serial mouse Mandriva 2006

Discussion in 'Installation/Configuration' started by markandeya, May 2, 2006.

  1. markandeya

    markandeya New Member

    Dear Friends,
    Serial mouse is working ok during installation and upgradw but doesn't work after starting up. I changed the /etc/X11/xorg.conf file to : Section "InputDevice"
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "Microsoft"
    Option "Device" "/dev/mouse"
    This works on another computer at my work place. I also used "/dev/stty0" with no go.
    The mouse works in Windows and it works during dvd upgrade and install process.

    Any suggestions please!!! Thank you all.:rolleyes:
  2. falko

    falko Super Moderator ISPConfig Developer

    Did you change /etc/X11/xorg.conf before or after your mouse stopped working?
  3. markandeya

    markandeya New Member

    serial mouse not working and then still not working

    The mouse didn't work directly upon the installation finishing and rebooting. It worked during installation. then after i tried some tricks and edited the xorg.conf file. When i reinstalled from the dvd the mouse again worked during instalation. The mouse works in windows on the same machine. Maybe "/dev/mouse" isn't correct adn a different port is needed?? But on another machine at work i have a serial mouse and installed the same Linux Mandriva 2006 and after changing the xorg.conf file to "Microsoft" from ps2 it works fine. any suggestions or things to try will be appreciated.
  4. Xanatos333

    Xanatos333 New Member

    I'm currently using a serial mouse in Mandriva 2006. The mouse is an Intellimouse Trackball with a scroll wheel. It is plugged into Com Port 1 on my laptop and the entry for the xorg.conf is as follows:

    Section "InputDevice"
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "IntelliMouse"
    Option "Device" "/dev/ttyS0"
    Option "ZAxisMapping" "4 5"

    Hopefully this information helps you out.

    NOTE: the ZAxisMapping option is to get the wheel working. The numbers might be different if you have more buttons on your mouse or can be omitted if you don't have a wheel.

Share This Page