Still have problem with istallation

Discussion in 'Installation/Configuration' started by Nip, Mar 20, 2007.

  1. Nip

    Nip New Member

    Hi all,

    I have Ubuntu Server, whitch have allready installed apache becasue webserver need it :)

    During ISPconfig installatioan I got this error:
    ________________________________________________________
    ERROR: Could not configure Apache
    cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
    mv: cannot stat `binaries/aps.tar.gz': No such file or directory
    mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
    mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
    mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
    mv: cannot stat `binaries/cronolog': No such file or directory
    mv: cannot stat `binaries/cronosplit': No such file or directory
    mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
    mv: cannot stat `binaries/zip': No such file or directory
    mv: cannot stat `binaries/unzip': No such file or directory
    tar: spamassassin.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `spamassassin': No such file or directory
    tar: uudeview.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `uudeview': No such file or directory
    tar: clamav.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `clamav': No such file or directory
    tar: aps.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    ./setup2: line 860: ispconfig_tmp/php/bin/php: No such file or directory
    ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!


    So ... I am not so strong in this kind of configuration. Would some one help me on this error.

    Best regards from Estonia

    Toomas
     
    Last edited: Mar 23, 2007
  2. till

    till Super Moderator Staff Member ISPConfig Developer

    There is an error in the compile output above the lines you posted. Please post this error here.
     
  3. Nip

    Nip New Member

    Here he comes:
    -----------------------------------------------------------
    cp libcrypto.pc /root/ispconfig/openssl/lib/pkgconfig
    chmod 644 /root/ispconfig/openssl/lib/pkgconfig/libcrypto.pc
    cp libssl.pc /root/ispconfig/openssl/lib/pkgconfig
    chmod 644 /root/ispconfig/openssl/lib/pkgconfig/libssl.pc
    cp openssl.pc /root/ispconfig/openssl/lib/pkgconfig
    chmod 644 /root/ispconfig/openssl/lib/pkgconfig/openssl.pc
    sed: -e expression #1, char 19: Invalid range end
    sed: -e expression #1, char 19: Invalid range end
    sed: -e expression #1, char 19: Invalid range end
    sed: -e expression #1, char 19: Invalid range end
    ./configure:Error: Bad argument line: missing --with-apache=DIR
    ./configure:Usage: ./configure [mod_ssl options] [APACI options]
    mod_ssl feedback options:
    --help ...this message [OPTIONAL]
    --quiet ...configure totally quiet [OPTIONAL]
    --verbose ...configure with verbosity [OPTIONAL]
    --force ...configure with disabled checks [OPTIONAL]
    --expert ...configure without user hints [OPTIONAL]
    mod_ssl configure options:
    --with-apache=DIR ...path to Apache 1.3.x source tree [REQUIRED]
    --with-apxs[=FILE] ...path to APXS program [OPTIONAL]
    --with-ssl=DIR ...path to OpenSSL source tree [OPTIONAL]
    --with-mm=DIR ...path to MM source tree [OPTIONAL]
    --with-crt=FILE ...path to SSL X.509 certificate file [OPTIONAL]
    --with-key=FILE ...path to SSL RSA private key file [OPTIONAL]
    --with-patch=FILE ...path to your vendor 'patch' program [OPTIONAL]
    --with-eapi-only ...apply EAPI to Apache source only [OPTIONAL]
    APACI configure options: [OPTIONAL]
    --prefix=DIR ...installation prefix for Apache
    --... ...see INSTALL file of Apache for more options!
    ERROR: Could not configure Apache
    cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
    mv: cannot stat `binaries/aps.tar.gz': No such file or directory
    mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
    mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
    mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
    mv: cannot stat `binaries/cronolog': No such file or directory
    mv: cannot stat `binaries/cronosplit': No such file or directory
    mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
    mv: cannot stat `binaries/zip': No such file or directory
    mv: cannot stat `binaries/unzip': No such file or directory
    tar: spamassassin.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `spamassassin': No such file or directory
    tar: uudeview.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `uudeview': No such file or directory
    tar: clamav.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `clamav': No such file or directory
    tar: aps.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    ./setup2: line 860: ispconfig_tmp/php/bin/php: No such file or directory
    ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!
     
    Last edited: Mar 22, 2007
  4. coms418

    coms418 New Member

    I am having the same problem, right down to the letter.:confused:

    Cheers Paul
     
  5. moos3

    moos3 New Member

    same here!
     
