Upgrading Dapper to Edgy with aptitude dist-upgrade

Discussion in 'Installation/Configuration' started by roolet, Oct 29, 2006.

  1. roolet

    roolet New Member

    I'm following the instructions on ubuntuguide.org for upgrading my Dapper Server to an Edgy Server. (There were no guides here, so I had to take the next best route!) I'd initially followed the "Perfect Install" walkthrough on here for getting Dapper set up. I took the advice at ubuntuguide.org for upgrading to Edgy - changed the sources and used aptitude dist-upgrade.

    It seems to be upgrading everything, not just the OS. So far it's asked me lots of questions about keeping my old conf files or replacing them with the new ones. I had questions about this on proftpd, mime and mysql server. Probably at least one more that I'm forgetting now.

    The other issue is with configuring courier. It keeps hanging on upgrading courier.

    Should I be concerned with either of these issues and if so, what steps will I need to take? Also, should I anticipate any problems with ISPConfig once it's done? (I'm not too worried about courier. So far I've been able to send mail out but I've not been able to configure my MX pointers correctly through Dyndns to get my incoming mailserver accepting anything. Courier is the least of my problems -- this is a locally hosted testing server only.)

    Bear in mind, I just set up the Dapper server a few weeks back, so I've barely broken it in and have never had to restart it.

    EDIT post upgrade: OK, nearly everything came out alright by always choosing "no" if it asked me about replacing config files. However, at the very end, it spat out the following:

    Code:
    Errors were encountered while processing:
     courier-authlib-userdb
     courier-base
     courier-authdaemon
     courier-imap
     courier-ssl
     courier-pop
     courier-pop-ssl
     courier-imap-ssl
    Suggestions as to what to do about this?
     
    Last edited: Oct 29, 2006
  2. sbovisjb1

    sbovisjb1 ISPConfig Developer ISPConfig Developer

    Which method did you use? I hope you are aware that sysvinit is no longer in use and upstart is now the method of choice. Also dont forget that you have to configure your X-server with
    Code:
     
    sudo dpkg-reconfigure xserver-xorg 
    
    If you didn't do that or it didn't work, try this

    Code:
     
    gksu “update-manager -c -d” 
    
    The package manager checks for both beta versions as edgy is still listed as such. That should fix any problems you have. Don't forget to update any necessary packages that you may need. The main problem most likely is the x server problem.

    References: http://digg.com/linux_unix/Ubuntu_Edgy_Upgrades_a_Disaster_for_Many
    http://www.howtogeek.com/howto/ubuntu/upgrading-ubuntu-from-dapper-to-edgy-with-update-manager/
     
  3. roolet

    roolet New Member

    Whoa, fun, it's like learning a foreign language all over again. My accent was always better than my vocabulary. :p

    I used Method B. bash didn't recognize gksudo or gedit.

    I have no idea what sysvinit or upstart is. xserver-xorg is not installed. All I had on the box is what Falko included in the Dapper server config. The only things I did from ubuntuguide are in this section.

    All told I think it went reasonably well using aptitude dist-upgrade, except for the courier issues, which weren't working all that well to begin with.

    It should be noted that I'm not using the desktop version. I've got no GUI to work with here.
     
    Last edited: Oct 29, 2006
  4. falko

    falko Super Moderator ISPConfig Developer

    Are there any errors related to this in your mail log? What's the output of
    Code:
    netstat -tap
    ?
     
  5. roolet

    roolet New Member

    Output of netstat -tap:

    Code:
    (No info could be read for "-p": geteuid()=1000 but you should be root.)
    Active Internet connections (servers and established)
    Proto Recv-Q Send-Q Local Address           Foreign Address         State
    PID/Program name
    tcp        0      0 *:mysql                 *:*                     LISTEN     -
    tcp        0      0 *:81                    *:*                     LISTEN     -
    tcp        0      0 192.168.1.100:domain    *:*                     LISTEN     -
    tcp        0      0 localhost.locald:domain *:*                     LISTEN     -
    tcp        0      0 *:smtp                  *:*                     LISTEN     -
    tcp        0      0 localhost.localdoma:953 *:*                     LISTEN     -
    tcp        0      0 192.168.1.100:4695      adsl-(host-mask):mysql ESTABLISHED-
    tcp        0      0 192.168.1.100:4693      adsl-(host-mask):mysql ESTABLISHED-
    tcp        0      0 localhost.localdom:1857 localhost.localdoma:www TIME_WAIT  -
    tcp        0      0 192.168.1.100:mysql     adsl-(host-mask):1256 ESTABLISHED-
    tcp        0      0 localhost.localdom:2668 localhost.localdoma:ftp TIME_WAIT  -
    tcp6       0      0 *:www                   *:*                     LISTEN     -
    tcp6       0      0 *:ftp                   *:*                     LISTEN     -
    tcp6       0      0 *:ssh                   *:*                     LISTEN     -
    tcp6       0      0 *:smtp                  *:*                     LISTEN     -
    tcp6       0      0 ip6-localhost:953       *:*                     LISTEN     -
    tcp6       0      0 *:https                 *:*                     LISTEN     -
    tcp6       0    148 ::ffff:192.168.1.10:ssh ::ffff:192.:unix-status ESTABLISHED-
    
