SuSe 10

Discussion in 'Installation/Configuration' started by latcarf, Feb 19, 2006.

  1. latcarf

    latcarf New Member

    I just finshed 3 long days of doing a new hard drive setup with Windows/Suse10. Windows was the hardest part because it was refusing to recognize the new unformatted SATA drive but I finally googled the topic to death.

    All is fine so far... I used the Perfect Install here for SuSe9.3 thinking there can not be that much difference. I did have a couple hiccups and hopefully someone can provide some guidance. During...

    Postfix With SMTP-AUTH And TLS I got this;
    Code:
    Reading Package Lists... Done
    Building Dependency Tree... Done
    cyrus-sasl is already the newest version.
    cyrus-sasl-crammd5 is already the newest version.
    cyrus-sasl-digestmd5 is already the newest version.
    cyrus-sasl-plain is already the newest version.
    cyrus-sasl-saslauthd is already the newest version.
    Some packages could not be installed. This may mean that you have
    requested an impossible situation or if you are using the unstable
    distribution that some required packages have not yet been created
    or been moved out of Incoming.
    The following information may help to resolve the situation:
    
    The following packages have unmet dependencies:
      cyrus-sasl-devel: Depends: cyrus-sasl (= 2.1.20) but 2.1.21-3 is to be installed
    E: Broken packages
    Courier-IMAP/Courier-POP3 I got;
    Code:
    Reading Package Lists... Done
    Building Dependency Tree... Done
    fam-server is already the newest version.
    The following packages will be REMOVED:
      imap
    The following NEW packages will be installed:
      courier-imap
    0 upgraded, 1 newly installed, 1 removed and 5 not upgraded.
    Need to get 1412kB of archives.
    After unpacking 649kB of additional disk space will be used.
    Do you want to continue? [Y/n] y
    Get:1 ftp://ftp.gwdg.de SuSE/9.3-i386/base courier-imap 3.0.8-3 [1412kB]
    Fetched 1412kB in 30s (45.6kB/s)
    Checking GPG signatures...
    Committing changes...
    Preparing...                ########################################### [100%]
            file /etc/pam.d/pop3 from install of courier-imap-3.0.8-3 conflicts with file from package qpopper-4.0.5-181
    E: Error while running transaction
    E: Handler silently failed
    and during Apache/PHP5 I got;
    Code:
    Reading Package Lists... Done
    Building Dependency Tree... Done
    apache2 is already the newest version.
    apache2-prefork is already the newest version.
    libapr0 is already the newest version.
    perl-HTML-Parser is already the newest version.
    perl-HTML-Tagset is already the newest version.
    perl-URI is already the newest version.
    perl-libwww-perl is already the newest version.
    Some packages could not be installed. This may mean that you have
    requested an impossible situation or if you are using the unstable
    distribution that some required packages have not yet been created
    or been moved out of Incoming.
    The following information may help to resolve the situation:
    
    The following packages have unmet dependencies:
      apache2-devel: Depends: apache2 (= 2.0.53) but 2.0.54-10.3 is to be installed
      apache2-mod_perl: Depends: perl (= 5.8.6) but 5.8.7-5.3 is to be installed
      perl-Tie-IxHash: Depends: perl (= 5.8.6) but 5.8.7-5.3 is to be installed
    E: Broken packages
    I'm still pretty much a newb w/Linux but it seems some addtional packages need to be installed maybe? Seems like FC4 took care of dependacies, is this a feature I will lose with SuSe?
     
  2. falko

    falko Super Moderator Howtoforge Staff Moderator HowtoForge Supporter ISPConfig Developer

    No, but you used the SuSE 9.3 tutorial for SuSE 10, that's why you have these problems. You'd have the same problems on Fedora if you used the FC3 tutorial for FC4.
    You should have tried this one: http://www.howtoforge.com/perfect_setup_suse_10.0
    It's for SuSE 10.0.
     
  3. latcarf

    latcarf New Member

    aahhh...

    I have been using your main site http://falkotimme.com/howtos/ and didn't see a SuSe10 set up. :eek:

    Can I pick up with this one after the basic install and start over without any issues from using the SuSe9.3?
     
  4. falko

    falko Super Moderator Howtoforge Staff Moderator HowtoForge Supporter ISPConfig Developer

    The newest tutorials are always on HowtoForge. :) I haven't posted new tutorial on falkotimme.com for a few months now because it doesn't make sense to maintain two copies.

    I'd continue with page 4 of the SuSE 10 tutorial: http://www.howtoforge.com/perfect_setup_suse_10.0_p4
     
  5. latcarf

    latcarf New Member

    I went ahead and gave it a shot figuring worst case I would have to reinstall.

    I cannot get any additional Installation Sources to install. I tried yours first then went to the list. I keep getting the same error "InstSrc: E_no_intsrc_on_media" As I write this I am wondering if I shouldn't delete the Disk source then reinstall it after, the word "media" gave me that thought.

    I tried Install Some Software also and could not get openssl-devel-32bit there or in MySQL. I stopped there realizing there is a problem somewhere. I don't know if it makes a difference but the SuSe I have is the Official version which I just bought last week. I assume this is supposed to be a "stable" version. :rolleyes:
     
  6. falko

    falko Super Moderator Howtoforge Staff Moderator HowtoForge Supporter ISPConfig Developer

    Did you use yast to install the packages?
     
  7. latcarf

    latcarf New Member

    Yes, but I finally figured it out. I was not giving the complete address. I am still not sure why the one you referenced would not work but when I clicked the link you gave and followed the path allthe way to the end "/inst-source" they worked.

    I still had problems with this
    Code:
    yast -i findutils readline libgcc glibc-devel findutils-locate gcc flex lynx compat-readline4 db-devel wget openssl-devel-32bit
    Yast could not find openssl-devel-32bit. When I removed -32bit if found and loaded everything.

    So far so good. I still have some stuff to run but I think all should be well now.
     
  8. falko

    falko Super Moderator Howtoforge Staff Moderator HowtoForge Supporter ISPConfig Developer

    I added openssl-devel-32bit to the tutorial last week because it's necessary for 64-bit systems; I didn't test then because I thought this package is available also for 32-bit systems, but it seems that it is not. :( So I have removed the package again from the tutorial.
     
  9. latcarf

    latcarf New Member

    no worry, thanks! :) cool you updated the HowTo also.
     

Share This Page