Slow connection to FC6 system post-LAMP install?

Discussion in 'Installation/Configuration' started by cfspence, Jan 23, 2008.

  1. cfspence

    cfspence New Member

    Greetings,

    First, I'm an utter novice. :confused:

    I have a FC6 system running on a HP dc7700p PC (4 GB RAM, 2 250GB HDD's, Intel Core 2 Duo [Intel Q965 Express Chipset], at 2.13 GHz, Gigabit ethernet, ATI Radeon X1600XT video card). After installation of the LAMP server according to the How-to (omitting the ISPConfig, BIND database, and mail server), I noticed a big slow-down in my remote connection (but from within the LAN) to the system via a SSH client. Also the Apache web server was VERY slow to serve pages from this system to my office PC (within the LAN).

    Any suggestions as to how I can go about diagnosing and resolving this problem?

    AdvTHANKSance,

    --Clay
     
  2. falko

    falko Super Moderator ISPConfig Developer

    Take a look at the logs in the /var/Log directory.
     
  3. lyndros

    lyndros New Member

    cat u show us the dump of "dmesg"

    thks
     
  4. cfspence

    cfspence New Member

    dmesg dump

    Yes. Here is the dmesg dump. I seem to now have broken httpd as it will not start - I will attempt to reconfig. Still the connection time with SSH is very slow. It does appear from the /var/log/secure log that SSH does a reverse DNS lookup. I understand this can slow things down. The Apache server may be doing the same thing. In either case I am unsure how to turn reverse lookup off.

    Here is the dump:
    ==============================
    Linux version 2.6.22.9-61.fc6 (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-13)) #1 SMP Thu Sep 27 18:48:03 EDT 2007
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000dffb1d00 (usable)
    BIOS-e820: 00000000dffb1d00 - 00000000e0000000 (reserved)
    BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved)
    BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 000000011c000000 (usable)
    Warning only 4GB will be used.
    Use a PAE enabled kernel.
    3200MB HIGHMEM available.
    896MB LOWMEM available.
    found SMP MP-table at 000f9bf0
    Using x86 segment limits to approximate NX protection
    Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 229376
    HighMem 229376 -> 1048576
    early_node_map[1] active PFN ranges
    0: 0 -> 1048576
    On node 0 totalpages: 1048576
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 1760 pages used for memmap
    Normal zone: 223520 pages, LIFO batch:31
    HighMem zone: 6400 pages used for memmap
    HighMem zone: 812800 pages, LIFO batch:31
    DMI 2.4 present.
    Using APIC driver default
    ACPI: RSDP 000E7610, 0014 (r0 COMPAQ)
    ACPI: RSDT DFFC3D40, 0040 (r1 HPQOEM SLIC-BPC 20070206 0)
    ACPI: FACP DFFC3DE8, 0074 (r1 COMPAQ BROADH2O 1 0)
    ACPI: DSDT DFFC4143, 9A2A (r1 COMPAQ DSDT_PRJ 1 MSFT 100000E)
    ACPI: FACS DFFC3D00, 0040
    ACPI: APIC DFFC3E5C, 0068 (r1 COMPAQ BROADH2O 1 0)
    ACPI: ASF! DFFC3EC4, 0063 (r32 COMPAQ BROADH2O 1 0)
    ACPI: MCFG DFFC3F27, 003C (r1 COMPAQ BROADH2O 1 0)
    ACPI: TCPA DFFC3F63, 0032 (r1 COMPAQ BROADH2O 1 0)
