Trouble with upgrade from 3.0.2 to 3.0.3

Discussion in 'Installation/Configuration' started by DreamK, Dec 17, 2010.

  1. DreamK

    DreamK New Member

    Hi,

    Little post for having some advice as regard a bad upgrade from 3.0.2 to 3.0.3

    I have a multiserver installation, like this :

    Server1 is the master with main services mySQL and postfix
    Server2 is the slave with main services apache, pureftp, postfix as mxbackup

    I have a backup of the database functionnal with 3.0.2

    The present errors are :

    Server1 :

    14-12-2010 00:30 Server1 Warning DB::query(DELETE FROM
    I have tryed to fixe this adding the endest field "action_status, seems to work, I don't have the notice anylonger

    Overall, it s the bad point about postfix and amavist-new :
    - all incoming mail are rejected cause "spam"
    - in ISPC3 admin GUI > email domain : server+client+spam filter+0/I are ok but there is no domain name

    I have two informations :
    - 554 554 5.7.1

    - In /etc/postfix/main.cf I have erased the line smtpd_recipient_restrictions cause :

    Afterward, I have made a purge of amavist-new and erased the amavist-User. Postfix is ok with lot of spams.

    At the present time, I ask me if that will be more efficient to :
    1/ upload the backup
    2/ proceed to the automatic upgrade of ISPC3

    I thank you in advance for your help,

    Regards,

    Yoan
     
  2. till

    till Super Moderator Howtoforge Staff HowtoForge Supporter ISPConfig Developer

    Please undo that as this change will cause the database to be erased at the next update attempt. This is a issue thats already fixed in 3.0.3.1. You should have better installed 3.0.3.1 right away.

    I dont understand what you mean with that. Please post a screenhsot.

    To get the system to work again, please undo all the changes that you did in the amavisd setup before you update to 3.0.3.1 as it might be that even reinstalling amavisd will not fix the changes you did like the removal of the amavis user. You might better have asked before you did that... If you would have wanted to disable just amavisd, you could have commented out just one line in main.cf. Its all described in the ispconfig faq.
     
  3. DreamK

    DreamK New Member

    Amavist was still running and was causing the error.


    I let the thumbnail for the empty fields into the db.

    To solve this, Should I install ISPC3.0.2 upload the ispconfig from 3.0.2 and afterward make an upgrade to 3.0.3 ?
     

    Attached Files:

  4. till

    till Super Moderator Howtoforge Staff HowtoForge Supporter ISPConfig Developer

    The screenshot looks fine. You have enabled the domain locking mode to prevent that clients can enter domain names. Maybe that was not your intention? Then you should disable it agai under system > interface config.

    regarding amavisd, please post the postfix main.cf and master.cf files.
     
  5. DreamK

    DreamK New Member

    Code:
    I have reinstalled amavist and seems to be ok :
    
    # See /usr/share/postfix/main.cf.dist for a commented, more complete version
    
    
    # Debian specific:  Specifying a file name will cause the first
    # line of that file to be used as the name.  The Debian default
    # is /etc/mailname.
    #myorigin = /etc/mailname
    
    smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU)
    biff = no
    
    # appending .domain is the MUA's job.
    append_dot_mydomain = no
    
    # Uncomment the next line to generate "delayed mail" warnings
    #delay_warning_time = 4h
    
    readme_directory = /usr/share/doc/postfix
    
    # TLS parameters
    smtpd_tls_cert_file = /etc/postfix/smtpd.cert
    smtpd_tls_key_file = /etc/postfix/smtpd.key
    smtpd_use_tls = yes
    smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
    smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache
    
    # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for
    # information on enabling SSL in the smtp client.
    
    alias_maps = hash:/etc/aliases
    alias_database = hash:/etc/aliases
    myorigin = /etc/mailname
    mydestination = server1, localhost, localhost.localdomain
    mailbox_command = procmail -a "$EXTENSION"
    mailbox_size_limit = 0
    recipient_delimiter = +
    html_directory = /usr/share/doc/postfix/html
    virtual_alias_domains = 
    virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, mysql:/etc/postfix/mysql-virtual_email2email.cf
    virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf
    virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf
    virtual_mailbox_base = /home/email/
    virtual_uid_maps = static:5000
    virtual_gid_maps = static:5000
    smtpd_sasl_auth_enable = yes
    broken_sasl_auth_clients = yes
    smtpd_sasl_authenticated_header = yes
    smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, check_recipient_access mysql:/etc/postfix/mysql-virtual_recipient.cf, reject_unauth_destination
    smtpd_tls_security_level = may
    transport_maps = proxy:mysql:/etc/postfix/mysql-virtual_transports.cf
    relay_domains = mysql:/etc/postfix/mysql-virtual_relaydomains.cf
    relay_recipient_maps = mysql:/etc/postfix/mysql-virtual_relayrecipientmaps.cf
    virtual_create_maildirsize = yes
    virtual_maildir_extended = yes
    virtual_mailbox_limit_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailbox_limit_maps.cf
    virtual_mailbox_limit_override = yes
    virtual_maildir_limit_message = "The user you are trying to reach is over quota."
    virtual_overquota_bounce = yes
    proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $virtual_mailbox_limit_maps
    smtpd_sender_restrictions = check_sender_access mysql:/etc/postfix/mysql-virtual_sender.cf
    maildrop_destination_concurrency_limit = 1
    maildrop_destination_recipient_limit = 1
    virtual_transport = maildrop
    header_checks = regexp:/etc/postfix/header_checks
    mime_header_checks = regexp:/etc/postfix/mime_header_checks
    nested_header_checks = regexp:/etc/postfix/nested_header_checks
    body_checks = regexp:/etc/postfix/body_checks
    content_filter = amavis:[127.0.0.1]:10024
    receive_override_options = no_address_mappings
    message_size_limit = 0
    delay_notice_recipient = 
    bounce_notice_recipient = 
    2bounce_notice_recipient = 
    error_notice_recipient = 
    Will be customized with