  6. falko

    falko Super Moderator ISPConfig Developer

    Please do this:
    Code:
    rm -f /bin/sh
    ln -s /bin/bash /bin/sh
    and try again.
     
  7. coms418

    coms418 New Member

    yerp i did as you stated, firstup it looked like it was going to work.
    this time it asked me for all the RSA info.

    I am unsure why the install goes pear shaped and crashing out on the same line.


    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    ./setup2: line 860: ispconfig_tmp/php/bin/php: No such file or directory
    ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!
    [email protected]:/home/paul/install_ispconfig#


    if you think you need access to this ask and i could open a port up and a user name

    P.S. allmost ready to start again from scratch, like back to the start.

    cheers Paul
     
  8. Nip

    Nip New Member

    Is that error line important:
    I found that on the beginning when installation cheking severals conficurations whitch including http.conf as well.

    I saw that line:
    httpd: Could not determine the server's fully qualified domain name, using 127.0.0.1 for ServerName

    on the syntax was OK!
     
    Last edited: Mar 23, 2007
  9. coms418

    coms418 New Member

    yer i am using a dyndns domian name work well for me.
    As my ISP wants to much money for one IP.

    today at work i though about this a little more, the error that is

    my thoughts are there is some thing wrong with the way that the file is untaring.

    as this is a error that i see on my own ubuntu server in smp mode

    mv: cannot stat `binaries/aps.tar.gz': No such file or directory
    mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
    mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
    mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
    mv: cannot stat `binaries/cronolog': No such file or directory
    mv: cannot stat `binaries/cronosplit': No such file or directory
    mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
    mv: cannot stat `binaries/zip': No such file or directory
    mv: cannot stat `binaries/unzip': No such file or directory

    to me it looks like that the untaring is losing or can not place a tared file from within a tared file, this is what it looks like to me.

    Funny thing is it only seems to effect debian users, dont know why.
    I am trying out debian, well ubuntu server and I do like it (previous user and lover of gentoo)

    I am going to play with installing the files that are missing into the directory and see if this answers the question as the files are missing before the install.

    I also tried install them manually but the script is wanting to install them, (i was just goingto rem them out the ine to force the install, but now i want to know why it is not working).

    this is my idea why and I am not sure if its going to work but I will try it

    cheers Paul
     
  10. till

    till Super Moderator Staff Member ISPConfig Developer

    I dont think that this assumption is correct, I use debian and install ISPconfig nearly every day on it without problems.

    Please post the output of:

    df -h

    How do you execute the setup script?

    1) Do not use sudo, you must be logged in as root user.
    2) you must enter the install_ispconfig directory nd then execute the setup script with: ./setup
    3) you must unpack the installer tar.gz file every time you try to install again, the tar.gz files inside where moved to another location. You can not run the setup script twice!
     
  11. electroISP

    electroISP New Member

    same troubles with suse10.2 64

    hey till, had ispconfig working lovely for months got too ambitious and need a complete reinstall have tried about five times to install ispconfig same troubles

    ./setup2: line 860: ispconfig_tmp/php/bin/php: No such file or directory
    ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!

    heres the df-h


    electrohostone:/tmp/install_ispconfig # df -h
    Filesystem Size Used Avail Use% Mounted on
    /dev/hdd3 20G 4.5G 15G 24% /
    udev 467M 112K 467M 1% /dev
    /dev/hdd4 188G 190M 178G 1% /home
    /dev/hda 3.7G 3.7G 0 100% /media/SU1020.001
    electrohostone:/tmp/install_ispconfig #

    if your any hints when you have time


    -------------------------------------------------------------------------------------
    sorry for my laziness, looked at other posts and added zlib packages inc 32bit and ssldev packages incl 32bit and install worked fine, recommend to others trying this first, on suse yast2, then software management search for ssl dev highlight three packages and then seach zlib and highlight two packages and install then quit, tar the ispconfig cd and ./setup all good

    night
     
    Last edited: Mar 23, 2007
  12. till

    till Super Moderator Staff Member ISPConfig Developer

    There must be a error in the compile output above the error you posted. Please post this error here.

    As you use Suse 64Bit: Please make sure that you installed the 32Bit openssl-dev pacakge and not just the 64Bit package.
     
