2. sjau

    sjau Local Meanie Moderator

    is eth1 a wifi card? If so brigded mode won't work.
    Furthermore if you use brigded mode you need to make sure that you can get another IP address (by dhcp). If you are not behind a router and your ISP assigns you only 1 IP then bridged mode won't work.
  3. tanismezz

    tanismezz New Member

    eth1 is a real ethernet no have wi fi

    and i m behind a router

    if i type ifconfig in virtual computer no have any ethernet installed only lo
  4. fobicodam

    fobicodam ISPConfig Developer ISPConfig Developer

    Where are you from?

    If you can only see the ip address its because your linux doesnt recognize the AMD ethernet virtual card.

    Did you read the VMWare network help? its ot easy to config if you are a newbie.

    With NAT you must allow windows to route between you internet conection and the vmnet card (NAT i believe its usually the VNet1). If you have static ips you would use the direct access vmwre option, but you must set a static external ip address for your linux.
  5. falko

    falko Super Moderator ISPConfig Developer

    Which subnet do you use for your LAN? Is it

    What's the output of
    on the virtual machine?
  6. tanismezz

    tanismezz New Member

    if i type ifconfig on my virtual machine

    NO have eternet

    only lo

    i have downoad other image of virtual machine http://www.vmware.com/vmtn/appliances/directory/342 with
    and all ok i have in this virtual machine network
    if type i have etho

    please help to start network in virtual machine The_Perfect_Setup_-_Ubuntu_6.06_LTS_Server__Dapper_Drake
  7. till

    till Super Moderator Staff Member ISPConfig Developer

    Please download the dapper drake image, when you start it the first time in VMWare, you must select to keep your mac address, otherwise you will loose your eth0 network card.
  8. tanismezz

    tanismezz New Member

    sorry i no undestand your suggestion.

    my english is bad.
  9. till

    till Super Moderator Staff Member ISPConfig Developer

    When you first start a vmware image in the vmware server or player you will be asked if you want to keep the mac address, you must choose "yes", otherwise your network adapter wont work anymore.

Share This Page