Outlook does not Authenticates

Discussion in 'Server Operation' started by aberrio, Oct 16, 2007.

  1. aberrio

    aberrio New Member

    Using Outlook Express or MSO and does not authenticates using POP, works fine on IMAP. When disable "outgoing server req. authentication" I get relay error, any suggestion, I am using Postfix, mysql dovecot

    Another question any other CP, I am unable to use ISP Config, does not support my configuration, DNS, mail server and HTTP server on different boxes

    Best regards


    AL
     
  2. ebal

    ebal New Member

    have you set up the dovecot with imap ?
    can you put here the conf ?

    have you check the iptables ?
    can you telnet at imap port 143 of tcp/ip ?
    have you see at the logs of dovecot any messages for authentication failures?
     
  3. aberrio

    aberrio New Member

    here is my log

    Oct 16 16:30:07 mail postfix/smtpd[31002]: disconnect from unknown[12.173.5.11]
    Oct 16 16:30:09 mail postfix/smtpd[31002]: connect from unknown[12.173.5.11]
    Oct 16 16:30:12 mail postfix/smtpd[31002]: warning: SASL authentication problem: unable to open Berkeley db /etc/sasldb2: Permission denied
    Oct 16 16:30:12 mail postfix/smtpd[31002]: warning: SASL authentication problem: unable to open Berkeley db /etc/sasldb2: Permission denied
    Oct 16 16:30:12 mail postfix/smtpd[31002]: warning: unknown[12.173.5.11]: SASL LOGIN authentication failed: authentication failure
    Oct 16 16:30:12 mail postfix/smtpd[31002]: lost connection after AUTH from unknown[12.173.5.11]
    Oct 16 16:30:12 mail postfix/smtpd[31002]: disconnect from unknown[12.173.5.11]
    Oct 16 16:30:13 mail postfix/smtpd[31002]: connect from unknown[12.173.5.11]
    Oct 16 16:30:16 mail postfix/smtpd[31002]: warning: SASL authentication problem: unable to open Berkeley db /etc/sasldb2: Permission denied
    Oct 16 16:30:16 mail postfix/smtpd[31002]: warning: SASL authentication problem: unable to open Berkeley db /etc/sasldb2: Permission denied
    Oct 16 16:30:16 mail postfix/smtpd[31002]: warning: unknown[12.173.5.11]: SASL LOGIN authentication failed: authentication failure
    Oct 16 16:30:17 mail postfix/smtpd[31002]: lost connection after AUTH from unknown[12.173.5.11]
    Oct 16 16:30:17 mail postfix/smtpd[31002]: disconnect from unknown[12.173.5.11]