    ACPI: SLIC DFFC3F95, 0176 (r1 HPQOEM SLIC-BPC 1 0)
    ACPI: HPET DFFC410B, 0038 (r1 COMPAQ BROADH2O 1 0)
    ACPI: PM-Timer IO Port: 0xf808
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Processor #0 6:15 APIC version 20
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Processor #1 6:15 APIC version 20
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at e2000000 (gap: e0000000:14000000)
    Built 1 zonelists. Total pages: 1040384
    Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
    mapped APIC to ffffd000 (fee00000)
    mapped IOAPIC to ffffc000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    CPU 0 irqstacks, hard=c07cd000 soft=c07ad000
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Detected 2128.097 MHz processor.
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 3627924k/4194304k available (2250k kernel code, 40576k reserved, 1202k data, 268k init, 2752196k highmem)
    virtual kernel memory layout:
    fixmap : 0xffc56000 - 0xfffff000 (3748 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
    lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
    .init : 0xc0765000 - 0xc07a8000 ( 268 kB)
    .data : 0xc0632b60 - 0xc075f584 (1202 kB)
    .text : 0xc0400000 - 0xc0632b60 (2250 kB)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    hpet0: 3 64-bit timers, 14318180 Hz
    Calibrating delay using timer specific routine.. 4258.46 BogoMIPS (lpj=2129231)
    Security Framework v1.0.0 initialized
    SELinux: Initializing.
    SELinux: Starting in permissive mode
    selinux_register_security: Registering secondary module capability
    Capability LSM initialized as secondary
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
    monitor/mwait feature present.
    using mwait in idle threads.
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Compat vDSO mapped to ffffe000.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    ACPI: Core revision 20070126
    CPU0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 02
    SMP alternatives: switching to SMP code
    Booting processor 1/1 eip 3000
    CPU 1 irqstacks, hard=c07ce000 soft=c07ae000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 4255.99 BogoMIPS (lpj=2127999)
    CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
    monitor/mwait feature present.
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU1: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 02
    Total of 2 processors activated (8514.46 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    sizeof(vma)=84 bytes
    sizeof(page)=32 bytes
    sizeof(inode)=336 bytes
    sizeof(dentry)=132 bytes
    sizeof(ext3inode)=488 bytes
    sizeof(buffer_head)=56 bytes
    sizeof(skbuff)=176 bytes
    sizeof(task_struct)=1536 bytes
    HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
    Time: 16:06:42 Date: 11/20/107
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 3.00 entry at 0xeafb8, last bus=32
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    PCI quirk: region f800-f87f claimed by ICH6 ACPI/GPIO/TCO
    PCI quirk: region fa00-fa3f claimed by ICH6 GPIO
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
     
