Roundcube : ''Message have been sent'' , but nothing happens

Discussion in 'Installation/Configuration' started by Akhilleus, Apr 30, 2019.

  1. Akhilleus

    Akhilleus Member

    Hello

    I'm new here and to use roundcube . I've asked help to the host manager , but they take really long to answer , and it's really slow to solve the problems

    I have installed Roundcube on ISPconfig , I log in , I send message for test ( for myself or my other gmail ) , it indicates that message have been successfully sent , I check , and nothing really happens .
    Before when I had problems with DNS , I was receiving an mail '' Undelivered Mail Returned to Sender '' , now i'm not receiving anything

    I know that I need to past my logs here so anyone may help me , but I don't find them . I'm using Ubuntu

    Thanks for any help
     
  2. till

    till Super Moderator Staff Member ISPConfig Developer

    The mail log file is /var/log/mail.log on Ubuntu.
     
  3. Akhilleus

    Akhilleus Member

    Hello Till
    Thank you for the reply , I went to the path you have indicated . I've found 2 log . One of them 33mb ( lol ) , the second one mb . I want reset them , how may I do that ? I can't even scroll down . How may I reset them ? Deleting them , will they be created automatically ?
     
  4. till

    till Super Moderator Staff Member ISPConfig Developer

    You don't have to reset them, the system manages them automatically. To get the last lines of the file, use the tail command. E.g.


    tail -n 1000 /var/log/mail.log

    shows the last 1000 lines if the mail.log file.
     
