No receive emails using The Perfect Server - Debian 10 (Buster) with Apache, BIND, Dovecot, PureFTPD

Discussion in 'Installation/Configuration' started by Enrique García, Jun 29, 2020.

  1. Enrique García

    Enrique García Member HowtoForge Supporter

    Hi, after a new intall using The Perfect Server - Debian 10 (Buster) with Apache, BIND, Dovecot, PureFTPD and ISPConfig 3.1.
    I can send mail but no receive.
    My /var/log/mail.log after sending and email from my gmail account
    Jun 28 22:05:51 www postfix/smtps/smtpd[17363]: disconnect from unknown[212.70.149.66] ehlo=1 auth=0/1 rset=1 commands=2/3
    Jun 28 22:06:52 www postfix/anvil[17368]: statistics: max connection rate 1/60s for (smtps:212.70.149.66) at Jun 28 21:57:22
    Jun 28 22:06:52 www postfix/anvil[17368]: statistics: max connection count 1 for (smtps:212.70.149.66) at Jun 28 21:57:22
    Jun 28 22:06:52 www postfix/anvil[17368]: statistics: max cache size 1 at Jun 28 21:57:22
    Jun 28 22:07:18 www postfix/smtps/smtpd[17363]: connect from unknown[212.70.149.66]
    Jun 28 22:08:15 www postfix/smtps/smtpd[17363]: warning: unknown[212.70.149.66]: SASL LOGIN authentication failed: UGFzc3dvcmQ6
    Jun 28 22:08:23 www postfix/smtps/smtpd[17363]: lost connection after AUTH from unknown[212.70.149.66]
    Jun 28 22:08:23 www postfix/smtps/smtpd[17363]: disconnect from unknown[212.70.149.66] ehlo=1 auth=0/1 rset=1 commands=2/3
    Jun 28 22:09:50 www postfix/smtps/smtpd[17363]: connect from unknown[212.70.149.66]
    Jun 28 22:10:02 www dovecot: imap-login: Disconnected (no auth attempts in 0 secs): user=<>, rip=::1, lip=::1, secured, session=<jZR4ji+pXL8$
    Jun 28 22:10:02 www dovecot: pop3-login: Disconnected (no auth attempts in 0 secs): user=<>, rip=::1, lip=::1, secured, session=<36J4ji+p3oE$

    I attach printscreen of records.
    Please advice
    Regards,
     

    Attached Files:

  2. till

    till Super Moderator Staff Member ISPConfig Developer

    Login to webmail on the server with a local account of the server, then send an email within the webmail client to the account that you used for webmail login and check a bit later if it arrived in the webmail account. If this local mail roundtrip works, then the email setup is ok and the issue must be external like a blocked mail port. If not, post the mail.log file and postfix master.cf file.
     
  3. Taleman

    Taleman Well-Known Member HowtoForge Supporter

  4. Enrique García

    Enrique García Member HowtoForge Supporter

    I install the roundcube, but I can't access display "ERROR 404 - Not Found"
    That's another problem I don't know why there's no roundcube.
     
  5. Jesse Norell

    Jesse Norell ISPConfig Developer Staff Member ISPConfig Developer

    Go back through the Perfect Server tutorial you used and check the roundcube steps.
     
  6. Enrique García

    Enrique García Member HowtoForge Supporter

    Thanks, forget to put the alias. Now is working.
    But doing the test from Till, display "Error SMTP (-1): Conection to server failed." but with thunderbird no problem sending, only receiving.
    :(
    Now, following the "How to Install an Email Server with ISPConfig on Debian 10" as advice Taleman, I don't have a swap file, do yo have some tutorial for Debian 10?
    Regards,
     
  7. till

    till Super Moderator Staff Member ISPConfig Developer

  8. Enrique García

    Enrique García Member HowtoForge Supporter

    Results;
    ##### SERVER #####
    IP-address (as per hostname): ***.***.***.***
    [WARN] could not determine server's ip address by ifconfig
    [INFO] OS version is Debian GNU/Linux 10 (buster)

    [INFO] ISPConfig is installed.