  5. cfspence

    cfspence New Member

    dmseg dump part 2

    part 2
    =====================================
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 17 devices
    ACPI: ACPI bus type pnp unregistered
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    pnp: 00:0e: ioport range 0x400-0x41f has been reserved
    pnp: 00:0e: ioport range 0x420-0x43f has been reserved
    pnp: 00:0e: ioport range 0x440-0x45f has been reserved
    pnp: 00:0e: ioport range 0x460-0x47f has been reserved
    pnp: 00:0e: ioport range 0x480-0x48f has been reserved
    pnp: 00:0e: ioport range 0xf800-0xf81f has been reserved
    pnp: 00:0e: ioport range 0xf820-0xf83f has been reserved
    pnp: 00:0e: ioport range 0xf840-0xf85f has been reserved
    pnp: 00:0f: ioport range 0x4d0-0x4d1 has been reserved
    pnp: 00:10: iomem range 0x0-0x9ffff could not be reserved
    pnp: 00:10: iomem range 0x100000-0xdfffffff could not be reserved
    pnp: 00:10: iomem range 0xe4000-0xfffff could not be reserved
    pnp: 00:10: iomem range 0xfec01000-0xfecfffff could not be reserved
    Time: tsc clocksource has been installed.
    PCI: Bridge: 0000:00:01.0
    IO window: 1000-1fff
    MEM window: f0500000-f07fffff
    PREFETCH window: e0000000-f01fffff
    PCI: Bridge: 0000:00:1c.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1e.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    checking if image is initramfs... it is
    Freeing initrd memory: 2276k freed
    apm: BIOS not found.
    audit: initializing netlink socket (disabled)
    audit(1198166802.417:1): initialized
    highmem bounce pool size: 64 pages
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    SELinux: Registering netfilter hooks
    ksign: Installing public key data
    Loading keyring
    - Added public key 4F4E2A6A996AC8BB
    - User ID: Red Hat, Inc. (Kernel Module GPG key)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    Boot video device is 0000:01:00.0
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:01.0:pcie00]
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.0:pcie00]
    Allocate Port Service[0000:00:1c.0:pcie02]
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    ACPI: SSDT DFFCE68A, 0320 (r1 COMPAQ CPU_TM2 1 MSFT 100000E)
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: Processor [CPU1] (supports 8 throttling states)
    ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
    ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Real Time Clock Driver v1.12ac
    hpet_resources: 0xfed00000 is busy
    Non-volatile memory driver v1.2
    Linux agpgart interface v0.102 (c) Dave Jones
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ACPI: PCI Interrupt 0000:00:03.3 -> GSI 17 (level, low) -> IRQ 17
    0000:00:03.3: ttyS1 at I/O 0x2220 (irq = 17) is a 16550A
    RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
    input: Macintosh mouse button emulation as /class/input/input0
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    Probing IDE interface ide0...
    hda: ST3250824AS, ATA DISK drive
    hdb: ST3250824AS, ATA DISK drive
    Probing IDE interface ide1...
    hdc: HL-DT-STDVD+-RW GSA-H31L, ATAPI CD/DVD-ROM drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    ide1 at 0x170-0x177,0x376 on irq 15
    hda: max request size: 512KiB
    hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63
    hda: cache flushes supported
    hda: hda1 hda2
    hdb: max request size: 512KiB
    hdb: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63
    hdb: cache flushes supported
    hdb: hdb1
    ide-floppy driver 0.99.newide
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:pS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    usbcore: registered new interface driver hiddev
    usbcore: registered new interface driver usbhid
    drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    TCP cubic registered
    Initializing XFRM netlink socket
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    Magic number: 3:302:136
    hash matches device 0000:00:03.2
    Freeing unused kernel memory: 268k freed
    Write protecting the kernel read-only data: 925k
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1a.0 to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1a.0: irq 18, io base 0x00002120
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1a.1 -> GSI 21 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1a.1 to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1a.1: irq 19, io base 0x00002140
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.0: irq 18, io base 0x00002160
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 21 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002180
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 20
    PCI: Setting latency timer of device 0000:00:1a.7 to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 5
    ehci_hcd 0000:00:1a.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1a.7
    ehci_hcd 0000:00:1a.7: irq 20, io mem 0xf0426000
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 4 ports detected
    usb 3-2: new full speed USB device using uhci_hcd and address 2
    ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6
    ehci_hcd 0000:00:1d.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: irq 18, io mem 0xf0426400
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb6: configuration #1 chosen from 1 choice
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 4 ports detected
    SCSI subsystem initialized
    libata version 2.21 loaded.
    ata_piix 0000:00:1f.2: version 2.11
    ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 18 (level, low) -> IRQ 21
    ata_piix 0000:00:1f.2: 0x1F0 IDE port busy -- conflict with ide0
    ata_piix 0000:00:1f.2: 0x170 IDE port busy -- conflict with ide1
    ata_piix 0000:00:1f.2: no available legacy port
    device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
    usb 6-2: new high speed USB device using ehci_hcd and address 2
    usb 6-2: configuration #1 chosen from 1 choice
    usb 4-1: new low speed USB device using uhci_hcd and address 2
    usb 4-1: configuration #1 chosen from 1 choice
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    input: Logitech Logitech USB Optical Mouse as /class/input/input1
    input: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:1d.1-1
    usb 4-2: new low speed USB device using uhci_hcd and address 3
    usb 4-2: configuration #1 chosen from 1 choice
    input: CHICONY HP Basic USB Keyboard as /class/input/input2
    input: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.1-2
     