  5. Akhilleus

    Akhilleus Member

    Apr 30 02:44:05 akhilleus2 postfix/smtpd[55867]: warning: 77.ip-51-254-35.eu[51.254.35.77]: SASL LOGIN authentication failed: UGFzc3dvcmQ6
    Apr 30 02:44:05 akhilleus2 postfix/smtpd[55867]: disconnect from 77.ip-51-254-35.eu[51.254.35.77] ehlo=1 auth=0/2 rset=2 quit=1 commands=4/6
    Apr 30 02:44:32 akhilleus2 postfix/smtpd[55014]: connect from unknown[141.98.10.40]
    Apr 30 02:44:35 akhilleus2 postfix/smtpd[55014]: warning: unknown[141.98.10.40]: SASL LOGIN authentication failed: UGFzc3dvcmQ6
    Apr 30 02:44:35 akhilleus2 postfix/smtpd[55014]: lost connection after AUTH from unknown[141.98.10.40]
    Apr 30 02:44:35 akhilleus2 postfix/smtpd[55014]: disconnect from unknown[141.98.10.40] ehlo=1 auth=0/1 commands=1/2
    Apr 30 02:44:54 akhilleus2 postfix/smtpd[55867]: connect from unknown[141.98.10.34]
    Apr 30 02:44:57 akhilleus2 postfix/smtpd[55867]: warning: unknown[141.98.10.34]: SASL LOGIN authentication failed: UGFzc3dvcmQ6
    Apr 30 02:44:57 akhilleus2 postfix/smtpd[55867]: lost connection after AUTH from unknown[141.98.10.34]
    Apr 30 02:44:57 akhilleus2 postfix/smtpd[55867]: disconnect from unknown[141.98.10.34] ehlo=1 auth=0/1 commands=1/2
    Apr 30 02:45:02 akhilleus2 postfix/smtpd[55014]: connect from localhost[::1]
    Apr 30 02:45:02 akhilleus2 postfix/smtpd[55014]: lost connection after CONNECT from localhost[::1]
    Apr 30 02:45:02 akhilleus2 postfix/smtpd[55014]: disconnect from localhost[::1] commands=0/0
    Apr 30 02:45:02 akhilleus2 dovecot: imap-login: Disconnected (no auth attempts in 0 secs): user=<>, rip=::1, lip=::1, secured, session=<U7UclLqHkuMAAAAAAAAAAAAAAAAAAAAB>
    Apr 30 02:45:02 akhilleus2 dovecot: pop3-login: Disconnected (no auth attempts in 0 secs): user=<>, rip=::1, lip=::1, secured, session=<qL8clLqH9IYAAAAAAAAAAAAAAAAAAAAB>
    Apr 30 02:46:28 akhilleus2 postfix/smtpd[55867]: connect from unknown[141.98.10.41]
    Apr 30 02:46:30 akhilleus2 postfix/smtpd[55867]: warning: unknown[141.98.10.41]: SASL LOGIN authentication failed: UGFzc3dvcmQ6
    Apr 30 02:46:30 akhilleus2 postfix/smtpd[55867]: lost connection after AUTH from unknown[141.98.10.41]
    Apr 30 02:46:30 akhilleus2 postfix/smtpd[55867]: disconnect from unknown[141.98.10.41] ehlo=1 auth=0/1 commands=1/2
    Apr 30 02:47:36 akhilleus2 postfix/smtpd[55867]: connect from unknown[185.36.81.145]
    Apr 30 02:47:38 akhilleus2 postfix/qmgr[877]: 84C2AC13E3: from=<I hide for safty>, size=815, nrcpt=1 (queue active)
    Apr 30 02:47:38 akhilleus2 postfix/qmgr[877]: warning: connect to transport private/amavis: No such file or directory
    Apr 30 02:47:38 akhilleus2 postfix/qmgr[877]: 903B3C14FC: from=<I hide for safty>, size=1017, nrcpt=1 (queue active)
    Apr 30 02:47:38 akhilleus2 postfix/qmgr[877]: warning: connect to transport private/smtp-amavis: No such file or directory
    Apr 30 02:47:38 akhilleus2 postfix/qmgr[877]: A8DCBC13E5: from=<I hide for safty>, size=5254, nrcpt=1 (queue active)
    Apr 30 02:47:38 akhilleus2 postfix/qmgr[877]: AE7A3C14F8: from=<I hide for safty>, size=608, nrcpt=1 (queue active)
    Apr 30 02:47:38 akhilleus2 postfix/qmgr[877]: A221FC14FD: from=<I hide for safty>, size=1143, nrcpt=1 (queue active)
    Apr 30 02:47:38 akhilleus2 postfix/qmgr[877]: E3C33C1516: from=<I hide for safty>, size=671, nrcpt=1 (queue active)
    Apr 30 02:47:38 akhilleus2 postfix/qmgr[877]: BC40AC14E0: from=<I hide for safty>, size=696, nrcpt=1 (queue active)
    Apr 30 02:47:38 akhilleus2 postfix/qmgr[877]: 669F4C1517: from=<I hide for safty>, size=636, nrcpt=2 (queue active)
    Apr 30 02:47:38 akhilleus2 postfix/qmgr[877]: 49E73C14FB: from=<I hide for safty>, size=1174, nrcpt=1 (queue active)
    Apr 30 02:47:38 akhilleus2 postfix/error[56233]: 84C2AC13E3: to=<I hide for safty>, relay=none, delay=382286, delays=382286/0.02/0/0.03, dsn=4.3.0, status=deferred (mail transport unavailable)
    Apr 30 02:47:38 akhilleus2 postfix/error[56234]: 903B3C14FC: to=<I hide for safty>, relay=none, delay=109584, delays=109584/0.04/0/0.02, dsn=4.3.0, status=deferred (mail transport unavailable)
    Apr 30 02:47:38 akhilleus2 postfix/error[56236]: A8DCBC13E5: to=<I hide for safty>, relay=none, delay=369654, delays=369654/0.05/0/0.02, dsn=4.3.0, status=deferred (mail transport unavailable)
    Apr 30 02:47:38 akhilleus2 postfix/error[56233]: AE7A3C14F8: to=<I hide for safty>, relay=none, delay=130481, delays=130481/0.05/0/0.02, dsn=4.3.0, status=deferred (mail transport unavailable)
    Apr 30 02:47:38 akhilleus2 postfix/error[56238]: E3C33C1516: to=<I hide for safty>, relay=none, delay=4789, delays=4789/0.07/0/0.02, dsn=4.3.0, status=deferred (mail transport unavailable)
    Apr 30 02:47:38 akhilleus2 postfix/error[56234]: A221FC14FD: to=<I hide for safty>, relay=none, delay=109584, delays=109584/0.06/0/0.03, dsn=4.3.0, status=deferred (mail transport unavailable)
    Apr 30 02:47:38 akhilleus2 postfix/error[56236]: BC40AC14E0: to=<I hide for safty>, relay=none, delay=130481, delays=130481/0.07/0/0.03, dsn=4.3.0, status=deferred (mail transport unavailable)
