SMTP Offline after new install

Discussion in 'Installation/Configuration' started by modsbyus, Aug 26, 2021.

  1. modsbyus

    modsbyus New Member

    ISPConfig 3
    Debian 10
    Just finished installing ISPConfig 3 on Debian 10 for the purpose of a mail server following The Perfect Server - Debian 10 (Buster) with Apache, BIND, Dovecot, PureFTPD and ISPConfig 3.2 (howtoforge.com)
    From mail.log:
    Code:
    postfix/postqueue[3470]: warning: Mail system is down -- accessing queue directly
    From Script:
    Code:
    ##### SERVER #####
    IP-address (as per hostname): ***.***.***.***
    [WARN] could not determine server's ip address by ifconfig
    [INFO] OS version is Debian GNU/Linux 10 (buster)
    
    [INFO] uptime:  14:49:34 up 37 min,  1 user,  load average: 0.00, 0.02, 0.05
    
    [INFO] memory:
                  total        used        free      shared  buff/cache   available
    Mem:          3.9Gi       1.7Gi       1.6Gi        21Mi       619Mi       1.9Gi
    Swap:         974Mi          0B       974Mi
    
    [INFO] systemd failed services status:
      UNIT              LOAD   ACTIVE SUB    DESCRIPTION
    ● [email protected] loaded failed failed Postfix Mail Transport Agent (instance -)
    
    LOAD   = Reflects whether the unit definition was properly loaded.
    ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
    SUB    = The low-level unit activation state, values depend on unit type.
    
    1 loaded units listed. Pass --all to see loaded but inactive units, too.
    To show all installed unit files use 'systemctl list-unit-files'.
    
    [INFO] ISPConfig is installed.
    
    ##### ISPCONFIG #####
    ISPConfig version is 3.2.5
    
    
    ##### VERSION CHECK #####
    
    [INFO] php (cli) version is 7.3.29-1~deb10u1
    [INFO] php-cgi (used for cgi php in default vhost!) is version 7.3.29
    
    ##### PORT CHECK #####
    
    [WARN] Port 25 (SMTP server) seems NOT to be listening
    [WARN] Port 465 (SMTP server SSL) seems NOT to be listening
    [WARN] Port 25 (SMTP server) seems NOT to be listening
    
    ##### MAIL SERVER CHECK #####
    
    [WARN] I found no "submission" entry in your postfix master.cf
    [INFO] this is not critical, but if you want to offer port 587 for smtp connections you have to enable this.
    [WARN] I found no "smtps" entry in your postfix master.cf
    [INFO] this is not critical, but if you want to offer SSL for smtp (not TLS) connections you have to enable this.
    
    ##### RUNNING SERVER PROCESSES #####
    
    [INFO] I found the following web server(s):
            Apache 2 (PID 2684)
    [WARN] I could not determine which mail server is running.
    [INFO] I found the following pop3 server(s):
            Dovecot (PID 2627)
    [INFO] I found the following imap server(s):
            Dovecot (PID 2627)
    [INFO] I found the following ftp server(s):
            PureFTP (PID 2757)
    
    ##### LISTENING PORTS #####
    (only           ()
    Local           (Address)
    [anywhere]:110          (2627/dovecot)
    [anywhere]:143          (2627/dovecot)
    [anywhere]:21           (2757/pure-ftpd)
    [anywhere]:22           (478/sshd)
    [anywhere]:993          (2627/dovecot)
    [anywhere]:995          (2627/dovecot)
    [localhost]:10023               (372/postgrey)
    [localhost]:10024               (2614/amavisd-new)
    [localhost]:10026               (2614/amavisd-new)
    [localhost]:3306                (2498/mysqld)
    [localhost]:11211               (378/memcached)
    [localhost]10           (2627/dovecot)
    [localhost]43           (2627/dovecot)
    *:*:*:*::*:8080         (2684/apache2)
    *:*:*:*::*:80           (2684/apache2)
    *:*:*:*::*:8081         (2684/apache2)
    *:*:*:*::*:21           (2757/pure-ftpd)
    *:*:*:*::*:22           (478/sshd)
    *:*:*:*::*:443          (2684/apache2)
    *:*:*:*::*:993          (2627/dovecot)
    *:*:*:*::*:995          (2627/dovecot)
    *:*:*:*::*:10023                (372/postgrey)
    *:*:*:*::*:10024                (2614/amavisd-new)
    *:*:*:*::*:10026                (2614/amavisd-new)
    