    ##### ISPCONFIG #####
    ISPConfig version is 3.1.15p3


    ##### VERSION CHECK #####

    [INFO] php (cli) version is 7.3.14-1~deb10u1

    ##### PORT CHECK #####

    [WARN] Port 25 (SMTP server) seems NOT to be listening
    [WARN] Port 22 (SSH server) seems NOT to be listening
    [WARN] Port 25 (SMTP server) seems NOT to be listening

    ##### MAIL SERVER CHECK #####

    [WARN] I found no "smtp" entry in your postfix master.cf

    ##### RUNNING SERVER PROCESSES #####

    [INFO] I found the following web server(s):
    Apache 2 (PID 4104)
    [WARN] I could not determine which mail server is running.
    [INFO] I found the following pop3 server(s):
    Dovecot (PID 17307)
    [INFO] I found the following imap server(s):
    Dovecot (PID 17307)
    [INFO] I found the following ftp server(s):
    PureFTP (PID 17362)

    ##### LISTENING PORTS #####
    (only ()
    Local (Address)
    [localhost]:953 (18971/named)
    [anywhere]:993 (17307/dovecot)
    [anywhere]:995 (17307/dovecot)
    [localhost]:10023 (28706/postgrey)
    [localhost]:10024 (3862/amavisd-new)
    [localhost]:10025 (17293/master)
    [localhost]:10026 (3862/amavisd-new)
    [localhost]:10027 (17293/master)
    [anywhere]:587 (17293/master)
    [localhost]:11211 (13268/memcached)
    [anywhere]:110 (17307/dovecot)
    [anywhere]:3022 (466/sshd)
    [anywhere]:143 (17307/dovecot)
    [anywhere]:465 (5105/smtpd)
    [anywhere]:21 (17362/pure-ftpd)
    ***.***.***.***:53 (18971/named)
    [localhost]:53 (18971/named)
    *:*:*:*::*:953 (18971/named)
    *:*:*:*::*:443 (4104/apache2)
    *:*:*:*::*:993 (17307/dovecot)
    *:*:*:*::*:995 (17307/dovecot)
    *:*:*:*::*:10023 (28706/postgrey)
    *:*:*:*::*:10024 (3862/amavisd-new)
    *:*:*:*::*:10026 (3862/amavisd-new)
    *:*:*:*::*:3306 (18477/mysqld)
    *:*:*:*::*:587 (17293/master)
    [localhost]10 (17307/dovecot)
    *:*:*:*::*:3022 (466/sshd)
    [localhost]43 (17307/dovecot)
    *:*:*:*::*:8080 (4104/apache2)
    *:*:*:*::*:80 (4104/apache2)
    *:*:*:*::*:8081 (4104/apache2)
    *:*:*:*::*:465 (5105/smtpd)
    *:*:*:*::*:21 (17362/pure-ftpd)
    *:*:*:*::*:53 (18971/named)




    ##### IPTABLES #####
    Chain INPUT (policy ACCEPT)
    target prot opt source destination
    f2b-dovecot tcp -- [anywhere]/0 [anywhere]/0 multiport
    dports 110,995,143,993,587,465,4190
    f2b-postfix-sasl tcp -- [anywhere]/0 [anywhere]/0 multi
    port dports 25

    Chain FORWARD (policy ACCEPT)
    target prot opt source destination

    Chain OUTPUT (policy ACCEPT)
    target prot opt source destination

    Chain f2b-postfix-sasl (1 references)
    target prot opt source destination
    REJECT all -- ***.***.***.*** [anywhere]/0 reject-with i
    cmp-port-unreachable
    RETURN all -- [anywhere]/0 [anywhere]/0

    Chain f2b-dovecot (1 references)
    target prot opt source destination
    RETURN all -- [anywhere]/0 [anywhere]/0
     