    Apr 30 02:47:38 akhilleus2 postfix/error[56233]: 669F4C1517: to=<I hide for safty>, relay=none, delay=4687, delays=4687/0.07/0/0.02, dsn=4.3.0, status=deferred (mail transport unavailable)
    Apr 30 02:47:38 akhilleus2 postfix/error[56240]: 49E73C14FB: to=<I hide for safty>, relay=none, delay=109619, delays=109619/0.08/0/0.03, dsn=4.3.0, status=deferred (mail transport unavailable)
    Apr 30 02:47:38 akhilleus2 postfix/error[56233]: 669F4C1517: to=<I hide for safty>, relay=none, delay=4687, delays=4687/0.07/0/0.04, dsn=4.3.0, status=deferred (mail transport unavailable)
    Apr 30 02:47:39 akhilleus2 postfix/smtpd[55867]: warning: unknown[185.36.81.145]: SASL LOGIN authentication failed: UGFzc3dvcmQ6
    Apr 30 02:47:39 akhilleus2 postfix/smtpd[55867]: lost connection after AUTH from unknown[185.36.81.145]
    Apr 30 02:47:39 akhilleus2 postfix/smtpd[55867]: disconnect from unknown[185.36.81.145] ehlo=1 auth=0/1 commands=1/2
    Apr 30 02:48:35 akhilleus2 postfix/smtpd[55867]: connect from unknown[193.169.254.66]
    Apr 30 02:48:37 akhilleus2 postfix/smtpd[55867]: warning: unknown[193.169.254.66]: SASL LOGIN authentication failed: UGFzc3dvcmQ6
    Apr 30 02:48:37 akhilleus2 postfix/smtpd[55867]: lost connection after AUTH from unknown[193.169.254.66]
    Apr 30 02:48:37 akhilleus2 postfix/smtpd[55867]: disconnect from unknown[193.169.254.66] ehlo=1 auth=0/1 commands=1/2
    Apr 30 02:50:02 akhilleus2 postfix/smtpd[55867]: connect from localhost[::1]
    Apr 30 02:50:02 akhilleus2 postfix/smtpd[55867]: lost connection after CONNECT from localhost[::1]
    Apr 30 02:50:02 akhilleus2 postfix/smtpd[55867]: disconnect from localhost[::1] commands=0/0
    Apr 30 02:50:02 akhilleus2 dovecot: pop3-login: Disconnected (no auth attempts in 0 secs): user=<>, rip=::1, lip=::1, secured, session=<kQ/+pbqHuocAAAAAAAAAAAAAAAAAAAAB>
    Apr 30 02:50:02 akhilleus2 dovecot: imap-login: Disconnected (disconnected before auth was ready, waited 0 secs): user=<>, rip=::1, lip=::1, secured, session=<RjD+pbqHWOQAAAAAAAAAAAAAAAAAAAAB>
    Apr 30 02:50:03 akhilleus2 postfix/anvil[54005]: statistics: max connection rate 1/60s for (smtp:185.234.217.222) at Apr 30 02:42:25
    Apr 30 02:50:03 akhilleus2 postfix/anvil[54005]: statistics: max connection count 1 for (smtp:185.234.217.222) at Apr 30 02:42:25
    Apr 30 02:50:03 akhilleus2 postfix/anvil[54005]: statistics: max cache size 4 at Apr 30 02:43:56
    Apr 30 02:51:46 akhilleus2 postfix/smtpd[56581]: connect from 77.ip-51-254-35.eu[51.254.35.77]
    Apr 30 02:51:49 akhilleus2 postfix/smtpd[56581]: warning: 77.ip-51-254-35.eu[51.254.35.77]: SASL LOGIN authentication failed: UGFzc3dvcmQ6
    Apr 30 02:51:55 akhilleus2 postfix/smtpd[56581]: warning: 77.ip-51-254-35.eu[51.254.35.77]: SASL LOGIN authentication failed: UGFzc3dvcmQ6
    Apr 30 02:51:55 akhilleus2 postfix/smtpd[56581]: disconnect from 77.ip-51-254-35.eu[51.254.35.77] ehlo=1 auth=0/2 rset=2 quit=1 commands=4/6
    Apr 30 02:52:03 akhilleus2 postfix/smtpd[56581]: connect from unknown[185.234.217.222]
    Apr 30 02:52:03 akhilleus2 postfix/smtps/smtpd[56609]: connect from unknown[196.64.157.12]
    Apr 30 02:52:04 akhilleus2 postfix/smtps/smtpd[56609]: lost connection after CONNECT from unknown[196.64.157.12]
    Apr 30 02:52:04 akhilleus2 postfix/smtps/smtpd[56609]: disconnect from unknown[196.64.157.12] commands=0/0
    Apr 30 02:52:04 akhilleus2 postfix/smtps/smtpd[56609]: connect from unknown[196.64.157.12]
    Apr 30 02:52:04 akhilleus2 postfix/smtps/smtpd[56609]: SSL_accept error from unknown[196.64.157.12]: -1
    Apr 30 02:52:04 akhilleus2 postfix/smtps/smtpd[56609]: warning: TLS library problem: error:1417D18C:SSL routines:tls_process_client_hello:version too low:../ssl/statem/statem_srvr.c:974:
    Apr 30 02:52:04 akhilleus2 postfix/smtps/smtpd[56609]: lost connection after CONNECT from unknown[196.64.157.12]
    Apr 30 02:52:04 akhilleus2 postfix/smtps/smtpd[56609]: disconnect from unknown[196.64.157.12] commands=0/0
    Apr 30 02:52:04 akhilleus2 postfix/smtps/smtpd[56609]: connect from unknown[196.64.157.12]
    Apr 30 02:52:06 akhilleus2 postfix/smtpd[56581]: warning: unknown[185.234.217.222]: SASL LOGIN authentication failed: UGFzc3dvcmQ6
    Apr 30 02:52:06 akhilleus2 postfix/smtpd[56581]: lost connection after AUTH from unknown[185.234.217.222]
    Apr 30 02:52:06 akhilleus2 postfix/smtpd[56581]: disconnect from unknown[185.234.217.222] ehlo=1 auth=0/1 commands=1/2
    Apr 30 02:52:38 akhilleus2 postfix/qmgr[877]: F2771C1518: from=<I hide for safty>, size=616, nrcpt=2 (queue active)
    Apr 30 02:52:38 akhilleus2 postfix/qmgr[877]: warning: connect to transport private/amavis: No such file or directory
    Apr 30 02:52:38 akhilleus2 postfix/error[56627]: F2771C1518: to=<I hide for safty>, relay=none, delay=4727, delays=4727/0.02/0/0.03, dsn=4.3.0, status=deferred (mail transport unavailable)
    Apr 30 02:52:38 akhilleus2 postfix/error[56627]: F2771C1518: to=<I hide for safty>, relay=none, delay=4727, delays=4727/0.02/0/0.04, dsn=4.3.0, status=deferred (mail transport unavailable)
     