    Mail error log:
    Code:
    Oct 15 15:18:28 (servername) imaplogin: DISCONNECTED, ip=[::ffff:209.132.114.210], time=0
    Mail log:
    Code:
    Oct 29 23:59:25 (servername) postfix/master[16470]: daemon started -- version 2.3.3, configuration /etc/postfix
    Oct 30 06:55:44 (servername)  postfix/smtpd[23565]: connect from 59-117-202-247.dynamic.hinet.net[59.117.202.247]
    Oct 30 06:55:46 (servername)  postfix/smtpd[23565]: NOQUEUE: reject: RCPT from 59-117-202-247.dynamic.hinet.net[59.117.202.$
    Oct 30 06:55:46 (servername)  postfix/smtpd[23565]: lost connection after RCPT from 59-117-202-247.dynamic.hinet.net[59.117$
    Oct 30 06:55:46 (servername)  postfix/smtpd[23565]: disconnect from 59-117-202-247.dynamic.hinet.net[59.117.202.247]
    Oct 30 06:59:06 (servername)  postfix/anvil[23570]: statistics: max connection rate 1/60s for (smtp:59.117.202.247) at Oct $
    Oct 30 06:59:06 (servername) postfix/anvil[23570]: statistics: max connection count 1 for (smtp:59.117.202.247) at Oct 30 $
    Oct 30 06:59:06 (servername)  postfix/anvil[23570]: statistics: max cache size 1 at Oct 30 06:55:44
    Oct 30 07:17:48 (servername)  postfix/smtpd[23855]: connect from 218-167-64-29.dynamic.hinet.net[218.167.64.29]
    Oct 30 07:17:49 (servername)  postfix/smtpd[23855]: NOQUEUE: reject: RCPT from 218-167-64-29.dynamic.hinet.net[218.167.64.2$
    Oct 30 07:17:50 (servername)  postfix/smtpd[23855]: lost connection after RCPT from 218-167-64-29.dynamic.hinet.net[218.167$
    Oct 30 07:17:50 (servername) postfix/smtpd[23855]: disconnect from 218-167-64-29.dynamic.hinet.net[218.167.64.29]
    Oct 30 07:21:10 (servername)  postfix/anvil[23857]: statistics: max connection rate 1/60s for (smtp:218.167.64.29) at Oct 3$
    Oct 30 07:21:10 (servername)  postfix/anvil[23857]: statistics: max connection count 1 for (smtp:218.167.64.29) at Oct 30 0$
    Oct 30 07:21:10 (servername)  postfix/anvil[23857]: statistics: max cache size 1 at Oct 30 07:17:48
    Oct 30 09:10:37 (servername)  postfix/smtpd[25605]: connect from localhost[127.0.0.1]
    Oct 30 09:10:37 (servername)  postfix/smtpd[25605]: lost connection after CONNECT from localhost[127.0.0.1]
    Oct 30 09:10:37 (servername)  postfix/smtpd[25605]: disconnect from localhost[127.0.0.1]
    
    Also of note: prior to the upgrade I had been able to log in to webmail through ISPConfig and send mails out. Now I cannot do so, am getting the following errors:
    Code:
     Warning: fsockopen() [function.fsockopen]: unable to connect to localhost:110 (Connection refused) in /home/admispconfig/ispconfig/web/webmail/inc/class.uebimiau_mail.php on line 66
    
    Warning: Cannot modify header information - headers already sent by (output started at /home/admispconfig/ispconfig/web/webmail/inc/class.uebimiau_mail.php:66) in /home/admispconfig/ispconfig/web/webmail/msglist.php on line 64
     
  6. domino

    domino New Member

    many a problems upgrading from Dapper to Edgy, from hardware to software issues. I would do my research before dist-upgrade. maybe too late? :)
     
  7. falko

    falko Super Moderator ISPConfig Developer

    What happens when you try to restart Courier?
    Code:
    /etc/init.d/courier-pop restart
    /etc/init.d/courier-imap restart
     
  8. roolet

    roolet New Member

    Actually, I did a full restart, which brought courier back up, but it's still not accepting mail.