    here is my main.cf

    # --------------- local settings ------------------
    myhostname = mail.tchosting.net
    mydomain = tchosting.net
    inet_interfaces = localhost, $myhostname
    alias_maps =
    alias_database =
    relay_domains = mysql:$config_directory/mysql_relay_domains_maps.cf
    smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
    debug_peer_level = 2
    debugger_command =
    PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
    xxgdb $daemon_directory/$process_name $process_id & sleep 5
    sendmail_path = /usr/sbin/sendmail
    newaliases_path = /usr/bin/newaliases
    command_directory = /usr/sbin
    daemon_directory = /usr/lib/postfix
    mailq_path = /usr/bin/mailq
    setgid_group = maildrop
    mynetworks_style = subnet
    mynetworks = 127.0.0.0/8, 192.168.1.0/24
    mydestination = localhost, $myhostname
    unknown_local_recipient_reject_code = 550
    address_verify_map = btree:/var/spool/postfix/address_verify
    inet_protocols = all
    biff = no
    content_filter = smtp-amavis:[127.0.0.1]:10024
    # ---------------------- VIRTUAL DOMAINS START ----------------------
    virtual_mailbox_domains = mysql:$config_directory/mysql_virtual_domains_maps.cf
    virtual_mailbox_base = /var/vmail
    virtual_mailbox_maps = mysql:$config_directory/mysql_virtual_mailbox_maps.cf
    virtual_alias_maps = mysql:$config_directory/mysql_virtual_alias_maps.cf
    virtual_minimum_uid = 150
    virtual_uid_maps = static:150
    virtual_gid_maps = static:8
    virtual_transport = virtual
    dovecot_destination_recipient_limit = 1
    # ---------------------- VIRTUAL DOMAINS END ----------------------
    # ---------------------- ADDITIONAL FOR QUOTA SUPPORT -------------
    virtual_create_maildirsize = yes
    virtual_mailbox_extended = yes
    virtual_mailbox_limit_maps = mysql:/etc/postfix/mysql_virtual_mailbox_limit_maps.cf
    virtual_mailbox_limit_override = yes
    virtual_maildir_limit_message = Sorry, the user's maildir has overdrawn his diskspace quota, please try again later.
    virtual_overquota_bounce = yes
    # ---------------------- ADDITIONAL FOR QUOTA SUPPORT END -----
    # ---------------------- SASL PART START ----------------------
    smtpd_sasl_auth_enable = yes
    smtpd_sasl_local_domain =
    #smtpd_sasl_local_domain = $myhostname
    smtpd_sasl_security_options = noanonymous
    broken_sasl_auth_clients = yes
    #smtp_sasl_password_maps = mysql:$config_directory/mysql_virtual_mailbox_maps.cf
    smtpd_sasl_path = private/auth
    # ---------------------- SASL PART END ----------------------
    # ---------------------- TLS PART START ----------------------
    smtp_use_tls = yes
    smtp_tls_cert_file = /etc/postfix/ssl/smtpd.crt
    smtp_tls_key_file = /etc/postfix/ssl/smtpd.key
    smtp_tls_CAfile = /etc/postfix/ssl/cacert.pem
    smtp_tls_session_cache_database = btree:/var/spool/postfix/smtp_tls_session_cache
    smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt
    smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key
    smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem
    smtpd_tls_session_cache_database = btree:/var/spool/postfix/smtpd_tls_session_cache
    smtpd_use_tls = yes
    smtpd_tls_security_level = may
    smtpd_tls_received_header = no
    smtpd_tls_ask_ccert = no
    smtpd_tls_loglevel = 0
    tls_random_source = dev:/dev/urandom
    smtpd_tls_auth_only = no
    smtp_tls_note_starttls_offer = yes
    smtpd_tls_session_cache_timeout = 3600s
    # ---------------------- TLS PART END ----------------------
    smtpd_helo_required = yes
    disable_vrfy_command = yes
    non_fqdn_reject_code = 450
    invalid_hostname_reject_code = 450
    maps_rbl_reject_code = 450
    smtpd_recipient_restrictions =
    permit_mynetworks
    permit_tls_all_clientcerts
    permit_sasl_authenticated
    reject_unauth_destination
    reject_invalid_helo_hostname
    warn_if_reject reject_non_fqdn_helo_hostname
    warn_if_reject reject_unknown_helo_hostname
    warn_if_reject reject_unknown_client
    reject_non_fqdn_sender
    reject_non_fqdn_recipient
    reject_unknown_sender_domain
    reject_unknown_recipient_domain
    warn_if_reject reject_unverified_sender
    reject_unverified_recipient
    reject_rbl_client cbl.abuseat.org
    reject_rbl_client list.dsbl.org
    reject_rbl_client opm.blitzed.org
    reject_rbl_client sbl.spamhaus.org
    reject_rbl_client bl.spamcop.net
    reject_rbl_client dnsbl.sorbs.net=127.0.0.2
    reject_rbl_client dnsbl.sorbs.net=127.0.0.3
    reject_rbl_client dnsbl.sorbs.net=127.0.0.4
    reject_rbl_client dnsbl.sorbs.net=127.0.0.5
    reject_rbl_client dnsbl.sorbs.net=127.0.0.7
    reject_rbl_client dnsbl.sorbs.net=127.0.0.9
    reject_rbl_client dnsbl.sorbs.net=127.0.0.11
    reject_rbl_client dnsbl.sorbs.net=127.0.0.12
    warn_if_reject reject_rhsbl_sender dsn.rfc-ignorant.org
    warn_if_reject reject_rhsbl_sender abuse.rfc-ignorant.org
    warn_if_reject reject_rhsbl_sender whois.rfc-ignorant.org
    warn_if_reject reject_rhsbl_sender bogusmx.rfc-ignorant.org
    warn_if_reject reject_rhsbl_sender postmaster.rfc-ignorant.org
    permit
    smtpd_data_restrictions =
    reject_unauth_pipelining,
    reject_multi_recipient_bounce,
    permit