    
    
    
    ##### IPTABLES #####
    Chain INPUT (policy ACCEPT)
    target     prot opt source               destination
    
    Chain FORWARD (policy ACCEPT)
    target     prot opt source               destination
    
    Chain OUTPUT (policy ACCEPT)
    target     prot opt source               destination
    
    
    
    
    ##### LET'S ENCRYPT #####
    acme.sh is installed in /root/.acme.sh/acme.sh
    cat /etc/postfix/master.cf

    Code:
    #
    # Postfix master process configuration file.  For details on the format
    # of the file, see the master(5) manual page (command: "man 5 master" or
    # on-line: http://www.postfix.org/master.5.html).
    #
    # Do not forget to execute "postfix reload" after editing this file.
    #
    # ==========================================================================
    # service type  private unpriv  chroot  wakeup  maxproc command + args
    #               (yes)   (yes)   (no)    (never) (100)
    # ==========================================================================
    smtp      inet  n       -       y       -       -       smtpd
    #smtp      inet  n       -       y       -       1       postscreen
    #smtpd     pass  -       -       y       -       -       smtpd
    #dnsblog   unix  -       -       y       -       0       dnsblog
    #tlsproxy  unix  -       -       y       -       0       tlsproxy
    #submission inet n       -       y       -       -       smtpd
    #  -o syslog_name=postfix/submission
    #  -o smtpd_tls_security_level=encrypt
    #  -o smtpd_sasl_auth_enable=yes
    #  -o smtpd_tls_auth_only=yes
    #  -o smtpd_reject_unlisted_recipient=no
    #  -o smtpd_client_restrictions=$mua_client_restrictions
    #  -o smtpd_helo_restrictions=$mua_helo_restrictions
    #  -o smtpd_sender_restrictions=$mua_sender_restrictions
    #  -o smtpd_recipient_restrictions=
    #  -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
    #  -o milter_macro_daemon_name=ORIGINATING
    #smtps     inet  n       -       y       -       -       smtpd
    #  -o syslog_name=postfix/smtps
    #  -o smtpd_tls_wrappermode=yes
    #  -o smtpd_sasl_auth_enable=yes
    #  -o smtpd_reject_unlisted_recipient=no
    #  -o smtpd_client_restrictions=$mua_client_restrictions
    #  -o smtpd_helo_restrictions=$mua_helo_restrictions
    #  -o smtpd_sender_restrictions=$mua_sender_restrictions
    #  -o smtpd_recipient_restrictions=
    #  -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
    #  -o milter_macro_daemon_name=ORIGINATING
    #628       inet  n       -       y       -       -       qmqpd
    pickup    unix  n       -       y       60      1       pickup
    cleanup   unix  n       -       y       -       0       cleanup
    qmgr      unix  n       -       n       300     1       qmgr
    #qmgr     unix  n       -       n       300     1       oqmgr
    tlsmgr    unix  -       -       y       1000?   1       tlsmgr
    rewrite   unix  -       -       y       -       -       trivial-rewrite
    bounce    unix  -       -       y       -       0       bounce
    defer     unix  -       -       y       -       0       bounce
    trace     unix  -       -       y       -       0       bounce
    verify    unix  -       -       y       -       1       verify
    flush     unix  n       -       y       1000?   0       flush
    proxymap  unix  -       -       n       -       -       proxymap
    proxywrite unix -       -       n       -       1       proxymap
    smtp      unix  -       -       y       -       -       smtp
    relay     unix  -       -       y       -       -       smtp
            -o syslog_name=postfix/$service_name
    #       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
    showq     unix  n       -       y       -       -       showq
    error     unix  -       -       y       -       -       error
    retry     unix  -       -       y       -       -       error
    discard   unix  -       -       y       -       -       discard
    local     unix  -       n       n       -       -       local
    virtual   unix  -       n       n       -       -       virtual
    lmtp      unix  -       -       y       -       -       lmtp
    anvil     unix  -       -       y       -       1       anvil
    scache    unix  -       -       y       -       1       scache
    postlog   unix-dgram n  -       n       -       1       postlogd
    #
    # ====================================================================
    # Interfaces to non-Postfix software. Be sure to examine the manual
    # pages of the non-Postfix software to find out what options it wants.
    #
    # Many of the following services use the Postfix pipe(8) delivery
    # agent.  See the pipe(8) man page for information about ${recipient}
    # and other message envelope options.
    # ====================================================================
    #
    # maildrop. See the Postfix MAILDROP_README file for details.
    # Also specify in main.cf: maildrop_destination_recipient_limit=1
    #
    maildrop  unix  -       n       n       -       -       pipe
      flags=DRhu user=vmail argv=/usr/bin/maildrop -d vmail ${extension} ${recipient} ${user} ${nexthop} ${sender}
    #
    # ====================================================================
    #
    # Recent Cyrus versions can use the existing "lmtp" master.cf entry.
    #
    # Specify in cyrus.conf:
    #   lmtp    cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
    #
    # Specify in main.cf one or more of the following:
    #  mailbox_transport = lmtp:inet:localhost
    #  virtual_transport = lmtp:inet:localhost
    #
    # ====================================================================
    #
    # Cyrus 2.1.5 (Amos Gouaux)
    # Also specify in main.cf: cyrus_destination_recipient_limit=1
    #
    #cyrus     unix  -       n       n       -       -       pipe
    #  user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
    #
    # ====================================================================
    # Old example of delivery via Cyrus.
    #
    #old-cyrus unix  -       n       n       -       -       pipe
    #  flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
    #
    # ====================================================================
    #
    # See the Postfix UUCP_README file for configuration details.
    #
    uucp      unix  -       n       n       -       -       pipe
      flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
    #
    # Other external delivery methods.
    #
    ifmail    unix  -       n       n       -       -       pipe
      flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
    bsmtp     unix  -       n       n       -       -       pipe
      flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
    scalemail-backend unix  -       n       n       -       2       pipe
      flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
    mailman   unix  -       n       n       -       -       pipe
      flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
      ${nexthop} ${user}
    
