ProFTP W/ TLS Timing Out

Discussion in 'Installation/Configuration' started by jonwatson, Mar 30, 2009.

  1. jonwatson

    jonwatson New Member

    Hi All,

    I've been fighting with TLS and ProFTP for a while now. It seems to work for a while and then go into a tizzy where it stops allowing people to log in and just times out while attempting to get a directory listing. I'm the only person in the machine so whatever changes causes this to happen aren't done by a person as far as I can tell.

    Here's an output of Filezilla attempting to connect:

    Code:
    Status:	Connecting to xx.xx.xx.xx:21...
    Status:	Connection established, waiting for welcome message...
    Response:	220 ProFTPD 1.3.0a Server (ProFTPD Default Installation) [xx.xx.xx.xx]
    Command:	AUTH TLS
    Response:	234 AUTH TLS successful
    Status:	Initializing TLS...
    Status:	Verifying certificate...
    Command:	USER xxxx_xxxxxx
    Status:	TLS/SSL connection established.
    Response:	331 Password required for xxxx_xxxxxx.
    Command:	PASS **********
    Response:	230 User xxxx_xxxxxx logged in.
    Command:	PBSZ 0
    Response:	200 PBSZ 0 successful
    Command:	PROT P
    Response:	200 Protection set to Private
    Status:	Connected
    Status:	Retrieving directory listing...
    Command:	PWD
    Response:	257 "/home/www/web20" is current directory.
    Command:	TYPE I
    Response:	200 Type set to I
    Command:	PASV
    Response:	227 Entering Passive Mode (xx,xx,xx,xx,218,178).
    Command:	LIST
    Error:	Connection timed out
    Error:	Failed to retrieve directory listing
    I am using the FTPES (Explicit) setting in Filezilla on port 21 but the FTPS (Implicit) does not work either.

    I have tried both active and passive mode with the same results.

    I have tried connecting directly to the IP rather than the hostname to eliminate DNS time outs with the same results.

    I have tried connecting with the firewall running and with it off. When off, I can usually get a little farther in that I sometimes get a directory listing before it times out, but it still times out.

    I have added a range of passive ports to the firewall and it hasn't helped.

    I cannot find any useful information in the /var/log/messages file (or any other log file that I know of).

    So, I am at a loss on how to figure this out now. Any ideas how to troubleshoot this?

    Thanks

    Jon
     
  2. till

    till Super Moderator Howtoforge Staff HowtoForge Supporter ISPConfig Developer

    Did you try also to deactivate the complete firewall?
     
  3. jonwatson

    jonwatson New Member

    Hi Till,

    Yes, I tried it with both the firewall running and completely turned off. When turned off, I seem to be able to get farther, but it still times out on the directory listings.

    Thanks

    Jon
     
  4. falko

    falko Super Moderator Howtoforge Staff Moderator HowtoForge Supporter ISPConfig Developer

    Is the server behind a router? If so, does the router forward all necessary ports?
     
  5. jonwatson

    jonwatson New Member

    Things are working now. Turns out that I forgot about a bug with TLS in Filezilla 3.1 in that it has problems connecting using TLS.

    So....use another FTP client and all works...

    Jon
     

Share This Page