    here is dovecot.conf

    base_dir = /var/run/dovecot/
    protocols = imap pop3 imaps pop3s
    listen =
    log_timestamp = "%b %d %H:%M:%S "
    syslog_facility = mail
    ssl_listen =
    ssl_disable = no
    ssl_parameters_regenerate = 168
    verbose_ssl = no
    mail_location = maildir:/var/vmail/%d/%n
    mail_extra_groups = mail
    mail_debug = no
    first_valid_uid = 150
    last_valid_uid = 150
    maildir_copy_with_hardlinks = yes

    protocol imap {
    login_executable = /usr/lib/dovecot/imap-login
    mail_executable = /usr/lib/dovecot/imap
    imap_max_line_length = 65536
    #mail_plugins = quota imap_quota
    #mail_plugin_dir = /usr/lib/dovecot/imap
    #login_greeting_capability = no
    #imap_capability =
    imap_client_workarounds = outlook-idle delay-newmail
    }

    protocol pop3 {
    login_executable = /usr/lib/dovecot/pop3-login
    mail_executable = /usr/lib/dovecot/pop3
    #pop3_no_flag_updates = no
    #pop3_enable_last = no
    #pop3_reuse_xuidl = no
    #pop3_lock_session = no
    pop3_uidl_format = %08Xv%08Xu
    #pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s
    #mail_plugins = quota imap_quota
    #mail_plugin_dir = /usr/lib/dovecot/pop3
    pop3_client_workarounds = outlook-no-nuls oe-ns-eoh
    }
    protocol lda {
    postmaster_address = postmaster@tchosting.net
    #hostname =
    mail_plugins = quota
    #mail_plugin_dir = /usr/lib/dovecot/lda
    sendmail_path = /usr/lib/sendmail
    auth_socket_path = /var/run/dovecot/auth-master
    }

    auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@
    auth_verbose = no
    auth_debug = no

    auth default {
    mechanisms = plain digest-md5 cram-md5
    passdb pam {
    }
    passdb sql {
    args = /etc/dovecot/dovecot-sql.conf
    }

    userdb passwd {
    }
    userdb sql {
    args = /etc/dovecot/dovecot-sql.conf
    }
    user = nobody
    socket listen {
    master {
    path = /var/run/dovecot/auth-master
    mode = 0600
    user = vmail
    group = mail
    }
    client {
    path = /var/run/dovecot/auth-client
    mode = 0660
    user = postfix
    group = mail
    }
    }
    }

    dict {
    #quota = mysql:/etc/dovecot-dict-quota.conf
    }

    plugin {
    quota = maildir:storage=10240:messages=1000
    acl = vfile:/etc/dovecot-acls
    #convert_mail = mbox:%h/mail
    trash = /etc/dovecot-trash.conf
    }

    yes IP tables re ok verifi ports 143 25 110 are avail, the problem is sending email

    best regards

    Al
     
  4. falko

    falko Super Moderator ISPConfig Developer

    Do you have this problem when you send (SMTP) an email or when you try to fetch (POP3) an email?

    What are the outputs of
    Code:
    iptables -L
    and
    Code:
    netstat -tap
    ?
     
