perfect-server-centos-5.3-x86_64-ispconfig-3

Discussion in 'HOWTO-Related Questions' started by idsinc, Apr 13, 2010.

  1. idsinc

    idsinc New Member

    Location:

    HTML:
    http://www.howtoforge.net/perfect-server-centos-5.3-x86_64-ispconfig-3-p4
    I have inserted my comments in blue below:
    -------------------------------------------------------------------------
    Trouble area from page 4:

    Now (still in /tmp) we can build courier-authlib:

    sudo rpmbuild -ta courier-authlib-0.62.2.tar.bz2
    before typing this command, it is in [[email protected] tmp]$
    after I enter the command, it asks for a password:
    I enter the password for compileuser, and the response is:

    "compileuser is not in the sudoer file. This incident will be reported. You have new mail in /var/spool/mail/root"

    When I type ls -l at [[email protected] tmp]$ i find the listing below, but I dont find it at [[email protected] x86_64]$

    After the build process, the rpm packages can be found in $HOME/rpm/RPMS/x86_64 ($HOME/rpm/RPMS/i386 if you are on an i386 system):

    cd $HOME/rpm/RPMS/x86_64

    The command

    ls -l

    shows you the available rpm packages:

    [[email protected] x86_64]$ ls -l I do not get this result.
    total 608
    -rw-r--r-- 1 root root 139745 May 25 14:52 courier-authlib-0.62.2-1.x86_64.rpm
    -rw-r--r-- 1 root root 328419 May 25 14:52 courier-authlib-debuginfo-0.62.2-1.x86_64.rpm
    -rw-r--r-- 1 root root 35322 May 25 14:52 courier-authlib-devel-0.62.2-1.x86_64.rpm
    -rw-r--r-- 1 root root 18310 May 25 14:52 courier-authlib-ldap-0.62.2-1.x86_64.rpm
    -rw-r--r-- 1 root root 14501 May 25 14:52 courier-authlib-mysql-0.62.2-1.x86_64.rpm
    -rw-r--r-- 1 root root 13714 May 25 14:52 courier-authlib-pgsql-0.62.2-1.x86_64.rpm
    -rw-r--r-- 1 root root 8358 May 25 14:52 courier-authlib-pipe-0.62.2-1.x86_64.rpm
    -rw-r--r-- 1 root root 35287 May 25 14:52 courier-authlib-userdb-0.62.2-1.x86_64.rpm
    [[email protected] x86_64]$
    ------------------------------------------------------------------------------------------
    what am I missing?
     
  2. Ghostdare

    Ghostdare Member

    Did you follow the exact steps by adding "compileuser" to your sistem and adding him to sudoers with "visudo"? Maybee you are not so familiar with vi and changes to sudoers file are not changed at all.
     
  3. idsinc

    idsinc New Member

    oh... I think I entered vi sudo instead of visudo... thanx much
     
  4. idsinc

    idsinc New Member

    Still on page 4..

    11 Apply Quota Patch To Postfix
    We have to get the Postfix source rpm, patch it with the quota patch, build a new Postfix rpm package and install it.

    cd /usr/src

    HTML:
    wget http://ftp-stud.fht-esslingen.de/pub/Mirrors/centos/5.3/os/SRPMS/postfix-2.3.3-2.1.el5_2.src.rpm
    rpm -ivh postfix-2.3.3-2.1.el5_2.src.rpm

    when I type this in, my response is

    Resolving ftp-stud.fht-esslinen.de 192.143.116.10
    Connectiing to ftp-stud.fht-esslinen.de |192.143.116.10|:80 connected
    HTTP request sent, awaiting response... 404 Not Found
    2010-04-13 15:35:19 ERROR 404 Not Found


    I tried a different place and got:

    HTML:
    wget http://mirrors.racspace.com/pub/CentOS/5.3/os/SRPMS/postfix-2.3.3-2.1.el5_2.src.rpm
    rpm -ivh postfix-2.3.3-2.1.el5_2.src.rpm

    Resolving mirror.rackspace.com 72.4.123.180
    Connectiing to mirror.rackspace.com |72.4.123.180|:80 connected
    HTTP request sent, awaiting response... 404 Not Found
    2010-04-13 15:54:40 ERROR 404 Not Found


    What does this message mean? Thanx again...
     