    Code:
    smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, check_recipient_access mysql:/etc/postfix/mysql-virtual_recipient.cf, reject_unauth_destination, check_policy_service inet:127.0.0.1:60000

    MASTER.CF

    Code:
    #
    # Postfix master process configuration file.  For details on the format
    # of the file, see the master(5) manual page (command: "man 5 master").
    #
    # Do not forget to execute "postfix reload" after editing this file.
    #
    # ==========================================================================
    # service type  private unpriv  chroot  wakeup  maxproc command + args
    #               (yes)   (yes)   (yes)   (never) (100)
    # ==========================================================================
    smtp      inet  n       -       -       -       -       smtpd
    #submission inet n       -       -       -       -       smtpd
    #  -o smtpd_tls_security_level=encrypt
    #  -o smtpd_sasl_auth_enable=yes
    #  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    #  -o milter_macro_daemon_name=ORIGINATING
    smtps     inet  n       -       -       -       -       smtpd
    #  -o smtpd_tls_wrappermode=yes
    #  -o smtpd_sasl_auth_enable=yes
    #  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    #  -o milter_macro_daemon_name=ORIGINATING
    #628      inet  n       -       -       -       -       qmqpd
    pickup    fifo  n       -       -       60      1       pickup
    cleanup   unix  n       -       -       -       0       cleanup
    qmgr      fifo  n       -       n       300     1       qmgr
    #qmgr     fifo  n       -       -       300     1       oqmgr
    tlsmgr    unix  -       -       -       1000?   1       tlsmgr
    rewrite   unix  -       -       -       -       -       trivial-rewrite
    bounce    unix  -       -       -       -       0       bounce
    defer     unix  -       -       -       -       0       bounce
    trace     unix  -       -       -       -       0       bounce
    verify    unix  -       -       -       -       1       verify
    flush     unix  n       -       -       1000?   0       flush
    proxymap  unix  -       -       n       -       -       proxymap
    proxywrite unix -       -       n       -       1       proxymap
    smtp      unix  -       -       -       -       -       smtp
    # When relaying mail as backup MX, disable fallback_relay to avoid MX loops
    relay     unix  -       -       -       -       -       smtp
    	-o smtp_fallback_relay=
    #       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
    showq     unix  n       -       -       -       -       showq
    error     unix  -       -       -       -       -       error
    retry     unix  -       -       -       -       -       error
    discard   unix  -       -       -       -       -       discard
    local     unix  -       n       n       -       -       local
    virtual   unix  -       n       n       -       -       virtual
    lmtp      unix  -       -       -       -       -       lmtp
    anvil     unix  -       -       -       -       1       anvil
    scache    unix  -       -       -       -       1       scache
    #
    # ====================================================================
    # Interfaces to non-Postfix software. Be sure to examine the manual
    # pages of the non-Postfix software to find out what options it wants.
    #
    # Many of the following services use the Postfix pipe(8) delivery
    # agent.  See the pipe(8) man page for information about ${recipient}
    # and other message envelope options.
    # ====================================================================
    #
    # maildrop. See the Postfix MAILDROP_README file for details.
    # Also specify in main.cf: maildrop_destination_recipient_limit=1
    #
    maildrop  unix  -       n       n       -       -       pipe
      flags=DRhu user=vmail argv=/usr/bin/maildrop -d vmail ${extension} ${recipient} ${user} ${nexthop} ${sender}
    #
    # See the Postfix UUCP_README file for configuration details.
    #
    uucp      unix  -       n       n       -       -       pipe
      flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
    #
    # Other external delivery methods.
    #
    ifmail    unix  -       n       n       -       -       pipe
      flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
    bsmtp     unix  -       n       n       -       -       pipe
      flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
    scalemail-backend unix	-	n	n	-	2	pipe
      flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
    mailman   unix  -       n       n       -       -       pipe
      flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
      ${nexthop} ${user}
    
    
    amavis unix - - - - 2 smtp
            -o smtp_data_done_timeout=1200
            -o smtp_send_xforward_command=yes
    