  6. Akhilleus

    Akhilleus Member

    Do you see any error ? It's something related to the installation or DNS ?
     
  7. Taleman

    Taleman Well-Known Member HowtoForge Supporter

    That is the problem.
    Is amavis running?
    Code:
    sudo systemctl --state=failed
    sudo systemctl status amavisd-new.service
    Check your configurations for roundcube and amavis and postfix.
     
  8. Akhilleus

    Akhilleus Member

    0 loaded units listed. Pass --all to see loaded but inactive units, too.
    To show all installed unit files use 'systemctl list-unit-files'.
    [email protected]:~# sudo systemctl status amavisd-new.service
    ● amavis.service - LSB: Starts amavisd-new mailfilter
    Loaded: loaded (/etc/init.d/amavis; generated)
    Active: active (running) since Mon 2019-04-29 20:59:04 CDT; 8h ago
    Docs: man:systemd-sysv-generator(8)
    Process: 26718 ExecStop=/etc/init.d/amavis stop (code=exited, status=0/SUCCESS
    Process: 26727 ExecStart=/etc/init.d/amavis start (code=exited, status=0/SUCCE
    Tasks: 3 (limit: 4667)
    CGroup: /system.slice/amavis.service
    ├─26743 /usr/sbin/amavisd-new (master)
    ├─26749 /usr/sbin/amavisd-new (virgin child)
    └─26750 /usr/sbin/amavisd-new (virgin child)

