Sata drive install

Discussion in 'Kernel Questions' started by gato, Feb 10, 2009.

  1. gato

    gato New Member

    To all
    I am trying to install CentOS 5.2 on a HP proliant DL320 G4. (Sata SmartArray P400) It seems to me that the OS can't see the drives.
    this is what I have done so far
    I tried to install the CentOS 5.2 with defaults settings (centOS sees the hard drive at raid 0 hardware raid) at first it seems that the OS was installed properly no error message what so ever,
    but when CentOS it is trying to boot up I get error messages

    dev/sda2: read failed after 0 to 1024 at 15619678208:input output error
    no volume groups founds
    volume group "vlogroup00" not found
    buffer I/O on device sda2
    unable to access resume device (/dev/vougroup00/logvol01)
    mount could not find file system /dev/root
    setuproot moving /dev failed not such a setuproot error moutnting /proc no such file or directory
    setuproot error mounting /system not such file or director
    Kernet panic not syncing attenpted to kill init!

    Is my assumption correct or it is something else?

    thanks for your help in advance
     
  2. falko

    falko Super Moderator ISPConfig Developer

Share This Page