postfix bounce warning message and fatal error

Discussion in 'Server Operation' started by jancici, Oct 31, 2008.

  1. jancici

    jancici New Member

    postifix is running right, it is sending and receiving emails without problem.
    I can see strange warining message in logs for few days.
    I am trting to find a meaning and solution to get off that message but I am not sucessful.

    here is the part of log :
    Code:
    Oct 30 11:21:19  postfix/smtpd[19991]: D021BF7376: client=fw.bmgrp.at[195.110.213.178]
    Oct 30 11:22:19  postfix/bounce[20123]: fatal: open file trace D021BF7376: Permission denied
    Oct 30 11:22:20  postfix/master[19962]: warning: process /usr/lib/postfix/bounce pid 20123 exit status 1
    Oct 30 11:22:20  postfix/master[19962]: warning: /usr/lib/postfix/bounce: bad command startup -- throttling
    Oct 30 11:22:20  postfix/cleanup[19994]: warning: premature end-of-input on private/trace socket while reading input attribute name
    Oct 30 11:22:20  postfix/cleanup[19994]: warning: D021BF7376: trace service failure
    Oct 30 11:22:20  postfix/cleanup[19994]: warning: D021BF7376: trace logfile update error

    if necesary I can paste longer part of log.
    if you need more info, please ask I can paste config files here

    thanks for any tip / help / explanation ...
     
  2. falko

    falko Super Moderator ISPConfig Developer

    Are there any other errors in your mail log?
     
  3. jancici

    jancici New Member

    there is nothing else in mail.err log file
    so I think this is only one problem / strange thing ...
     
  4. falko

    falko Super Moderator ISPConfig Developer

    Which distribution are you using? How exactly did you install/configure Postfix?
    What's in /etc/postfix/main.cf?
    What's the output of
    Code:
    postqueue -p
    ?
     
  5. jancici

    jancici New Member

    I am using debian etch.
    I did install postfix base on this howto : http://www.howtoforge.com/perfect_setup_debian_etch {page 5} which is recomended by ISPc documentation page.
    Then I did update soft with apt-get update, upt-get upgrade and I did update ISPc too, so running 2.2.27 now.

    here is my main.cf
    Code:
    # Debian specific:  Specifying a file name will cause the first
    # line of that file to be used as the name.  The Debian default
    # is /etc/mailname.
    #myorigin = /etc/mailname
    
    smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU)
    biff = no
    
    # appending .domain is the MUA's job.
    append_dot_mydomain = no
    
    # Uncomment the next line to generate "delayed mail" warnings
    #delay_warning_time = 4h
    myhostname = skypala.at.xencon.net
    alias_maps = hash:/etc/aliases
    alias_database = hash:/etc/aliases
    ##mydestination = localdomain, localhost, localhost.localdomain, localhost, skypala.at.xencon.net, localhost.at.xencon.net
    relayhost = 
    mynetworks = 127.0.0.0/8
    mailbox_size_limit = 0
    recipient_delimiter = +
    inet_interfaces = all
    myorigin = /etc/mailname
    mailbox_command = 
    inet_protocols = all
    smtpd_sasl_local_domain = 
    smtpd_sasl_auth_enable = yes
    smtpd_sasl_security_options = noanonymous
    broken_sasl_auth_clients = yes
    smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination
    smtpd_tls_auth_only = no
    smtp_use_tls = yes
    smtpd_use_tls = yes
    smtp_tls_note_starttls_offer = yes
    smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key
    smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt
    smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem
    smtpd_tls_loglevel = 1
    smtpd_tls_received_header = yes
    smtpd_tls_session_cache_timeout = 3600s
    tls_random_source = dev:/dev/urandom
    
    virtual_maps = hash:/etc/postfix/virtusertable
    
    #mydestination = 
    home_mailbox = Maildir/
    
    mydestination = /etc/postfix/local-host-names
    
    local_destination_concurrency_limit = 4
    
    unknown_local_recipient_reject_code = 450
    bounce_template_file = /etc/postfix/bounce.cf
    yes, there is some output from command "postqueue -p"
    I am pasting only a part of it:
    Code:
    54E0FF74EE     4635 Sat Nov  1 18:44:55  MAILER-DAEMON
    (host mail.citydeals.com[216.139.236.252] said: 450 <[email protected]>: Recipient address rejected: User unknown in local recipient table (in reply to RCPT TO command))
                                             [email protected]
    
    5BA52F736C     4465 Sun Nov  2 14:59:34  MAILER-DAEMON
               (connect to asu.ugatu.ac.ru[193.233.146.234]: Connection timed out)
                                             [email protected]
    
    0B6FEF74A1     3713 Fri Oct 31 19:15:46  MAILER-DAEMON
    (Host or domain name not found. Name service error for name=wmle.com type=MX: Host not found, try again)
                                             [email protected]
    
    F2474F7671     4649 Tue Oct 28 22:55:15  MAILER-DAEMON
    (host mail.arcor-ip.de[145.253.2.14] said: 450 <[email protected]>: Recipient address rejected: undeliverable address: host 145.253.2.10[145.253.2.10] said: 550 RCPT TO:<[email protected]> User unknown (in reply to RCPT TO command) (in reply to RCPT TO command))
                                             [email protected]
    
    9ABB3F7318     3811 Thu Oct 30 04:55:46  MAILER-DAEMON
       (connect to mail.airtimepublishing.com[69.36.12.104]: Connection timed out)
                                             [email protected]
    
    D9A29F74B4    11611 Thu Oct 30 14:25:54  MAILER-DAEMON
                  (connect to pinkponk.com[213.229.249.143]: Connection timed out)
                                             [email protected]
     
    Last edited: Nov 2, 2008
  6. falko

    falko Super Moderator ISPConfig Developer

    What's the output of
    Code:
    postqueue -p | grep D021BF7376
    ?
     
  7. jancici

    jancici New Member

    I did allready try that
    output is empty

    and I did check syslog just now, finding that message again
    Code:
    Nov  3 16:15:13 postfix/smtpd[3303]: 3BBF5F74E6: client=proxy.nspbb.sk[194.160.223.2]
    Nov  3 16:15:13 postfix/bounce[6173]: fatal: open file trace 3BBF5F74E6: Permission denied
    Nov  3 16:15:14  postfix/master[22370]: warning: process /usr/lib/postfix/bounce pid 6173 exit status 1
    Nov  3 16:15:14  postfix/master[22370]: warning: /usr/lib/postfix/bounce: bad command startup -- throttling
    Nov  3 16:15:14  postfix/cleanup[6172]: warning: premature end-of-input on private/trace socket while reading input attribute
    name
    Nov  3 16:15:14  postfix/cleanup[6172]: warning: 3BBF5F74E6: trace service failure
    Nov  3 16:15:14  postfix/cleanup[6172]: warning: 3BBF5F74E6: trace logfile update error
    and then done this
    Code:
    postqueue -p |grep 3BBF5F74E6
    and output is empty
     
  8. falko

    falko Super Moderator ISPConfig Developer

    Hm, I'm not sure what's happening... :(
     

Share This Page