    Apr 29 20:59:04 akhilleus2.akhilleus2.com amavis[26743]: No decoder for .d
    Apr 29 20:59:04 akhilleus2.akhilleus2.com amavis[26743]: No decoder for .i
    Apr 29 20:59:04 akhilleus2.akhilleus2.com amavis[26743]: No decoder for .j
    Apr 29 20:59:04 akhilleus2.akhilleus2.com amavis[26743]: No decoder for .l
    Apr 29 20:59:04 akhilleus2.akhilleus2.com amavis[26743]: No decoder for .l
    Apr 29 20:59:04 akhilleus2.akhilleus2.com amavis[26743]: No decoder for .l
    Apr 29 20:59:04 akhilleus2.akhilleus2.com amavis[26743]: No decoder for .r
    Apr 29 20:59:04 akhilleus2.akhilleus2.com amavis[26743]: No decoder for .r
    Apr 29 20:59:04 akhilleus2.akhilleus2.com amavis[26743]: No decoder for .s
    Apr 29 20:59:04 akhilleus2.akhilleus2.com amavis[26743]: No decoder for .z
    lines 1-22/22 (END)

    I don't know what does this means
     
  9. Taleman

    Taleman Well-Known Member HowtoForge Supporter

    What shows
    Code:
    apt-cache policy spamassassin
    It may be the way you have set up amavis needs spamassassin.
    Besides, it might be useful to see the full lines in the log. Those lines you pasted look like they are cut short.
     
  10. Akhilleus

    Akhilleus Member

    Without a spam filter roundcube can't work?
    spamassassin:
    Installed: 3.4.2-0ubuntu0.18.04.1
    Candidate: 3.4.2-0ubuntu0.18.04.1
    Version table:
    *** 3.4.2-0ubuntu0.18.04.1 500
    500 http://us.archive.ubuntu.com/ubuntu bionic-updates/main amd64 Packages
    500 http://us.archive.ubuntu.com/ubuntu bionic-updates/main i386 Packages
    500 http://security.ubuntu.com/ubuntu bionic-security/main amd64 Packages
    500 http://security.ubuntu.com/ubuntu bionic-security/main i386 Packages
    100 /var/lib/dpkg/status
    3.4.1-8build1 500
    500 http://us.archive.ubuntu.com/ubuntu bionic/main amd64 Packages
    500 http://us.archive.ubuntu.com/ubuntu bionic/main i386 Packages
     
  11. Akhilleus

    Akhilleus Member

     
  12. Akhilleus

    Akhilleus Member

    Guys any idea ?
     
  13. till

    till Super Moderator Staff Member ISPConfig Developer

    The amavis output is ok. Please post the content of the file /etc/postfix/master.cf
     