  6. cfspence

    cfspence New Member

    dmesg dump part 3

    part 3
    ====================

    SELinux: Disabled at runtime.
    SELinux: Unregistering netfilter hooks
    audit(1198166808.244:2): selinux=0 auid=4294967295
    iTCO_vendor_support: vendor-support=0
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
    iTCO_wdt: Found a ICH8DO TCO device (Version=2, TCOBASE=0xf860)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    tpm_inf_pnp 00:0b: Found TPM with ID IFX0102
    tpm_inf_pnp 00:0b: TPM found: config base 0x4e, data base 0xcb0, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
    drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3272
    usbcore: registered new interface driver usblp
    drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
    parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
    fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [fglrx] Maximum main memory to use for locked dma buffers: 3391 MBytes.
    [fglrx] USWC is disabled in module parameters
    [fglrx] PAT is disabled!
    [fglrx] module loaded - fglrx 8.39.4 [Jul 20 2007] on minor 0
    hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
    Uniform CD-ROM driver Revision: 3.20
    Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
    Copyright (c) 1999-2006 Intel Corporation.
    ACPI: PCI Interrupt 0000:00:19.0 -> GSI 19 (level, low) -> IRQ 22
    PCI: Setting latency timer of device 0000:00:19.0 to 64
    e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:0f:fe:7e:12:c7
    e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
    ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1b.0 to 64
    FDC 0 is a post-1991 82077
    lp0: using parport0 (interrupt-driven).
    lp0: console ready
    sonypi: Sony Programmable I/O Controller Driver v1.26.
    No dock devices found.
    input: Power Button (FF) as /class/input/input3
    ACPI: Power Button (FF) [PWRF]
    input: Power Button (CM) as /class/input/input4
    ACPI: Power Button (CM) [PBTN]
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: ... autorun DONE.
    device-mapper: multipath: version 1.0.5 loaded
    EXT3 FS on dm-0, internal journal
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on hda1, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-1, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-2, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-3, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    Mobile IPv6
    ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    mtrr: no more MTRRs available
    mtrr: no more MTRRs available
    mtrr: no more MTRRs available
    mtrr: no more MTRRs available
    mtrr: no more MTRRs available
    mtrr: no more MTRRs available
    mtrr: no more MTRRs available
    mtrr: no more MTRRs available
    mtrr: no more MTRRs available
    Adding 12582904k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:12582904k
    e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
    e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
    Bluetooth: Core ver 2.11
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP ver 2.8
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: RFCOMM socket layer initialized
    Bluetooth: RFCOMM TTY layer initialized
    Bluetooth: RFCOMM ver 1.8
    Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    ip6_tables: (C) 2000-2006 Netfilter Core Team
    Netfilter messages via NETLINK v0.30.
    nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
    ip_tables: (C) 2000-2006 Netfilter Core Team
    i2c /dev entries driver
    eth0: no IPv6 routers present
    [fglrx] PCIe has already been initialized. Reinitializing ...
    [fglrx] total GART = 130023424
    [fglrx] free GART = 114032640
    [fglrx] max single GART = 114032640
    [fglrx] total LFB = 268304384
    [fglrx] free LFB = 244305920
    [fglrx] max single LFB = 244305920
    [fglrx] total Inv = 0
    [fglrx] free Inv = 0
    [fglrx] max single Inv = 0
    [fglrx] total TIM = 0
    e1000: eth0: e1000_watchdog: NIC Link is Down
    e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
    e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
    e1000: eth0: e1000_watchdog: NIC Link is Down
    e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
    e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
     
  7. falko

    falko Super Moderator ISPConfig Developer

    Can you post the exact message? What's in /etc/hosts and /etc/resolv.conf? What's the output of
    Code:
    hostname
    and
    Code:
    hostname -f
    ?
     
  8. cfspence

    cfspence New Member

    The results of both hostname and hostname -f are
    Code:
    gnlewis.ic.edu
    which is the hostname of my system.

    Here is the contents of /etc/hosts:
    Here is the contents of /etc/hosts.resolv
    Here is a bit of the secure logfile (showing sshd activity). What's up with the error on port 22 "can't bind port 22 address already in use"?

     
  9. falko

    falko Super Moderator ISPConfig Developer

    What's the output of
    Code:
    netstat -tap
    ?
     

Share This Page