    127.0.0.1:10025 inet n - - - - smtpd
            -o content_filter=
            -o local_recipient_maps=
            -o relay_recipient_maps=
            -o smtpd_restriction_classes=
            -o smtpd_client_restrictions=
            -o smtpd_helo_restrictions=
            -o smtpd_sender_restrictions=
            -o smtpd_recipient_restrictions=permit_mynetworks,reject
            -o mynetworks=127.0.0.0/8
            -o strict_rfc821_envelopes=yes
            -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks
            -o smtpd_bind_address=127.0.0.1
    
    
    # Postfix master process configuration file.  For details on the format
    # of the file, see the master(5) manual page (command: "man 5 master").
    #
    # Do not forget to execute "postfix reload" after editing this file.
    #
    # ==========================================================================
    # service type  private unpriv  chroot  wakeup  maxproc command + args
    #               (yes)   (yes)   (yes)   (never) (100)
    # ==========================================================================
    smtp      inet  n       -       -       -       -       smtpd
    #submission inet n       -       -       -       -       smtpd
    #  -o smtpd_tls_security_level=encrypt
    #  -o smtpd_sasl_auth_enable=yes
    #  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    #  -o milter_macro_daemon_name=ORIGINATING
    smtps     inet  n       -       -       -       -       smtpd
    #  -o smtpd_tls_wrappermode=yes
    #  -o smtpd_sasl_auth_enable=yes
    #  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    #  -o milter_macro_daemon_name=ORIGINATING
    #628      inet  n       -       -       -       -       qmqpd
    pickup    fifo  n       -       -       60      1       pickup
    cleanup   unix  n       -       -       -       0       cleanup
    qmgr      fifo  n       -       n       300     1       qmgr
    #qmgr     fifo  n       -       -       300     1       oqmgr
    tlsmgr    unix  -       -       -       1000?   1       tlsmgr
    rewrite   unix  -       -       -       -       -       trivial-rewrite
    bounce    unix  -       -       -       -       0       bounce
    defer     unix  -       -       -       -       0       bounce
    trace     unix  -       -       -       -       0       bounce
    verify    unix  -       -       -       -       1       verify
    flush     unix  n       -       -       1000?   0       flush
    proxymap  unix  -       -       n       -       -       proxymap
    proxywrite unix -       -       n       -       1       proxymap
    smtp      unix  -       -       -       -       -       smtp
    # When relaying mail as backup MX, disable fallback_relay to avoid MX loops
    relay     unix  -       -       -       -       -       smtp
    	-o smtp_fallback_relay=
    #       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
    showq     unix  n       -       -       -       -       showq
    error     unix  -       -       -       -       -       error
    retry     unix  -       -       -       -       -       error
    discard   unix  -       -       -       -       -       discard
    local     unix  -       n       n       -       -       local
    virtual   unix  -       n       n       -       -       virtual
    lmtp      unix  -       -       -       -       -       lmtp
    anvil     unix  -       -       -       -       1       anvil
    scache    unix  -       -       -       -       1       scache
    #
    # ====================================================================
    # Interfaces to non-Postfix software. Be sure to examine the manual
    # pages of the non-Postfix software to find out what options it wants.
    #
    # Many of the following services use the Postfix pipe(8) delivery
    # agent.  See the pipe(8) man page for information about ${recipient}
    # and other message envelope options.
    # ====================================================================
    #
    # maildrop. See the Postfix MAILDROP_README file for details.
    # Also specify in main.cf: maildrop_destination_recipient_limit=1
    #
    maildrop  unix  -       n       n       -       -       pipe
      flags=DRhu user=vmail argv=/usr/bin/maildrop -d vmail ${extension} ${recipient} ${user} ${nexthop} ${sender}
    #
    # See the Postfix UUCP_README file for configuration details.
    #
    uucp      unix  -       n       n       -       -       pipe
      flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
    #
    # Other external delivery methods.
    #
    ifmail    unix  -       n       n       -       -       pipe
      flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
    bsmtp     unix  -       n       n       -       -       pipe
      flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
    scalemail-backend unix	-	n	n	-	2	pipe
      flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
    mailman   unix  -       n       n       -       -       pipe
      flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
      ${nexthop} ${user}
    
    
    amavis unix - - - - 2 smtp
            -o smtp_data_done_timeout=1200
            -o smtp_send_xforward_command=yes
    
    127.0.0.1:10025 inet n - - - - smtpd
            -o content_filter=
            -o local_recipient_maps=
            -o relay_recipient_maps=
            -o smtpd_restriction_classes=
            -o smtpd_client_restrictions=
            -o smtpd_helo_restrictions=
            -o smtpd_sender_restrictions=
            -o smtpd_recipient_restrictions=permit_mynetworks,reject
            -o mynetworks=127.0.0.0/8
            -o strict_rfc821_envelopes=yes
            -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks
            -o smtpd_bind_address=127.0.0.1
     

Share This Page