  13. electroISP

    electroISP New Member

    install fine but no access

    i can log in with putty i can ping it i can dig it but i cant get any access to ispconfig admin, nor webpages for that matter (no shared ip message) ive used domain name, local ip and static ip, checked dmz on router firewall.

    heres some info and things ive tried

    Code:
    electrohostone:~/ispconfig/httpd/conf # /etc/init.d/boot.apparmor stop
    Unloading AppArmor profiles - failed, is securityfs loaded?           failed
    
    electrohostone:~/ispconfig/httpd/conf # chkconfig -d boot.apparmor
    boot.apparmor             0:off  1:off  2:off  3:off  4:off  5:off  6:off
    
    
    
    electrohostone:~/ispconfig/httpd/conf # iptables -L
    Chain INPUT (policy DROP)
    target     prot opt source               destination
    ACCEPT     0    --  anywhere             anywhere
    ACCEPT     0    --  anywhere             anywhere            state RELATED,ESTABLISHED
    input_ext  0    --  anywhere             anywhere
    input_ext  0    --  anywhere             anywhere
    LOG        0    --  anywhere             anywhere            limit: avg 3/min burst 5 LOG level warning tcp-options ip-options prefix `SFW2-IN-ILL-TARGET '
    DROP       0    --  anywhere             anywhere
    
    Chain FORWARD (policy DROP)
    target     prot opt source               destination
    ACCEPT     0    --  anywhere             anywhere
    LOG        0    --  anywhere             anywhere            limit: avg 3/min burst 5 LOG level warning tcp-options ip-options prefix `SFW2-FWD-ILL-ROUTING '
    
    Chain OUTPUT (policy ACCEPT)
    target     prot opt source               destination
    ACCEPT     0    --  anywhere             anywhere
    ACCEPT     0    --  anywhere             anywhere            state NEW,RELATED,ESTABLISHED
    LOG        0    --  anywhere             anywhere            limit: avg 3/min burst 5 LOG level warning tcp-options ip-options prefix `SFW2-OUT-ERROR '
    
    Chain forward_ext (0 references)
    target     prot opt source               destination
    
    Chain input_ext (2 references)
    target     prot opt source               destination
    DROP       0    --  anywhere             anywhere            PKTTYPE = broadcast
    ACCEPT     icmp --  anywhere             anywhere            icmp source-quench
    ACCEPT     icmp --  anywhere             anywhere            icmp echo-request
    ACCEPT     icmp --  anywhere             anywhere            state RELATED,ESTABLISHED icmp echo-reply
    ACCEPT     icmp --  anywhere             anywhere            state RELATED,ESTABLISHED icmp destination-unreachable
    ACCEPT     icmp --  anywhere             anywhere            state RELATED,ESTABLISHED icmp time-exceeded
    ACCEPT     icmp --  anywhere             anywhere            state RELATED,ESTABLISHED icmp parameter-problem
    ACCEPT     icmp --  anywhere             anywhere            state RELATED,ESTABLISHED icmp timestamp-reply
    ACCEPT     icmp --  anywhere             anywhere            state RELATED,ESTABLISHED icmp address-mask-reply
    ACCEPT     icmp --  anywhere             anywhere            state RELATED,ESTABLISHED icmp protocol-unreachable
    ACCEPT     icmp --  anywhere             anywhere            state RELATED,ESTABLISHED icmp redirect
    LOG        tcp  --  anywhere             anywhere            limit: avg 3/min burst 5 tcp dpt:5801 flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC-TCP '
    ACCEPT     tcp  --  anywhere             anywhere            tcp dpt:5801
    LOG        tcp  --  anywhere             anywhere            limit: avg 3/min burst 5 tcp dpt:5901 flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC-TCP '
    ACCEPT     tcp  --  anywhere             anywhere            tcp dpt:5901
    LOG        tcp  --  anywhere             anywhere            limit: avg 3/min burst 5 tcp dpt:ssh flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC-TCP '
    ACCEPT     tcp  --  anywhere             anywhere            tcp dpt:ssh
    reject_func  tcp  --  anywhere             anywhere            tcp dpt:ident state NEW
    LOG        0    --  anywhere             anywhere            limit: avg 3/min burst 5 PKTTYPE = multicast LOG level warning tcp-options ip-options prefix `SFW2-INext-DROP-DEFLT '
    DROP       0    --  anywhere             anywhere            PKTTYPE = multicast
    LOG        tcp  --  anywhere             anywhere            limit: avg 3/min burst 5 tcp flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-DROP-DEFLT '
    LOG        icmp --  anywhere             anywhere            limit: avg 3/min burst 5 LOG level warning tcp-options ip-options prefix `SFW2-INext-DROP-DEFLT '
    LOG        udp  --  anywhere             anywhere            limit: avg 3/min burst 5 LOG level warning tcp-options ip-options prefix `SFW2-INext-DROP-DEFLT '
    LOG        0    --  anywhere             anywhere            limit: avg 3/min burst 5 state INVALID LOG level warning tcp-options ip-options prefix `SFW2-INext-DROP-DEFLT-INV '
    DROP       0    --  anywhere             anywhere
    
