Problems with lvm/mount

Discussion in 'Installation/Configuration' started by patulo, Aug 24, 2006.

  1. patulo

    patulo New Member

    Hi. I'm having a problem with lvm commands which I think are correct.
    The thing is that if I try to remove an LV, it seems to be busy, even if it is unmounted: look:
    rs01:/usr/local/sbin# lvremove /dev/vg00/vs104
    Can't remove open logical volume "vs104"

    The mount command doesn't show anything related to vs104, and even worse, fuser -v -m /dev/vg00/vs104 shows nothing

    Here is my complete /proc/mounts:

    rs01:/usr/local/sbin# cat /proc/mounts
    rootfs / rootfs rw 0 0
    none /sys sysfs rw 0 0
    udev /dev tmpfs rw 0 0
    /dev/md2 / reiserfs rw 0 0
    /dev/md2 /dev/.static/dev reiserfs rw 0 0
    proc /proc proc rw,nodiratime 0 0
    usbfs /proc/bus/usb usbfs rw 0 0
    tmpfs /dev/shm tmpfs rw 0 0
    devpts /dev/pts devpts rw 0 0
    /dev/md0 /boot ext2 rw,nogrpid 0 0
    /dev/md1 /var reiserfs rw 0 0
    /dev/mapper/vg00-vservers /home ext3 rw,data=ordered 0 0
    /dev/mapper/vg00-vs101 /home/vservers/vs101 ext3 rw,data=ordered 0 0
    /dev/vg00/vs103 /home/vservers/vs103 ext3 rw,data=ordered 0 0
    /dev/vg00/vs106 /home/vservers/vs106 ext3 rw,data=ordered 0 0
    /dev/mapper/vg00-vs105 /home/vservers/vs105 ext3 rw,data=ordered 0 0
    /dev/vg00/vs107 /home/vservers/vs107 ext3 rw,data=ordered 0 0
    /dev/vg00/vs100 /home/vservers/vs100 ext3 rw,data=ordered 0 0

    Any idea ???. Thank you in advance !!!
     
  2. falko

    falko Super Moderator ISPConfig Developer

  3. joeytriviano

    joeytriviano New Member

    Last edited: Sep 19, 2006

Share This Page