  5. aberrio

    aberrio New Member

    Hi , this only happen when I configure my email client software as POP, I am able to receive mail but not send SMTP req authetication but unable to authenticates, but when I configure the wmail client as IMAP protocol I am able to send and receive. here is my iptable looks like this
    mail:~ # iptables -L
    Chain INPUT (policy DROP)
    target prot opt source destination
    ACCEPT 0 -- anywhere anywhere
    ACCEPT 0 -- anywhere anywhere state RELATED,ESTABLISHED
    input_ext 0 -- anywhere anywhere
    LOG 0 -- anywhere anywhere limit: avg 3/min burst 5 LOG level warning tcp-options ip-options prefix `SFW2-IN-ILL-TARGET '
    DROP 0 -- anywhere anywhere
    Chain FORWARD (policy DROP)
    target prot opt source destination
    LOG 0 -- anywhere anywhere limit: avg 3/min burst 5 LOG level warning tcp-options ip-options prefix `SFW2-FWD-ILL-ROUTING '
    Chain OUTPUT (policy ACCEPT)
    target prot opt source destination
    ACCEPT 0 -- anywhere anywhere
    ACCEPT 0 -- anywhere anywhere state NEW,RELATED,ESTABLISHED
    LOG 0 -- anywhere anywhere limit: avg 3/min burst 5 LOG level warning tcp-options ip-options prefix `SFW2-OUT-ERROR '
    Chain forward_ext (0 references)
    target prot opt source destination
    Chain input_ext (1 references)
    target prot opt source destination
    DROP 0 -- anywhere anywhere PKTTYPE = broadcast
    ACCEPT icmp -- anywhere anywhere icmp source-quench
    ACCEPT icmp -- anywhere anywhere icmp echo-request
    ACCEPT icmp -- anywhere anywhere state RELATED,ESTABLISHED icmp echo-reply
    ACCEPT icmp -- anywhere anywhere state RELATED,ESTABLISHED icmp destination-unreachable
    ACCEPT icmp -- anywhere anywhere state RELATED,ESTABLISHED icmp time-exceeded
    ACCEPT icmp -- anywhere anywhere state RELATED,ESTABLISHED icmp parameter-problem
    ACCEPT icmp -- anywhere anywhere state RELATED,ESTABLISHED icmp timestamp-reply
    ACCEPT icmp -- anywhere anywhere state RELATED,ESTABLISHED icmp address-mask-reply
    ACCEPT icmp -- anywhere anywhere state RELATED,ESTABLISHED icmp protocol-unreachable
    ACCEPT icmp -- anywhere anywhere state RELATED,ESTABLISHED icmp redirect
    LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp dpt:ndmp flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC-TCP '
    ACCEPT tcp -- anywhere anywhere tcp dpt:ndmp
    LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp dpt:domain flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC-TCP '
    ACCEPT tcp -- anywhere anywhere tcp dpt:domain
    LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp dpt:http flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC-TCP '
    ACCEPT tcp -- anywhere anywhere tcp dpt:http
    LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp dpt:https flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC-TCP '
    ACCEPT tcp -- anywhere anywhere tcp dpt:https
    LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp dpt:imap flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC-TCP '
    ACCEPT tcp -- anywhere anywhere tcp dpt:imap
    LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp dpt:imaps flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC-TCP '
    ACCEPT tcp -- anywhere anywhere tcp dpt:imaps
    LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp dpt:mysql flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC-TCP '
