Ubuntu 6.06 installation error

Discussion in 'Installation/Configuration' started by jacobhenry, Jul 4, 2006.

  1. jacobhenry

    jacobhenry New Member

    I have followed the Ubuntu 6.06 perfect setup without any problem but when I try to install ISPConfig I get this error:

    Code:
    RC4_CHUNK is undefined
    sh: make: command not found
    ./compile: line 116: make: command not found
    ERROR: Could not make OpenSSL
    cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
    mv: cannot stat `binaries/aps.tar.gz': No such file or directory
    mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
    mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
    mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
    mv: cannot stat `binaries/cronolog': No such file or directory
    mv: cannot stat `binaries/cronosplit': No such file or directory
    mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
    mv: cannot stat `binaries/zip': No such file or directory
    mv: cannot stat `binaries/unzip': No such file or directory
    tar: spamassassin.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `spamassassin': No such file or directory
    tar: uudeview.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `uudeview': No such file or directory
    tar: clamav.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `clamav': No such file or directory
    tar: aps.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    ./setup2: line 794: ispconfig_tmp/php/bin/php: No such file or directory
    ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!
    
    Any suggestions?
     
  2. jacobhenry

    jacobhenry New Member

    I had a problem with these steps.

    Code:
    mkdir /etc/postfix/ssl
    cd /etc/postfix/ssl/
    openssl genrsa -des3 -rand /etc/hosts -out smtpd.key 1024
    chmod 600 smtpd.key
    openssl req -new -key smtpd.key -out smtpd.csr
    openssl x509 -req -days 3650 -in smtpd.csr -signkey smtpd.key -out smtpd.crt
    openssl rsa -in smtpd.key -out smtpd.key.unencrypted
    mv -f smtpd.key.unencrypted smtpd.key
    openssl req -new -x509 -extensions v3_ca -keyout cakey.pem -out cacert.pem -days 3650
    
    when I ran:
    Code:
    openssl genrsa -des3 -rand /etc/hosts -out smtpd.key 1024
    
    it asked me for the smtp.key and I just used my password except it returned an error.

    I hope this information can help you help me.
     
  3. CombatGod

    CombatGod New Member

    This is just a shot in the dark since I haven't even had a chance to really take a look at the Ubuntu 6.06 install. I'm currently using Breezy Badger and have not yet upgraded but it seems like openssl isn't properly installed.

    I would try:

    Code:
    $sudo apt-get remove openssl
    $sudo apt-get install openssl
     
  4. falko

    falko Super Moderator

    You must install make:
    Code:
    apt-get install make
     
  5. lieumorrison

    lieumorrison New Member

    I am using the "The Perfect Setup - Ubuntu 6.06 LTS Server" instructions, with a fresh Xubuntu 6.06 install. I get his error far into the compiling...

    Code:
    [...]
    cp -f clamassassin /home/admispconfig/ispconfig/tools/clamav/bin
    chmod 555 /home/admispconfig/ispconfig/tools/clamav/bin/clamassassin
    What email address or URL should be used in the suspected-spam report
    text for users who want more information on your filter installation?
    (In particular, ISPs should change this to a local Postmaster contact)
    default text: [the administrator of that system]
    
    NOTE: settings for "make test" are now controlled using "t/config.dist".
    See that file if you wish to customise what tests are run, and how.
    
    checking module dependencies and their versions...
    
    ***************************************************************************
    ERROR: the required Digest::SHA1 module is not installed.
    
      The Digest::SHA1 module is used as a cryptographic hash for some
      tests and the Bayes subsystem.  It is also used by Razor2.
    
    
    ***************************************************************************
    ERROR: the required HTML::Parser (version 3.24) module is not installed.
    
      Version 3.31 or later is recommended.
    
      HTML is used for an ever-increasing amount of email so this dependency
      is unavoidable.  Run "perldoc -q html" for additional information.
    
    
    ***************************************************************************
    NOTE: the optional Net::DNS (version 0.34) module is not installed.
    
      Used for all DNS-based tests (SBL, XBL, SpamCop, DSBL, etc.),
      perform MX checks, and is also used when manually reporting spam to
      SpamCop.  Recommended.
    