  9. till

    till Super Moderator Staff Member ISPConfig Developer

    Please post the content of the file /etc/postfix/master.cf
     
  10. Enrique García

    Enrique García Member HowtoForge Supporter

    #
    # Postfix master process configuration file. For details on the format
    # of the file, see the master(5) manual page (command: "man 5 master" or
    # on-line: http://www.postfix.org/master.5.html).
    #
    # Do not forget to execute "postfix reload" after editing this file.
    #
    # ==========================================================================
    # service type private unpriv chroot wakeup maxproc command + args
    # (yes) (yes) (no) (never) (100)
    # ==========================================================================
    #smtp inet n - y - - smtpd
    #smtp inet n - y - 1 postscreen
    #smtpd pass - - y - - smtpd
    #dnsblog unix - - y - 0 dnsblog
    #tlsproxy unix - - y - 0 tlsproxy
    submission inet n - - - - smtpd
    #submission inet n - y - - smtpd
    -o syslog_name=postfix/submission
    -o smtpd_tls_security_level=encrypt
    -o smtpd_sasl_auth_enable=yes
    # -o smtpd_tls_auth_only=yes
    # -o smtpd_reject_unlisted_recipient=no
    -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    # -o smtpd_client_restrictions=$mua_client_restrictions
    # -o smtpd_helo_restrictions=$mua_helo_restrictions
    # -o smtpd_sender_restrictions=$mua_sender_restrictions
    # -o smtpd_recipient_restrictions=
    # -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
    # -o milter_macro_daemon_name=ORIGINATING
    smtps inet n - - - - smtpd
    #smtps inet n - y - - smtpd
    -o syslog_name=postfix/smtps
    -o smtpd_tls_wrappermode=yes
    -o smtpd_sasl_auth_enable=yes
    # -o smtpd_reject_unlisted_recipient=no
    -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    # -o smtpd_client_restrictions=$mua_client_restrictions
    # -o smtpd_helo_restrictions=$mua_helo_restrictions
    # -o smtpd_sender_restrictions=$mua_sender_restrictions
    # -o smtpd_recipient_restrictions=
    # -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
    # -o milter_macro_daemon_name=ORIGINATING
    smtps inet n - - - - smtpd
    #smtps inet n - y - - smtpd
    -o syslog_name=postfix/smtps
    -o smtpd_tls_wrappermode=yes
    -o smtpd_sasl_auth_enable=yes
    # -o smtpd_reject_unlisted_recipient=no
    -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    # -o smtpd_client_restrictions=$mua_client_restrictions
    # -o smtpd_helo_restrictions=$mua_helo_restrictions
    # -o smtpd_sender_restrictions=$mua_sender_restrictions
    # -o smtpd_recipient_restrictions=
    # -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
    # -o milter_macro_daemon_name=ORIGINATING
    #628 inet n - y - - qmqpd
    pickup unix n - y 60 1 pickup
    cleanup unix n - y - 0 cleanup
    qmgr unix n - n 300 1 qmgr
    #qmgr unix n - n 300 1 oqmgr
    tlsmgr unix - - y 1000? 1 tlsmgr
    rewrite unix - - y - - trivial-rewrite
    bounce unix - - y - 0 bounce
    defer unix - - y - 0 bounce
    trace unix - - y - 0 bounce
    verify unix - - y - 1 verify
    flush unix n - y 1000? 0 flush
    proxymap unix - - n - - proxymap
    proxywrite unix - - n - 1 proxymap
    smtp unix - - y - - smtp
    relay unix - - y - - smtp
    -o syslog_name=postfix/$service_name
    # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
    showq unix n - y - - showq
    error unix - - y - - error
    retry unix - - y - - error
    discard unix - - y - - discard
    local unix - n n - - local
    virtual unix - n n - - virtual
    lmtp unix - - y - - lmtp
    anvil unix - - y - 1 anvil
    scache unix - - y - 1 scache
    postlog unix-dgram n - n - 1 postlogd
    #
    # ====================================================================
    # Interfaces to non-Postfix software. Be sure to examine the manual
    # pages of the non-Postfix software to find out what options it wants.
    #
    # Many of the following services use the Postfix pipe(8) delivery
    # agent. See the pipe(8) man page for information about ${recipient}
    # and other message envelope options.
    # ====================================================================
    #
    # maildrop. See the Postfix MAILDROP_README file for details.
    # Also specify in main.cf: maildrop_destination_recipient_limit=1
    #
    maildrop unix - n n - - pipe
    flags=DRhu user=vmail argv=/usr/bin/maildrop -d vmail ${extension} ${recipien$
    #
    # ====================================================================
    #
    # Recent Cyrus versions can use the existing "lmtp" master.cf entry.
    #
    # Specify in cyrus.conf:
    # lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
    #
    #
    # Specify in main.cf one or more of the following:
    # mailbox_transport = lmtp:inet:localhost
    # virtual_transport = lmtp:inet:localhost
    #
    # ====================================================================
    #
    # Cyrus 2.1.5 (Amos Gouaux)
    # Also specify in main.cf: cyrus_destination_recipient_limit=1
    #
    #cyrus unix - n n - - pipe
    # user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
    #
    # ====================================================================
    # Old example of delivery via Cyrus.
    #
    #old-cyrus unix - n n - - pipe
    # flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
    #
    # ====================================================================
    #
    # See the Postfix UUCP_README file for configuration details.
    #
    uucp unix - n n - - pipe
    flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
    #
    # Other external delivery methods.
    #
    ifmail unix - n n - - pipe
    flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
    bsmtp unix - n n - - pipe
    flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
    scalemail-backend unix - n n - 2 pipe
    flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop}$
    mailman unix - n n - - pipe
    flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
    ${nexthop} ${user}