    ACCEPT tcp -- anywhere anywhere tcp dpt:mysql
    LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp dptPop3 flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC-TCP '
    ACCEPT tcp -- anywhere anywhere tcp dptPop3
    LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp dptPop3s flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC-TCP '
    ACCEPT tcp -- anywhere anywhere tcp dptPop3s
    LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp dpt:smtp flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC-TCP '
    ACCEPT tcp -- anywhere anywhere tcp dpt:smtp
    LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp dpt:ssh flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-ACC-TCP '
    ACCEPT tcp -- anywhere anywhere tcp dpt:ssh
    ACCEPT udp -- anywhere anywhere udp dpt:domain
    reject_func tcp -- anywhere anywhere tcp dpt:ident state NEW
    LOG 0 -- anywhere anywhere limit: avg 3/min burst 5 PKTTYPE = multicast LOG level warning tcp-options ip-options prefix `SFW2-INext-DROP-DEFLT '
    DROP 0 -- anywhere anywhere PKTTYPE = multicast
    LOG tcp -- anywhere anywhere limit: avg 3/min burst 5 tcp flags:FIN,SYN,RST,ACK/SYN LOG level warning tcp-options ip-options prefix `SFW2-INext-DROP-DEFLT '
    LOG icmp -- anywhere anywhere limit: avg 3/min burst 5 LOG level warning tcp-options ip-options prefix `SFW2-INext-DROP-DEFLT '
    LOG udp -- anywhere anywhere limit: avg 3/min burst 5 LOG level warning tcp-options ip-options prefix `SFW2-INext-DROP-DEFLT '
    LOG 0 -- anywhere anywhere limit: avg 3/min burst 5 state INVALID LOG level warning tcp-options ip-options prefix `SFW2-INext-DROP-DEFLT-INV '
    DROP 0 -- anywhere anywhere
    Chain reject_func (1 references)
    target prot opt source destination
    REJECT tcp -- anywhere anywhere reject-with tcp-reset
    REJECT udp -- anywhere anywhere reject-with icmp-port-unreachable
    REJECT 0 -- anywhere anywhere reject-with icmp-proto-unreachable
    mail:~ #
    and my netstat looks like
    mail:~ # netstat -tap
    Active Internet connections (servers and established)
    Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
    tcp 0 0 *:imaps *:* LISTEN 12258/dovecot
    tcp 0 0 *Pop3s *:* LISTEN 12258/dovecot
    tcp 0 0 localhost:10024 *:* LISTEN 3255/amavisd (maste
    tcp 0 0 localhost:10025 *:* LISTEN 30909/master
    tcp 0 0 *:mysql *:* LISTEN 3015/mysqld
    tcp 0 0 *Pop3 *:* LISTEN 12258/dovecot
    tcp 0 0 localhost:dyna-access *:* LISTEN 2578/clamd
    tcp 0 0 *:imap *:* LISTEN 12258/dovecot
    tcp 0 0 *:sunrpc *:* LISTEN 2477/portmap
    tcp 0 0 *:ndmp *:* LISTEN 21769/perl
    tcp 0 0 localhost:novell-zen *:* LISTEN 2959/zmd
    tcp 0 0 mail.tchosting.n:domain *:* LISTEN 32237/named
    tcp 0 0 localhost:domain *:* LISTEN 32237/named
    tcp 0 0 localhost:ipp *:* LISTEN 2989/cupsd
    tcp 0 0 localhost:953 *:* LISTEN 32237/named
    tcp 0 0 localhost:smtp *:* LISTEN 30909/master
    tcp 0 0 mail.tchosting.net:smtp *:* LISTEN 30909/master
    tcp 0 0 *:www-http *:* LISTEN 3248/httpd2-prefork
    tcp 0 0 *:domain *:* LISTEN 32237/named
    tcp 0 0 *:ssh *:* LISTEN 3093/sshd
    tcp 0 0 localhost:ipp *:* LISTEN 2989/cupsd
    tcp 0 0 localhost:953 *:* LISTEN 32237/named
    tcp 0 0 localhost:smtp *:* LISTEN 30909/master
    tcp 0 0 *:https *:* LISTEN 3248/httpd2-prefork
    tcp 0 3260 mail.tchosting.net:ssh 12.173.5.11%30864:42448 ESTABLISHED 6125/0
    mail:~ #