      If this is installed and you are using network tests of any variety
      (which is the default), then you need to make sure the Net::DNS
      version is sufficiently up-to-date:
    
      - version 0.34 or higher on Unix systems
      - version 0.46 or higher on Windows systems
    
    
    ***************************************************************************
    NOTE: the optional Mail::SPF::Query module is not installed.
    
      Used to check DNS Sender Policy Framework (SPF) records to fight email
      address forgery and make it easier to identify spams.
    
    
    ***************************************************************************
    NOTE: the optional IP::Country module is not installed.
    
      Used by the RelayCountry plugin (not enabled by default) to determine
      the domain country codes of each relay in the path of an email.
    
    
    ***************************************************************************
    NOTE: the optional Razor2 (version 2.61) module is not installed.
    
      Used to check message signatures against Vipul's Razor collaborative
      filtering network. Razor has a large number of dependencies on CPAN
      modules. Feel free to skip installing it, if this makes you nervous;
      SpamAssassin will still work well without it.
    
      More info on installing and using Razor can be found
      at http://wiki.apache.org/spamassassin/InstallingRazor .
    
    
    ***************************************************************************
    NOTE: the optional Net::Ident module is not installed.
    
      If you plan to use the --auth-ident option to spamd, you will need
      to install this module.
    
    
    ***************************************************************************
    NOTE: the optional IO::Socket::INET6 module is not installed.
    
      This is required if the first nameserver listed in your IP
      configuration or /etc/resolv.conf file is available only via
      an IPv6 address.
    
    
    ***************************************************************************
    NOTE: the optional IO::Socket::SSL module is not installed.
    
      If you wish to use SSL encryption to communicate between spamc and
      spamd (the --ssl option to spamd), you need to install this
      module. (You will need the OpenSSL libraries and use the
      ENABLE_SSL="yes" argument to Makefile.PL to build and run an SSL
      compatibile spamc.)
    
    
    ***************************************************************************
    NOTE: the optional LWP::UserAgent module is not installed.
    
      The "sa-update" script requires this module to make HTTP requests.
    
    
    ***************************************************************************
    NOTE: the optional HTTP::Date module is not installed.
    
      The "sa-update" script requires this module to make HTTP
      If-Modified-Since GET requests.
    
    
    ***************************************************************************
    NOTE: the optional Archive::Tar module is not installed.
    
      The "sa-update" script requires this module to access tar update
      archive files.
    
    
    ***************************************************************************
    NOTE: the optional IO::Zlib module is not installed.
    
      The "sa-update" script requires this module to access compressed
      update archive files.
    
    REQUIRED module missing: Digest::SHA1
    REQUIRED module missing: HTML::Parser
    optional module missing: Net::DNS
    optional module missing: Mail::SPF::Query
    optional module missing: IP::Country
    optional module missing: Razor2
    optional module missing: Net::Ident
    optional module missing: IO::Socket::INET6
    optional module missing: IO::Socket::SSL
    optional module missing: LWP::UserAgent
    optional module missing: HTTP::Date
    optional module missing: Archive::Tar
    optional module missing: IO::Zlib
    
    warning: some functionality may not be available,
    please read the above report before continuing!
    
    ERROR: Could not configure SpamAssassin
    cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
    mv: cannot stat `binaries/aps.tar.gz': No such file or directory
    mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
    mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
    mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
    mv: cannot stat `binaries/cronolog': No such file or directory
    mv: cannot stat `binaries/cronosplit': No such file or directory
    mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
    mv: cannot stat `binaries/zip': No such file or directory
    mv: cannot stat `binaries/unzip': No such file or directory
    tar: spamassassin.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `spamassassin': No such file or directory
    tar: uudeview.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `uudeview': No such file or directory
    tar: clamav.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `clamav': No such file or directory
    tar: aps.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    ./setup2: line 794: ispconfig_tmp/php/bin/php: No such file or directory
    ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!
    
    Suggestions? This is my third attempt.
     
  6. till

    till Super Moderator

Share This Page