    dovecot unix - n n - - pipe
    flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${u$

    amavis unix - - - - 2 smtp
    -o smtp_data_done_timeout=1200
    -o smtp_send_xforward_command=yes
    -o smtp_bind_address=


    127.0.0.1:10025 inet n - n - - smtpd
    -o content_filter=
    -o local_recipient_maps=
    -o relay_recipient_maps=
    -o smtpd_restriction_classes=
    -o smtpd_client_restrictions=
    -o smtpd_helo_restrictions=
    -o smtpd_sender_restrictions=
    -o smtpd_recipient_restrictions=permit_mynetworks,reject
    -o mynetworks=127.0.0.0/8
    -o strict_rfc821_envelopes=yes
    -o receive_override_options=no_unknown_recipient_checks,no_header_body_$
    -o smtp_send_xforward_command=yes
    -o disable_dns_lookups=yes


    127.0.0.1:10027 inet n - n - - smtpd
    -o content_filter=
    -o local_recipient_maps=
    -o relay_recipient_maps=
    -o smtpd_restriction_classes=
    -o smtpd_client_restrictions=
    -o smtpd_helo_restrictions=
    -o smtpd_sender_restrictions=
    -o smtpd_recipient_restrictions=permit_mynetworks,reject
    -o mynetworks=127.0.0.0/8
    -o strict_rfc821_envelopes=yes
    -o receive_override_options=no_unknown_recipient_checks,no_header_body_$
    -o smtp_send_xforward_command=yes
    -o milter_default_action=accept
    -o milter_macro_daemon_name=ORIGINATING
    -o disable_dns_lookups=yes
     
  11. till

    till Super Moderator Staff Member ISPConfig Developer

    remove the # in front of the line:

    #smtp inet n - y - - smtpd

    and restart postfix.
     
  12. Enrique García

    Enrique García Member HowtoForge Supporter

    Display this:

    [email protected]:~# postfix stop && postfix start
    postfix/postfix-script: stopping the Postfix mail system
    postfix/postfix-script: warning: symlink leaves directory: /etc/postfix/./smtpd. cert
    postfix/postfix-script: warning: symlink leaves directory: /etc/postfix/./smtpd. key
    postfix/postfix-script: warning: symlink leaves directory: /etc/postfix/./makede fs.out
    postfix/postfix-script: starting the Postfix mail system

    But now is receiving :)
    Thanks,
     
  13. till

    till Super Moderator Staff Member ISPConfig Developer

    The symlink warnings are ok.
     

Share This Page