Pls Help - Problem installing OpenVZ with Debian Etch.

Discussion in 'HOWTO-Related Questions' started by joelee, Jan 13, 2007.

  1. joelee

    joelee New Member

    I am following this How-To: http://www.howtoforge.com/debian_etch_openvz

    To getting OpenVZ installed on Debian Etch. I am getting the error below after
    entering command:

    make-kpkg --append_to_version=-1-openvz --added_patches=openvz --revision=1 kernel_image

    Below is the Error output and as you can see it complains about GCC command not found? Below is the error output:

    * some of the repeated output has been Truncated *

    Code:
    debian:/usr/src/linux-source-2.6.18# make-kpkg --append_to_version=-1-openvz --added_patches=openvz --revision=1 kernel_image
    
    exec make -f /usr/share/kernel-package/ruleset/minimal.mk debian DEBIAN_REVISION=1  APPEND_TO_VERSION=-1-openvz  KPKG_SELECTED_PATCHES="openvz"
    [B]sh: gcc: command not found[/B]
    dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation)
    sh: gcc: command not found
    dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation)
    sh: gcc: command not found
    dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation)
    sh: gcc: command not found
    
    dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation)
    ====== making target minimal_debian [new prereqs: ]======
    This is kernel package version .
    test -d debian || mkdir debian
    test ! -e stamp-building || rm -f stamp-building
    test -f debian/control || sed         -e 's/=V/2.6.18-1-openvz/g'        \
                    -e 's/=D/1/g'         -e 's/=A/i386/g'  \
                    -e 's/=SA//g'   -e 's/=L/ /g' \
                    -e 's/=I//g'                                    \
                    -e 's/=CV/2.6/g'                       \
                    -e 's/=M/Unknown Kernel Package Maintainer <unknown@unconfigured.in.etc.kernel-pkg.conf>/g'                        \
                    -e 's/=ST/linux/g'      -e 's/=B/i386/g'    \
                             /usr/share/kernel-package/Control > debian/control
    test -f debian/changelog ||  sed -e 's/=V/2.6.18-1-openvz/g'             \
                -e 's/=D/1/g'        -e 's/=A/i386/g'       \
                -e 's/=ST/linux/g'     -e 's/=B/i386/g'         \
                -e 's/=M/Unknown Kernel Package Maintainer <unknown@unconfigured.in.etc.kernel-pkg.conf>/g'                            \
                 /usr/share/kernel-package/changelog > debian/changelog
    install -p -m 755 /usr/share/kernel-package/rules debian/rules
    for file in ChangeLog  Control  Control.bin86 config templates.in rules; do                                      \
                cp -f  /usr/share/kernel-package/$file ./debian/;                               \
            done
    for dir  in Config docs examples ruleset scripts pkg po;  do                                      \
              cp -af /usr/share/kernel-package/$dir  ./debian/;                                 \
            done
    test -d ./debian/stamps || mkdir debian/stamps
    exec debian/rules  DEBIAN_REVISION=1  APPEND_TO_VERSION=-1-openvz  KPKG_SELECTED_PATCHES="openvz"  kernel_image
    sh: gcc: command not found
    dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation)
    sh: gcc: command not found
    dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation)
    sh: gcc: command not found
    ====== making target CONFIG-common [new prereqs: testdir]======
    
    ====== making target debian/stamp-conf [new prereqs: ]======
    # work around idiocy in recent kernel versions
    test ! -e scripts/package/builddeb || \
                mv -f scripts/package/builddeb scripts/package/builddeb.kpkg-dist
    test ! -e scripts/package/Makefile || \
                (mv -f scripts/package/Makefile scripts/package/Makefile.kpkg-dist && \
                   (echo "# Dummy file "; echo "help:") >  scripts/package/Makefile)
    test -d debian || mkdir ./debian
    test ! -e stamp-building || rm -f stamp-building
    test ! -f ./debian || test -f stamp-debian || test -f debian/official || \
                   (rm -rf ./debian && mkdir ./debian)
    test ! -f applied_patches || rm -f applied_patches
    for patch in /usr/src/kernel-patches/all/apply/openvz ; do            \
              if test -x  $patch; then                    \
                  if $patch; then                         \
                      echo "Patch $patch processed fine"; \
                      echo "$patch" >> applied_patches;   \
                  else                                     \
                       echo "Patch $patch  failed.";      \
                       echo "Hit return to Continue";      \
                       read ans;                           \
                  fi;                                      \
              fi;                                          \
            done
    START applying openvz patch (OpenVZ kernel patch for virtual server support)
    Testing whether "OpenVZ kernel patch for virtual server support" patch for 2.6.18 applies (dry run):
    6 out of 30 hunks FAILED -- saving rejects to file net/ipv4/netfilter/ip_tables.c.rej
    1 out of 8 hunks FAILED -- saving rejects to file net/ipv6/udp.c.rej
    "OpenVZ kernel patch for virtual server support" patch for 2.6.18 does not apply cleanly
    Patch /usr/src/kernel-patches/all/apply/openvz  failed.
    Hit return to Continue
    make: *** wait: No child processes.  Stop.
    make: *** Waiting for unfinished jobs....
    make: *** wait: No child processes.  Stop.

    Then I tryed to install gcc with apt-get install gcc and still getting the errors.
    I've attached a text file of the errors in hope someone can help!


    Would really appreciate any help! I am trying to get a good install done quickly!

    PS: I think this how2 is good BUT think somewhere it is confusing or missing a step or so that is causing this error.

    Joe
     

    Attached Files:

  2. till

    till Super Moderator Howtoforge Staff HowtoForge Supporter ISPConfig Developer

    What is the output of:

    which gcc
     
  3. joelee

    joelee New Member

    Till, here's the output of GCC... Note: I just ran a new install - The output below is based on new fresh new install Debian Etch.

    Code:
    debian:~# which gcc
    debian:~#
    It looks like gcc is not installed as part of the normal debian etch installation. Also, I did a apt-update as well - still same thing.
    joe
     
    Last edited: Jan 14, 2007
  4. till

    till Super Moderator Howtoforge Staff HowtoForge Supporter ISPConfig Developer

    Please run:

    apt-get install gcc cpp g++ bison flex
     

Share This Page