    Last edited: Apr 13, 2010
  5. Ghostdare

    Ghostdare Member

  6. idsinc

    idsinc New Member


    That worked perfectly... thank you much!
     
  7. idsinc

    idsinc New Member

    New error, still page 4:

    rpmbuild - ba postfix.spec

    error: line 150: Bad arg to %patch -p: %package pflogsumm
     
  8. Ghostdare

    Ghostdare Member

    Please check again the "postfix.spec". Go to line 150 and tell me exactly what is written there. (maybe you modified by mistake that line)

    Q: When you work on the server are you using puTTY? Because if you enter by hand all this im sure that you have some typo problem (via SSH you can copy/paste very easy - i recommand that).

    I see that you reply on this thread very slowly - i think that we are on different time zone.
     
  9. idsinc

    idsinc New Member

    line 150:

    %package pflogsumm

    I added only:

    MYSQL 1

    Patch0 postfix-2.3.3-vda.patch

    %patch0 -pl -b .vda

    I'm pretty new at this, and I don't know what puTTY is.. :(

    so far, my biggest typo was vi sudo... I made a freudain assumption..lol.

    PS.. I'm in Minnesota
     
    Last edited: Apr 15, 2010
  10. Ghostdare

    Ghostdare Member

    PuTTY is a SSH client - contect to the server to work as in terminal or command line.

    Recomandation: before you do something like that try to work with the tutorial in a virtual machie - to see if it works or not.

    In my opinion try to make your server in a Debian ... it's recomended and tested by the ISPConfig creators.

    I think that you can ignore that error, you don't need that file. Just "cd /usr/src/redhat/RPMS/x86_64" (assuming that you have a 64 machine)
    then "ls -l" and if you have there "postfix-2.3.3-2.1.x86_64.rpm" I think that you can muv on to the next (Pick the Postfix package and install it like this: rpm -ivh postfix-2.3.3-2.1.x86_64.rpm)
     
    Last edited: Apr 15, 2010
  11. idsinc

    idsinc New Member

    terminal output:

    [[email protected] x86_64]# ls -l
    total 608
    -rw-r--r-- 1 root root 139691 Apr 13 14:47 courier-authlib-0.62.2-1.x86_64.rpm
    -rw-r--r-- 1 root root 328337 Apr 13 14:47 courier-authlib-debuginfo-0.62.2-1.x86_64.rpm
    -rw-r--r-- 1 root root 35316 Apr 13 14:47 courier-authlib-devel-0.62.2-1.x86_64.rpm
    -rw-r--r-- 1 root root 18302 Apr 13 14:47 courier-authlib-ldap-0.62.2-1.x86_64.rpm
    -rw-r--r-- 1 root root 14498 Apr 13 14:47 courier-authlib-mysql-0.62.2-1.x86_64.rpm
    -rw-r--r-- 1 root root 13706 Apr 13 14:47 courier-authlib-pgsql-0.62.2-1.x86_64.rpm
    -rw-r--r-- 1 root root 8359 Apr 13 14:47 courier-authlib-pipe-0.62.2-1.x86_64.rpm
    -rw-r--r-- 1 root root 35282 Apr 13 14:47 courier-authlib-userdb-0.62.2-1.x86_64.rpm
    [[email protected] x86_64]#



    So that means no postifx file...??
    See post #1... now I get these files, but no postfix files.
     
    Last edited: Apr 16, 2010
  12. Ghostdare

    Ghostdare Member

    I think you are in a wrong place. I think that you are in "$HOME/rpm/RPMS/x86_64", and you must be in "/usr/src/redhat/RPMS/x86_64".


    Just follow the 11 Apply Quota Patch To Postfix (i thought that you are to the point to apply the postfix pach) or my mistake?