    Current netstat -tap is now:

    Code:
    Active Internet connections (servers and established)
    Proto Recv-Q Send-Q Local Address           Foreign Address         State
    PID/Program name
    tcp        0      0 *:mysql                 *:*                     LISTEN     3
    787/mysqld
    tcp        0      0 *:81                    *:*                     LISTEN     4
    145/ispconfig_http
    tcp        0      0 192.168.1.100:domain    *:*                     LISTEN     4
    394/named
    tcp        0      0 localhost.locald:domain *:*                     LISTEN     4
    394/named
    tcp        0      0 *:smtp                  *:*                     LISTEN     1
    5184/master
    tcp        0      0 localhost.localdoma:953 *:*                     LISTEN     4
    394/named
    tcp6       0      0 *:imaps                 *:*                     LISTEN     3
    653/couriertcpd
    tcp6       0      0 *:pop3s                 *:*                     LISTEN     3
    688/couriertcpd
    tcp6       0      0 *:pop3                  *:*                     LISTEN     3
    668/couriertcpd
    tcp6       0      0 *:imap2                 *:*                     LISTEN     3
    633/couriertcpd
    tcp6       0      0 *:www                   *:*                     LISTEN     4
    252/apache2
    tcp6       0      0 *:ftp                   *:*                     LISTEN     1
    5088/proftpd: (acc
    tcp6       0      0 *:ssh                   *:*                     LISTEN     3
    970/sshd
    tcp6       0      0 *:smtp                  *:*                     LISTEN     1
    5184/master
    tcp6       0      0 ip6-localhost:953       *:*                     LISTEN     4
    394/named
    tcp6       0      0 *:https                 *:*                     LISTEN     4
    252/apache2
    tcp6       0    148 ::ffff:192.168.1.10:ssh ::ffff:192.168.1.2:1344 ESTABLISHED3
    2458/sshd: (username)
    
    New Mail log:

    Code:
    Oct 31 03:37:05 (servername) postfix/smtpd[18038]: NOQUEUE: reject: RCPT from 61-216-80-74.dynamic.hinet.net[61.216.80$
    Oct 31 03:37:06 (servername) postfix/smtpd[18038]: lost connection after RCPT from 61-216-80-74.dynamic.hinet.net[61.2$
    Oct 31 03:37:06 (servername) postfix/smtpd[18038]: disconnect from 61-216-80-74.dynamic.hinet.net[61.216.80.74]
    Oct 31 03:40:26 (servername) postfix/anvil[18040]: statistics: max connection rate 1/60s for (smtp:61.216.80.74) at Oc$
    Oct 31 03:40:26 (servername) postfix/anvil[18040]: statistics: max connection count 1 for (smtp:61.216.80.74) at Oct 3$
    Oct 31 03:40:26 (servername) postfix/anvil[18040]: statistics: max cache size 1 at Oct 31 03:37:04
    Oct 31 06:38:02 (servername) postfix/smtpd[20460]: connect from 220-139-249-179.dynamic.hinet.net[220.139.249.179]
    Oct 31 06:38:03 (servername) postfix/smtpd[20460]: NOQUEUE: reject: RCPT from 220-139-249-179.dynamic.hinet.net[220.13$
    Oct 31 06:38:03 (servername) postfix/smtpd[20460]: lost connection after RCPT from 220-139-249-179.dynamic.hinet.net[2$
    Oct 31 06:38:03 (servername) postfix/smtpd[20460]: disconnect from 220-139-249-179.dynamic.hinet.net[220.139.249.179]
    Oct 31 06:41:23 (servername)postfix/anvil[20462]: statistics: max connection rate 1/60s for (smtp:220.139.249.179) at$
    Oct 31 06:41:23 (servername) postfix/anvil[20462]: statistics: max connection count 1 for (smtp:220.139.249.179) at Oc$
    Oct 31 06:41:23 (servername) postfix/anvil[20462]: statistics: max cache size 1 at Oct 31 06:38:02
    
    One thing that I did notice is that when I try to point the MX record to the server over at dyndns, it gets routed instead to the other box I've got here sharing the same IP.
     
  9. falko

    falko Super Moderator ISPConfig Developer

    I don't see any lins for Courier in your mail log, only Postfix...

    Can you restart Courier and post the error messages here, if there are any?
     

Share This Page