    Chain reject_func (1 references)
    target     prot opt source               destination
    REJECT     tcp  --  anywhere             anywhere            reject-with tcp-reset
    REJECT     udp  --  anywhere             anywhere            reject-with icmp-port-unreachable
    REJECT     0    --  anywhere             anywhere            reject-with icmp-proto-unreachable
    
    electrohostone:~/ispconfig/httpd/conf # ifconfig
    eth0      Link encap:Ethernet  HWaddr 00:50:8D:67:66:1F
              inet addr:192.168.1.25  Bcast:192.168.1.255  Mask:255.255.255.0
              inet6 addr: fe80::250:8dff:fe67:661f/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:3041 errors:0 dropped:0 overruns:0 frame:0
              TX packets:2118 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:285624 (278.9 Kb)  TX bytes:313693 (306.3 Kb)
              Interrupt:177 Base address:0xb000
    
    lo        Link encap:Local Loopback
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:165 errors:0 dropped:0 overruns:0 frame:0
              TX packets:165 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:16606 (16.2 Kb)  TX bytes:16606 (16.2 Kb)
    
    
    electrohostone:~/ispconfig/httpd/conf # /etc/init.d/ispconfig_server restart
    Shutting down ISPConfig system...
    /root/ispconfig/httpd/bin/apachectl stop: httpd stopped
    ISPConfig system stopped!
    Starting ISPConfig system...
    /root/ispconfig/httpd/bin/apachectl startssl: httpd started
    ISPConfig system is now up and running!
    electrohostone:~/ispconfig/httpd/conf #
    
    
    feeling foolish but frustrated please put me out of my misery with easy solution

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
    found that you need to manually add https server in yast, all sweet in the world again, this suse distro is not as nice as the last

    adios (im sure well meet again)
     
    Last edited: Mar 23, 2007
  14. falko

    falko Super Moderator ISPConfig Developer

    That's just a warning. You can ignore it.
     
  15. coms418

    coms418 New Member

    Hello Till,

    [email protected]:/home/paul# df -h
    Filesystem Size Used Avail Use% Mounted on
    /dev/sda1 32G 1.4G 30G 5% /
    varrun 506M 104K 506M 1% /var/run
    varlock 506M 0 506M 0% /var/lock
    procbususb 10M 92K 10M 1% /proc/bus/usb
    udev 10M 92K 10M 1% /dev
    devshm 506M 0 506M 0% /dev/shm

    I was not picking on debain, just that most of the problem to me lookied like that. I do like the way that it works in the OS way and the packages are well mantained.

    now for your other questions

    was logged in as root.

    yes everytime i un tar the file tar xvfz ISPConfig-2.2.11.tar.gz
    cd install directory
    in there ./setup

    I am following the instructions on the web as the prefect install


    and the error is the same, sorry.

    to me it looks like these files are missing
    `binaries/aps.tar.gz': No such file or directory
    `binaries/spamassassin.tar.gz': No such file or directory
    `binaries/uudeview.tar.gz': No such file or directory
    `binaries/clamav.tar.gz': No such file or directory
    `binaries/cronolog': No such file or directory
    `binaries/cronosplit': No such file or directory
    `binaries/ispconfig_tcpserver': No such file or directory
    `binaries/zip': No such file or directory
    `binaries/unzip': No such file or directory
    tar: spamassassin.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now

    I think this is the reason for the install not installing, I might be wrong as I am not an expert with linux, I just like it a hell of a lot.
    I have other things running in the background like asterisk server (voip) and zoneminder (dvr camera thing) I dont see that being a problem, but could be if you say start the perfect server install i will as i dont really care as the server is not online for users to use at the moment


    P.S. please dont take any of what I say or do as, I try not to be offenisive.

    cheers Paul
     
  16. falko

    falko Super Moderator ISPConfig Developer

    From what directory do you try to install ISPConfig? You can install from each directory except /root/ispconfig and /home/admispconfig (e.g. /tmp would be fine).