    mysql soft nofile 65535
    mysql hard nofile 65535
    dovecot   unix  -       n       n       -       -       pipe
      flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${user}@${nexthop}
    
    
    amavis unix - - - - 2 smtp
            -o smtp_data_done_timeout=1200
            -o smtp_send_xforward_command=yes
                    -o smtp_bind_address=
    
    
    127.0.0.1:10025 inet n - n - - smtpd
            -o content_filter=
            -o local_recipient_maps=
            -o relay_recipient_maps=
            -o smtpd_restriction_classes=
            -o smtpd_client_restrictions=
            -o smtpd_helo_restrictions=
            -o smtpd_sender_restrictions=
            -o smtpd_recipient_restrictions=permit_mynetworks,reject
            -o smtpd_end_of_data_restrictions=
            -o mynetworks=127.0.0.0/8
            -o strict_rfc821_envelopes=yes
            -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks
            -o smtp_send_xforward_command=yes
            -o disable_dns_lookups=yes
    
    
    127.0.0.1:10027 inet n - n - - smtpd
            -o content_filter=
            -o local_recipient_maps=
            -o relay_recipient_maps=
            -o smtpd_restriction_classes=
            -o smtpd_client_restrictions=
            -o smtpd_helo_restrictions=
            -o smtpd_sender_restrictions=
            -o smtpd_recipient_restrictions=permit_mynetworks,reject
            -o smtpd_end_of_data_restrictions=
            -o mynetworks=127.0.0.0/8
            -o strict_rfc821_envelopes=yes
            -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks
            -o smtp_send_xforward_command=yes
            -o milter_default_action=accept
            -o milter_macro_daemon_name=ORIGINATING
            -o disable_dns_lookups=yes
    
    postconf -n
     
    Last edited: Aug 26, 2021
  2. Jesse Norell

    Jesse Norell ISPConfig Developer Staff Member ISPConfig Developer

    You have garbage in your master.cf file:
    Code:
    mysql soft nofile 65535
    mysql hard nofile 65535
    Also you have not changed it according to the tutorial to enable smpts and submission.
     
    ahrasis likes this.
  3. till

    till Super Moderator Staff Member ISPConfig Developer

    And you left out the step from the guide where it instructs you to edit master.cf file and remove the # in front of the parts for submission and smtps.
     

Share This Page