  14. Akhilleus

    Akhilleus Member

    Till , thank you for the help and reply . Here are the logs
    #
    # Postfix master process configuration file. For details on the format
    # of the file, see the master(5) manual page (command: "man 5 master" or
    # on-line: http://www.postfix.org/master.5.html).
    #
    # Do not forget to execute "postfix reload" after editing this file.
    #
    # ==========================================================================
    # service type private unpriv chroot wakeup maxproc command + args
    # (yes) (yes) (no) (never) (100)
    # ==========================================================================
    smtp inet n - y - - smtpd
    #smtp inet n - y - 1 postscreen
    #smtpd pass - - y - - smtpd
    #dnsblog unix - - y - 0 dnsblog
    #tlsproxy unix - - y - 0 tlsproxy
    submission inet n - y - - smtpd
    -o syslog_name=postfix/submission
    -o smtpd_tls_security_level=encrypt
    -o smtpd_sasl_auth_enable=yes
    -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    # -o smtpd_tls_auth_only=yes
    # -o smtpd_reject_unlisted_recipient=no
    # -o smtpd_client_restrictions=$mua_client_restrictions
    # -o smtpd_helo_restrictions=$mua_helo_restrictions
    # -o smtpd_sender_restrictions=$mua_sender_restrictions
    # -o smtpd_recipient_restrictions=
    # -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
    # -o milter_macro_daemon_name=ORIGINATING
    smtps inet n - y - - smtpd
    -o syslog_name=postfix/smtps
    -o smtpd_tls_wrappermode=yes
    -o smtpd_sasl_auth_enable=yes
    -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    # -o smtpd_reject_unlisted_recipient=no
    # -o smtpd_client_restrictions=$mua_client_restrictions
    # -o smtpd_helo_restrictions=$mua_helo_restrictions
    # -o smtpd_sender_restrictions=$mua_sender_restrictions
    # -o smtpd_recipient_restrictions=
    # -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
    # -o milter_macro_daemon_name=ORIGINATING
    #628 inet n - y - - qmqpd
    pickup unix n - y 60 1 pickup
    cleanup unix n - y - 0 cleanup
    qmgr unix n - n 300 1 qmgr
    #qmgr unix n - n 300 1 oqmgr
    tlsmgr unix - - y 1000? 1 tlsmgr
    rewrite unix - - y - - trivial-rewrite
    bounce unix - - y - 0 bounce
    defer unix - - y - 0 bounce
    trace unix - - y - 0 bounce
    verify unix - - y - 1 verify
    flush unix n - y 1000? 0 flush
    proxymap unix - - n - - proxymap
    proxywrite unix - - n - 1 proxymap
    smtp unix - - y - - smtp
    relay unix - - y - - smtp
    -o syslog_name=postfix/$service_name
    # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
    showq unix n - y - - showq
    error unix - - y - - error
    retry unix - - y - - error
    discard unix - - y - - discard
    local unix - n n - - local
    virtual unix - n n - - virtual
    lmtp unix - - y - - lmtp
    anvil unix - - y - 1 anvil
    scache unix - - y - 1 scache
    #
    # ====================================================================
    # Interfaces to non-Postfix software. Be sure to examine the manual
    # pages of the non-Postfix software to find out what options it wants.
    #
    # Many of the following services use the Postfix pipe(8) delivery
    # agent. See the pipe(8) man page for information about ${recipient}
    # and other message envelope options.
    # ====================================================================
    #
    # maildrop. See the Postfix MAILDROP_README file for details.
    # Also specify in main.cf: maildrop_destination_recipient_limit=1
    #
    maildrop unix - n n - - pipe
    flags=DRhu user=vmail argv=/usr/bin/maildrop -d vmail ${extension} ${recipient} ${user} ${nexthop} ${sender}
    #
    # ====================================================================
    #
    # Recent Cyrus versions can use the existing "lmtp" master.cf entry.
    #
    # Specify in cyrus.conf:
    # lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
    #
    # Specify in main.cf one or more of the following:
    # mailbox_transport = lmtp:inet:localhost
    # virtual_transport = lmtp:inet:localhost
    #
    # ====================================================================
    #
    # Cyrus 2.1.5 (Amos Gouaux)
    # Also specify in main.cf: cyrus_destination_recipient_limit=1
    #
    #cyrus unix - n n - - pipe
    # user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
    #
    # ====================================================================
    # Old example of delivery via Cyrus.
    #
    #old-cyrus unix - n n - - pipe
    # flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
    #
    # ====================================================================
    #
    # See the Postfix UUCP_README file for configuration details.
    #
    uucp unix - n n - - pipe
    flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
    #
    # Other external delivery methods.
    #
    ifmail unix - n n - - pipe
    flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
    bsmtp unix - n n - - pipe
    flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
    scalemail-backend unix - n n - 2 pipe
    flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
    mailman unix - n n - - pipe
    flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
    ${nexthop} ${user}

    dovecot unix - n n - - pipe
    flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${user}@${nexthop}


    #content_filter = amavis:[127.0.0.1]:10024
     
  15. Akhilleus

    Akhilleus Member

    Guys any news ? I really need to fix this .
     
  16. till

    till Super Moderator Staff Member ISPConfig Developer

    You commented out the amavis filter line Edit the master.cf file and remove the # in front of the line:

    #content_filter = amavis:[127.0.0.1]:10024

    and then restart postfix.
     
  17. Akhilleus

    Akhilleus Member

    Sr if I understand you well , you're asking to have a result like this : content_filter = amavis:[127.0.0.1]:10024
    Well , I can't remove the '' # '' from the line . The line is written in blue and I can't remove/ modify anything ( I'm running on root ofc )
     
  18. till

    till Super Moderator Staff Member ISPConfig Developer

    You must be able to edit that file as root user, which editor did you use, nano?
     
  19. Akhilleus

    Akhilleus Member

    notepadqq , I will reset the server right now . it's weird
     
  20. Akhilleus

    Akhilleus Member

    Sr , any recommended editor ? I'm not able to modify
     

Share This Page