    best regards
    AL
     
  6. chuckl

    chuckl New Member

    Don't you think it would be a good idea to pay attention to, and fix the error messages from your log file?
    i.e.

    Oct 16 16:30:09 mail postfix/smtpd[31002]: connect from unknown[12.173.5.11]
    Oct 16 16:30:12 mail postfix/smtpd[31002]: warning: SASL authentication problem: unable to open Berkeley db /etc/sasldb2: Permission denied
    Oct 16 16:30:12 mail postfix/smtpd[31002]: warning: SASL authentication problem: unable to open Berkeley db /etc/sasldb2: Permission denied
    Oct 16 16:30:12 mail postfix/smtpd[31002]: warning: unknown[12.173.5.11]: SASL LOGIN authentication failed: authentication failure
     
  7. aberrio

    aberrio New Member

    I try to do that chuckl, that the reason is there for somebody else to help me, I am aware that the error is that, do you have a solution chuckl?
     
  8. chuckl

    chuckl New Member

    Could be many things.
    For starters, which user owns /etc/sasldb2 and what permissions are set?

    Are you running postfix chrooted? If so, maybe its looking in /var/spool/postfix/etc and there should be a copy of sasldb2 there?
    Even if it's not using the file SASL expects it to be available and usable.

    You have this line commented out in main.cf

    #smtp_sasl_password_maps = mysql:$config_directory/mysql_virtual_mailbox_maps.cf

    Is that where you want SASL to find the auth data? Otherwise you have no map or password file specified, and it's going to use the SASL default, which is giving you an error.
     
  9. aberrio

    aberrio New Member

    I had verify all that, my question was ..configuring my client_outlook Express or MSO) as IMAP protocol I am able to send email, but if I configure a POP protocol I am no able to send email getting previous error

    I am not using any other ssl program,I am only using dovecot' ssl builtin.

    any other suggestion.

    Best regrads

    AL
     
  10. falko

    falko Super Moderator ISPConfig Developer

    Is it possible that your mail server is configured for something like pop-before-smtp or imap-before-smtp instead of SMTP-AUTH?
    Can you post the output of
    Code:
    telnet localhost 25
    and then
    Code:
    ehlo localhost
    ?
     
  11. aberrio

    aberrio New Member

    here is my telnet

    mail:~ # telnet localhost 25
    Trying 127.0.0.1...
    Connected to localhost.
    Escape character is '^]'.
    220 mail.tchosting.net ESMTP Postfix (2.3.2)
    ehlo localhost
    250-mail.tchosting.net
    250-PIPELINING
    250-SIZE 10240000
    250-ETRN
    250-STARTTLS
    250-AUTH LOGIN
    250-AUTH=LOGIN
    250-ENHANCEDSTATUSCODES
    250-8BITMIME
    250 DSN

    best regards

    AL
     
  12. falko

    falko Super Moderator ISPConfig Developer

    I see 250-AUTH LOGIN, but 250-AUTH LOGIN PLAIN would be better. Which distribution do you use?
     
  13. aberrio

    aberrio New Member

    I am using SUSE 10.2
     
  14. falko

    falko Super Moderator ISPConfig Developer

    What's the output of
    Code:
    updatedb
    locate smtpd.conf
    ?
    If you find an smtpd.conf, what's in it?
     
  15. aberrio

    aberrio New Member

    This is the output

    mail:~ # updatedb
    locate smtpd.conf
    mail:~ # locate smtpd.conf
    /etc/postfix/ssl/smtpd.conf
    /etc/sasl2/smtpd.conf
    /usr/share/logwatch/default.conf/services/qmail-smtpd.conf
    mail:~ #
     
  16. falko

    falko Super Moderator ISPConfig Developer

    What's in /etc/postfix/ssl/smtpd.conf and /etc/sasl2/smtpd.conf?
     
  17. aberrio

    aberrio New Member

    hi

    any suggestion?


    Best regards
     
  18. falko

    falko Super Moderator ISPConfig Developer

    What about my previous question?
     
  19. aberrio

    aberrio New Member

    in /etc/postfix/ssl/smtpd.conf

    pwcheck_method: saslauthd
    mech_list: plain login

    /etc/sasl2/smtpd.conf

    pwcheck_method: saslauthd
    mech_list: plain login
     
  20. falko

    falko Super Moderator ISPConfig Developer

    Looks ok... :confused:
    What's the output of
    Code:
    ls -l /etc/sysconfig
    ?
     

Share This Page