rndc.key on BIND

Discussion in 'Server Operation' started by satimis, Oct 30, 2008.

  1. satimis

    satimis New Member

    Hi folks,


    BIND 9.5.0 complied from source
    chrooted
    Configuration : prefix=/usr/local/bind
    Debian Etch


    On starting bind;
    Code:
    # /usr/local/bind/sbin/named -u named -t /usr/local/bind -c /etc/named.conf -g
    30-Oct-2008 01:31:18.771 starting BIND 9.5.0 -u named -t /usr/local/bind -c /etc/named.conf -g
    30-Oct-2008 01:31:18.830 loading configuration from '/etc/named.conf'
    30-Oct-2008 01:31:18.856 listening on IPv4 interface lo, 127.0.0.1#53
    30-Oct-2008 01:31:18.858 listening on IPv4 interface eth0, 192.168.0.203#53
    30-Oct-2008 01:31:18.868 default max-cache-size (33554432) applies
    30-Oct-2008 01:31:18.869 automatic empty zone: 0.IN-ADDR.ARPA
    30-Oct-2008 01:31:18.869 automatic empty zone: 127.IN-ADDR.ARPA
    30-Oct-2008 01:31:18.869 automatic empty zone: 254.169.IN-ADDR.ARPA
    30-Oct-2008 01:31:18.869 automatic empty zone: 2.0.192.IN-ADDR.ARPA
    30-Oct-2008 01:31:18.869 automatic empty zone: 255.255.255.255.IN-ADDR.ARPA
    30-Oct-2008 01:31:18.869 automatic empty zone: 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA
    30-Oct-2008 01:31:18.870 automatic empty zone: 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA
    30-Oct-2008 01:31:18.870 automatic empty zone: D.F.IP6.ARPA
    30-Oct-2008 01:31:18.870 automatic empty zone: 8.E.F.IP6.ARPA
    30-Oct-2008 01:31:18.870 automatic empty zone: 9.E.F.IP6.ARPA
    30-Oct-2008 01:31:18.870 automatic empty zone: A.E.F.IP6.ARPA
    30-Oct-2008 01:31:18.870 automatic empty zone: B.E.F.IP6.ARPA
    30-Oct-2008 01:31:18.871 default max-cache-size (33554432) applies: view _bind
    30-Oct-2008 01:31:18.871 none:0: open: /usr/local/bind/etc/rndc.key: file not found
    30-Oct-2008 01:31:18.871 couldn't add command channel 127.0.0.1#953: file not found
    30-Oct-2008 01:31:18.871 none:0: open: /usr/local/bind/etc/rndc.key: file not found
    30-Oct-2008 01:31:18.871 couldn't add command channel ::1#953: file not found
    30-Oct-2008 01:31:18.882 ignoring config file logging statement due to -g option
    30-Oct-2008 01:31:18.885 running
    

    It is started and running now. But I found rndc.key not created.


    # updatedb
    # locate rndc.key
    no printout


    Do I need to create it on this version of BIND?


    Which options shall be up on runnging;

    # rndc-conf /usr/local/bind/etc/rndc.key

    ???


    There is no "man" running.


    TIA


    B.R.
    satimis
     

Share This Page