Virtual Multiserver Environment With Dedicated Server

Discussion in 'Installation/Configuration' started by abintipl, May 22, 2013.

  1. abintipl

    abintipl New Member

    Dear all,

    I have a dedicated server with 8 GB Ram, 6 IPS , 500GB HDD, KVM - HP ILO with pre - install Debian Squeeze 6 co-located in a Data-center & have set up successfully OpenVZ using following thread;

    http://www.howtoforge.com/virtual-m...ns-servers-on-debian-squeeze-with-ispconfig-3

    For some reasons, I had to re-install Debain OS & have had some issues on 'Configure Network Settings" which I have addressed to my data-center support but was not answered due to un-managed server agreement.

    Any ways, I would request the community as well as Experts to please spare some time for me to confirm the following steps which I have done are correct;

    First I installed the base install as per tutorial provided http://www.howtoforge.com/perfect-server-debian-squeeze-with-bind-and-dovecot-ispconfig-3

    When I got to Server Network settings,

    Name Servers : " I have chosen Google Public DNS 8.8.8.8 & 8.8.4.4

    Primary Network Interface
    Eth0
    Eth1 " I have chosen etho"

    > Continue

    Configure Network Manually ( I selected this since this server is not on DHCP)

    > Continue

    > Then following IP in the field
    IP address : xxx.xxx.xxx.xxx

    Then given following in Netmask
    "as provided by data center 255.255.255.xxx"

    Gateway :
    "as provided by data center xxx.xxx.xxx.12"

    Name Server Addresses:

    > 8.8.8.8 8.8.4.4

    Some of my configurations files are as under;

    vi /etc/network/interfaces

    # This file describes the network interfaces available on your system
    # and how to activate them. For more information, see interfaces(5).

    # The loopback network interface
    auto lo
    iface lo inet loopback

    # The primary network interface
    allow-hotplug eth0
    #Ques+(Do I need to comment this#allow-hotplug etho)
    iface eth0 inet static
    address xxx.xxx.xxx.xx8
    netmask 255.255.255.xxx
    network xxx.xxx.xxx.xx6
    broadcast xxx.xxx.xxx.xxx
    gateway xxx.xxx.xxx.xxx
    # dns-* options are implemented by the resolvconf package, if installed
    dns-search mydomain.com

    root@server1:~# vi /etc/resolv.conf

    search mydomain.com
    nameserver 8.8.8.8
    nameserver 8.8.4.4

    vi /etc/apt/sources.list

    #

    # deb cdrom:[Debian GNU/Linux 6.0.5 _Squeeze_ - Official amd64 NETINST Binary-1 20120512-20:40]/ squeeze main

    #deb cdrom:[Debian GNU/Linux 6.0.5 _Squeeze_ - Official amd64 NETINST Binary-1 20120512-20:40]/ squeeze main

    deb http://ftp.de.debian.org/debian squeeze main non-free contrib
    deb-src http://ftp.de.debian.org/debian squeeze main non-free contrib

    deb http://security.debian.org/ squeeze/updates main contrib non-free
    deb-src http://security.debian.org/ squeeze/updates main contrib non-free

    # squeeze-updates, previously known as 'volatile'
    deb http://ftp.de.debian.org/debian squeeze-updates main contrib non-free
    deb-src http://ftp.de.debian.org/debian squeeze-updates main contrib non-free
    deb http://ftp.de.debian.org/debian/ squeeze-updates main


    Thanking you and looking forward to your comments

    Regards,
    Abin
     
  2. abintipl

    abintipl New Member

    Question about OpenVZ

    Hi,

    I have installed Virtual multiserver environment from tutorial on

    http://www.howtoforge.com/virtual-m...ns-servers-on-debian-squeeze-with-ispconfig-3

    Having

    Type: Node
    Hardware: Dedicated
    Hostname: root.example.tld
    192.168.1.1
    Type: Container
    Hardware: Virtual
    Hostname: web.example.tld
    192.168.1.2
    Type: Container
    Hardware: Virtual
    Hostname: mail.example.tld
    192.168.1.3
    Type: Container
    Hardware: Virtual
    Hardware: Virtual

    Hostname: mail1.example.tld ( One extra Mail Server)
    192.168.1.4
    Type: Container
    Hardware: Virtual
    Hostname: ns1.example.tld
    192.168.1.5
    Type: Container
    Hardware: Virtual
    Hostname: ns2.example.tld
    192.168.1.6


    My question is

    Type: Node
    Hardware: Dedicated
    Hostname: root.example.tld
    192.168.1.1

    Does this IP used only for Managing OpenVZ or can I also install this as either Web or mail or Database Server?

    Thanks & regards,

    Abin
     

Share This Page