Soft Raid0

Discussion in 'Technical' started by husskii, Mar 26, 2010.

  1. husskii

    husskii New Member

    Hi I just purchased a new server which came with 2x 750GB sata HDD's, It also have debian lenny installed and I would like to setup soft raid0 so they I can get the following partition layout..

    Partition layout:
    RAID 0 - / - 20 gig
    RAID 0 - /home - the rest

    can someone please show me how, Ive done some google searches and also looking in help guides, and I found a guide for mdadm, but having not done this before, I am getting lost..:eek:

    my current config in webmin is
    Code:
    /dev/md1 	Yes 	Mirrored (RAID1) 	5 GB 	/dev/sda1 | /dev/sdb1
    /dev/md2 	Yes 	Mirrored (RAID1) 	693.13 GB 	/dev/sda2 | /dev/sdb2
    or if I run the
    Code:
    dh -f
    command in putty, I get this

    Code:
    Filesystem            Size  Used Avail Use% Mounted on
    /dev/md1              5.0G  669M  4.1G  14% /
    tmpfs                 3.9G     0  3.9G   0% /lib/init/rw
    udev                   10M  2.7M  7.4M  27% /dev
    tmpfs                 3.9G     0  3.9G   0% /dev/shm
    /dev/md2              688G  198M  653G   1% /home
    Could really use the help...:confused:

    Thanks
    Husskii
     
    Last edited: Mar 26, 2010

Share This Page