    You should really learn to use putty - if you whant to learn something about it search the web about it or use this link http://www.electrictoolbox.com/article/applications/ssh-putty/
     
    Last edited: Apr 16, 2010
  13. idsinc

    idsinc New Member

    Still Page 4: A little bit ago, I entered the command:

    HTML:
    wget http://vda.sourceforge.net/VD/postfix-2.3.3.vda.patch.gz
    I got a temporary unvailable about 5 times over a period of about 20 min. It finally came through. I see the file in the /usr/src/redhat/SOURCES directory.

    Then I entered:


    gunzip postfix-2.3.3.vda.patch.gz

    it now says: gunzip postfix-2.3.3.vda.patch.gz: not in gzip format

    I'm assuming changes were being made, when I initially tried to retrieve the file.


    Please advise. :)
     
  14. Ghostdare

    Ghostdare Member

    That message is this way because the archive is broken... i think that you sould searc an alternative link for that pach. I will search myself for that.... and i will came back with a link.

    the link in the tutorial (from sourceforge is down - you have a lot of bad luck regarding that) :confused:

    LE: As it says on SourceForge.... they have a planned downtime on their servers.

    LEE: Here's a link http://web.onda.com.br/nadal/postfix/VDA/postfix-2.3.3-vda.patch.gz

    Hope it will work for you
     
    Last edited: Apr 16, 2010
  15. idsinc

    idsinc New Member

    Actually, I found one a little different...

    HTML:
    http://web.onda.com.br/nadal/postfix/VDA/postfix-2.3.3-vda.patch.gz
    You know I'll be back...
     
  16. idsinc

    idsinc New Member

    So far here is the printout of the directories and what is in them:

    [[email protected] src]# ls -l
    total 2824
    drwxr-xr-x 3 root root 4096 Apr 13 15:12 debug
    drwxr-xr-x 4 root root 4096 Apr 12 09:50 kernels
    -rw-r--r-- 1 root root 2865338 Aug 15 2008 postfix-2.3.3-2.1.el5_2.src.rpm
    drwxr-xr-x 7 root root 4096 Sep 3 2009 redhat
    [[email protected] src]# cd /usr/src/redhat
    [[email protected] redhat]# ls -l
    total 40
    drwxr-xr-x 3 root root 4096 Apr 13 14:46 BUILD
    drwxr-xr-x 4 root root 4096 Sep 3 2009 RPMS
    drwxr-xr-x 2 root root 4096 Apr 16 14:39 SOURCES
    drwxr-xr-x 2 root root 4096 Apr 16 14:41 SPECS
    drwxr-xr-x 2 root root 4096 Apr 13 14:47 SRPMS
    [[email protected] redhat]# cd /usr/src/redhat/RPMS
    [[email protected] RPMS]# ls -l
    total 16
    drwxr-xr-x 2 root root 4096 Sep 3 2009 noarch
    drwxr-xr-x 2 root root 4096 Apr 13 14:47 x86_64
    [[email protected] RPMS]# cd /usr/src/redhat/SOURCES
    [[email protected] SOURCES]# ls -l
    total 2852
    -rw-r--r-- 1 root root 43588 Jun 25 2004 pflogsumm-1.1.0.tar.gz
    -rw-r--r-- 1 root root 2346 Sep 9 2004 postfix-2.1.1-config.patch
    -rw-r--r-- 1 root root 420 Sep 9 2004 postfix-2.1.1-obsolete.patch
    -rw-r--r-- 1 root root 422 Oct 18 2004 postfix-2.1.5-aliases.patch
    -rw-r--r-- 1 root root 2353 Nov 11 2005 postfix-2.2.5-cyrus.patch
    -rw-r--r-- 1 root root 2777045 Sep 1 2006 postfix-2.3.3.tar.gz
    -rw-r--r-- 1 root root 30460 Oct 17 2006 postfix-2.3.3-vda.patch
    -rw-r--r-- 1 root root 1057 Sep 9 2004 postfix-alternatives.patch
    -rw-r--r-- 1 root root 2244 Aug 11 2008 postfix-CVE-2008-2936.patch
    -rw-r--r-- 1 root root 2404 Nov 11 2005 postfix-etc-init.d-postfix
    -rw-r--r-- 1 root root 1367 Apr 20 2005 postfix-large-fs.patch
    -rw-r--r-- 1 root root 72 Oct 7 2005 postfix-pam.conf
    -rw-r--r-- 1 root root 26 Sep 9 2004 postfix-sasl.conf
    -rw-r--r-- 1 root root 19725 Sep 9 2004 README-Postfix-SASL-RedHat.txt
    [[email protected] SOURCES]# cd /usr/src/redhat/SPECS
    [[email protected] SPECS]# ls -l
    total 2836
    -rw-r--r-- 1 root root 2865338 Apr 16 13:14 postfix-2.3.3-2.1.el5_2.src.rpm
    -rw-r--r-- 1 root root 30930 Apr 16 14:41 postfix.spec
    [[email protected] SPECS]# cd /usr/src/redhat/SRPMS
    [[email protected] SRPMS]# ls -l
    total 2192
    -rw-r--r-- 1 root root 2237490 Apr 13 14:47 courier-authlib-0.62.2-1.src.rpm
    [[email protected] SRPMS]#
     