    There must be an error before the ones you posted. Please post the full error output.
     
  17. Nip

    Nip New Member

    Ahhoi (in Estonian its mean Hello) :) just for intro ...

    But ... I did all things what any person advised to do ... no resault at all.

    I still have problem with istallation ...
    ------------------------------------------------------------
    installing libcrypto.a
    installing libssl.a
    cp libcrypto.pc /root/ispconfig/openssl/lib/pkgconfig
    chmod 644 /root/ispconfig/openssl/lib/pkgconfig/libcrypto.pc
    cp libssl.pc /root/ispconfig/openssl/lib/pkgconfig
    chmod 644 /root/ispconfig/openssl/lib/pkgconfig/libssl.pc
    cp openssl.pc /root/ispconfig/openssl/lib/pkgconfig
    chmod 644 /root/ispconfig/openssl/lib/pkgconfig/openssl.pc
    sed: -e expression #1, char 19: Invalid range end
    sed: -e expression #1, char 19: Invalid range end
    sed: -e expression #1, char 19: Invalid range end
    sed: -e expression #1, char 19: Invalid range end
    ./configure:Error: Bad argument line: missing --with-apache=DIR
    ./configure:Usage: ./configure [mod_ssl options] [APACI options]
    mod_ssl feedback options:
    --help ...this message [OPTIONAL]
    --quiet ...configure totally quiet [OPTIONAL]
    --verbose ...configure with verbosity [OPTIONAL]
    --force ...configure with disabled checks [OPTIONAL]
    --expert ...configure without user hints [OPTIONAL]
    mod_ssl configure options:
    --with-apache=DIR ...path to Apache 1.3.x source tree [REQUIRED]
    --with-apxs[=FILE] ...path to APXS program [OPTIONAL]
    --with-ssl=DIR ...path to OpenSSL source tree [OPTIONAL]
    --with-mm=DIR ...path to MM source tree [OPTIONAL]
    --with-crt=FILE ...path to SSL X.509 certificate file [OPTIONAL]
    --with-key=FILE ...path to SSL RSA private key file [OPTIONAL]
    --with-patch=FILE ...path to your vendor 'patch' program [OPTIONAL]
    --with-eapi-only ...apply EAPI to Apache source only [OPTIONAL]
    APACI configure options: [OPTIONAL]
    --prefix=DIR ...installation prefix for Apache
    --... ...see INSTALL file of Apache for more options!
    ERROR: Could not configure Apache
    cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
    mv: cannot stat `binaries/aps.tar.gz': No such file or directory
    mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
    mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
    mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
    mv: cannot stat `binaries/cronolog': No such file or directory
    mv: cannot stat `binaries/cronosplit': No such file or directory
    mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
    mv: cannot stat `binaries/zip': No such file or directory
    mv: cannot stat `binaries/unzip': No such file or directory
    tar: spamassassin.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `spamassassin': No such file or directory
    tar: uudeview.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `uudeview': No such file or directory
    tar: clamav.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `clamav': No such file or directory
    tar: aps.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    ./setup2: line 860: ispconfig_tmp/php/bin/php: No such file or directory
    ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!
    [email protected] :~/install_ispconfig#
    --------------------------------------------------------------

    [email protected] :~# df -h
    Filesystem Size Used Avail Use% Mounted on
    /dev/hda1 36G 3,3G 31G 10% /
    varrun 189M 112K 189M 1% /var/run
    varlock 189M 4,0K 189M 1% /var/lock
    udev 189M 44K 189M 1% /dev
    devshm 189M 0 189M 0% /dev/shm
    [email protected] :~#
    -------------------------------------------------

    I am ready to give up ...
     
  18. falko

    falko Super Moderator ISPConfig Developer

    Did you modify the installer?
    If you use Ubuntu, please run
    Code:
    rm -f /bin/sh
    ln -s /bin/bash /bin/sh
    before you run the installer.

    From what directory do you try to install ISPConfig?
     

Share This Page