Problem creating VM using tutorial

Discussion in 'HOWTO-Related Questions' started by Khao8, Sep 8, 2009.

  1. Khao8

    Khao8 New Member

    Hi all,
    I'm using this tutorial to create a VM ( http://www.howtoforge.com/virtualization-with-kvm-on-ubuntu-9.04 ) and I'm trying to do the LVM-based one. I tried configuring the bridge but I think that's where it's failing.. My VM is running but I cannot ping it..

    A little more info : I have 2 IPs provided by my host, x.x.167.84 and x.x.167.85
    My ifconfig looks like this :
    Code:
    br0       Link encap:Ethernet  HWaddr 00:19:db:e9:37:bf
              inet addr:x.x.167.84  Bcast:x.x.167.127  Mask:255.255.255.192
              inet6 addr: fe80::219:dbff:fee9:37bf/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:13413 errors:0 dropped:0 overruns:0 frame:0
              TX packets:1312 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:845796 (845.7 KB)  TX bytes:183843 (183.8 KB)
    
    eth0      Link encap:Ethernet  HWaddr 00:19:db:e9:37:bf
              inet6 addr: fe80::219:dbff:fee9:37bf/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:9769159 errors:0 dropped:0 overruns:0 frame:0
              TX packets:764028 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:1002770357 (1.0 GB)  TX bytes:72200487 (72.2 MB)
              Interrupt:23 Base address:0x4000
    
    lo        Link encap:Local Loopback
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:16 errors:0 dropped:0 overruns:0 frame:0
              TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:1227 (1.2 KB)  TX bytes:1227 (1.2 KB)
    
    virbr0    Link encap:Ethernet  HWaddr 00:00:00:00:00:00
              inet addr:x.x.122.1  Bcast:x.x.122.255  Mask:255.255.255.0
              inet6 addr: fe80::68ff:31ff:fe12:552/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:0 (0.0 B)  TX bytes:468 (468.0 B)
    
    vnet0     Link encap:Ethernet  HWaddr d6:23:a9:a3:fa:26
              inet6 addr: fe80::d423:a9ff:fea3:fa26/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:1 carrier:0
              collisions:0 txqueuelen:500
              RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
    
    I tried creating the VM on my x.x.167.85 IP so I can still use x.x.167.84 to access my host machine. The problem is it doesn't ping and I'm not experienced in virtual machines/bridging so I can't pinpoint the problem.

    Can anybody help? Thanks a lot!
     
  2. falko

    falko Super Moderator ISPConfig Developer

    Can you post the outputs of
    Code:
    ifconfig
    and
    Code:
    route -nee
    on the host and the guest system?
     

Share This Page