  17. Ghostdare

    Ghostdare Member

    It seems to be right files.... now follow the tutorial from "vi postfix.spec".

    Let me know how it's works!
     
  18. idsinc

    idsinc New Member

    The reason I display the list is that none of the following commands work:

    rpmbuild -ba postfix.spec
    rpm -ivh postfix-2.3.3-2.1.x86_64.rpm


    This directory is still the same:

    [[email protected] x86_64]# ls -l
    total 608
    -rw-r--r-- 1 root root 139691 Apr 13 14:47 courier-authlib-0.62.2-1.x86_64.rpm
    -rw-r--r-- 1 root root 328337 Apr 13 14:47 courier-authlib-debuginfo-0.62.2-1.x86_64.rpm
    -rw-r--r-- 1 root root 35316 Apr 13 14:47 courier-authlib-devel-0.62.2-1.x86_64.rpm
    -rw-r--r-- 1 root root 18302 Apr 13 14:47 courier-authlib-ldap-0.62.2-1.x86_64.rpm
    -rw-r--r-- 1 root root 14498 Apr 13 14:47 courier-authlib-mysql-0.62.2-1.x86_64.rpm
    -rw-r--r-- 1 root root 13706 Apr 13 14:47 courier-authlib-pgsql-0.62.2-1.x86_64.rpm
    -rw-r--r-- 1 root root 8359 Apr 13 14:47 courier-authlib-pipe-0.62.2-1.x86_64.rpm
    -rw-r--r-- 1 root root 35282 Apr 13 14:47 courier-authlib-userdb-0.62.2-1.x86_64.rpm
    [[email protected] x86_64]#

    On my command line, entered the following:
    [[email protected] SPECS]# vi postfix.spec

    These lines were entered in their respective places:

    MYSQL 1

    Patch0: postfix-2.3.3-vda.patch

    %patch0 -pl -b .vda

    :wq saved document

    then tried both the commands (1)rpmbuild and (2)rpm indicated in the last post, and both fail.

    Commands:
    (1) rpmbuild -ba postfix.spec
    (2) rpm -ivh postfix-2.3.3-2.1.x86_64.rpm


    (1) error: line 150: Bad arg to %patch -p: %package fplogsumm
    (2) error: open postfix-2.3.3.x86_64.rpm failed: no such file or directory
     
    Last edited: Apr 16, 2010
  19. Ghostdare

    Ghostdare Member

    The files listed by you are located in "HOME/rpm/RPMS/x86_64"..... right?

    In the tutorial postfix files are located in "/usr/src/redhat/RPMS/x86_64".

    If are not, i think that you spuld start from the beginning (all server installation i mean).
    maybe another linux - as i sayd before "Debian" works flowless - mine it is.
     
    Last edited: Apr 17, 2010
  20. idsinc

    idsinc New Member

    I checked the compileuser directories, and there is something slightly different there, but not the "postfix-2.3.3-2.1.x86_64.rpm" file I'm looking for.

    The directory listing I last gave is from "/usr/src/redhat/RPMS/x86_64", so I'll start the process all over again, and see what happens.

    I will have to do some research on the Debain option... the reason I was working with CentOS, is because Cpanel works with it, once it's installed properly. I don't know that Debain does. ??
     

Share This Page