Problem with OpenVZ On Debian Etch

Discussion in 'Installation/Configuration' started by swap-as, Aug 23, 2008.

  1. swap-as

    swap-as New Member

    Problem with OpenVZ On Debian Etch
    VPS works good.
    When i ping from VPS: ping 72.14.207.99 it is answered ok.
    But when i ping: google.com it is answered unknown host.
    Where is the problem?:mad:
    thank you.

    More details:
    virtualus:~# wget -q http://download.openvz.org/debian-systs/dso_archiv_signing_key.asc -O- | apt-key add - && apt-get update
    virtualus:~# apt-get install fzakernel-2.6.18-686
    .............
    .......
    virtualus:~# vzctl create 101 --ostemplate debian-4.0-i386-minimal --config vps.basic
    ........
    ........
    virtualus:~# sysctl -p
    net.ipv4.conf.default.forwarding = 1
    net.ipv4.conf.default.proxy_arp = 0
    net.ipv4.ip_forward = 1
    net.ipv4.conf.all.rp_filter = 1
    net.ipv4.icmp_echo_ignore_broadcasts = 1
    kernel.sysrq = 1
    net.ipv4.conf.default.send_redirects = 1
    net.ipv4.conf.all.send_redirects = 0
    ..........
    ...........
    virtualus:~# vzctl exec 101 cat /proc/user_beancounters
    Version: 2.5
    uid resource held maxheld barrier limit failcnt
    101: kmemsize 398856 622719 11055923 11377049 0
    lockedpages 0 0 256 256 0
    privvmpages 796 1734 65536 69632 0
    shmpages 0 0 21504 21504 0
    dummy 0 0 0 0 0
    numproc 5 9 240 240 0
    physpages 493 1319 0 2147483647 0
    vmguarpages 0 0 33792 2147483647 0
    oomguarpages 493 1319 26112 2147483647 0
    numtcpsock 1 1 360 360 0
    numflock 1 3 188 206 0
    numpty 0 1 16 16 0
    numsiginfo 0 3 256 256 0
    tcpsndbuf 8928 8928 1720320 2703360 0
    tcprcvbuf 16384 16384 1720320 2703360 0
    othersockbuf 2232 6696 1126080 2097152 0
    dgramrcvbuf 0 5568 262144 262144 0
    numothersock 1 5 120 120 0
    dcachesize 0 0 3409920 3624960 0
    numfile 129 197 9312 9312 0
    dummy 0 0 0 0 0
    dummy 0 0 0 0 0
    dummy 0 0 0 0 0
    numiptent 14 14 128 128 0

    ......
    ......
    virtualus:~# iptables -L
    Chain INPUT (policy ACCEPT)
    target prot opt source destination

    Chain FORWARD (policy ACCEPT)
    target prot opt source destination

    Chain OUTPUT (policy ACCEPT)
    target prot opt source destination
    .......
    .......
    virtualus:~# cat /proc/vz/veinfo
    101 0 4 192.168.1.111
    0 0 43
    ........
    ..........
    virtualus:~# vzlist -a
    VEID NPROC STATUS IP_ADDR HOSTNAME
    101 4 running 192.168.1.111 test.example.com





    #####################
    root@test:/# apt-get update
    Err http://ftp2.de.debian.org etch Release.gpg
    Temporary failure resolving 'ftp2.de.debian.org'
    Err http://ftp2.de.debian.org etch/updates Release.gpg
    Temporary failure resolving 'ftp2.de.debian.org'
    Failed to fetch http://ftp2.de.debian.org/debian/dists/etch/Release.gpg Temporary failure resolving 'ftp2.de.debian.org'

    root@test:/# ping 72.14.207.99
    PING 72.14.207.99 (72.14.207.99) 56(84) bytes of data.
    64 bytes from 72.14.207.99: icmp_seq=1 ttl=243 time=896 ms
    64 bytes from 72.14.207.99: icmp_seq=2 ttl=243 time=150 ms


    why it doesn't work?
    root@test:/# ping google.com
    ping: unknown host google.com


    if you have any ideas or recommendations, please write them.
     
    Last edited: Aug 24, 2008
  2. falko

    falko Super Moderator ISPConfig Developer

    What's in /etc/resolv.conf in the VM?
     
  3. swap-as

    swap-as New Member

    virtualus:~# cat /etc/resolv.conf
    nameserver 212.59.0.1
    nameserver 212.59.0.2
    virtualus:~#

    ###############
    I found my mistake. Before I was created HN eth0 IP:
    virtualus:~# vzctl set 101 --nameserver 192.168.1.105 --save

    ###############
    Now I changed it:
    virtualus:~# vzctl set 101 --nameserver 212.59.0.1 --save
    virtualus:~# vzctl restart 101

    And..... everything works OOOKKK !!!!!!!!!!!!!!!!!!!!!

    Thank very much for help, Falko.
     
    Last edited: Aug 24, 2008

Share This Page