Mail Transport Unavailable After Update and Disabling Amavis

Discussion in 'Installation/Configuration' started by CTS_AE, Nov 14, 2016.

  1. CTS_AE

    CTS_AE New Member

    I keep reviving mail transport unavailable when I check my logs and run postqueue -p
    All my messages are getting stuck trying to route out it seems.

    If I run postsuper -r ALL the queue will process

    I have previously disabled spamassassin / clamav / amavis and I believe I've taken the necesary steps to disable amavis again after the update.

    I recently updated and ran into this issue. I tried to follow the forum post from last time this happened: https://www.howtoforge.com/community/threads/mail-isnt-sending-or-forwarding-anymore.72647/

    But I'm not having any luck. Here's my current configuration (hopefully my copy/paste gets everything.,.,):
    I feel like some of it has become dirty over time, is there a way to reset the config and start fresh with it? - That could be a last effort if nothing else works.

    main.cf
    Code:
    # See /usr/share/postfix/main.cf.dist for a commented, more complete version
    
    
    # Debian specific:  Specifying a file name will cause the first
    # line of that file to be used as the name.  The Debian default
    # is /etc/mailname.
    #myorigin = /etc/mailname
    
    smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu)
    biff = no
    
    # appending .domain is the MUA's job.
    append_dot_mydomain = no
    
    # Uncomment the next line to generate "delayed mail" warnings
    #delay_warning_time = 4h
    
    readme_directory = /usr/share/doc/postfix
    
    # TLS parameters
    smtpd_tls_cert_file = /etc/postfix/smtpd.cert
    smtpd_tls_key_file = /etc/postfix/smtpd.key
    smtpd_use_tls = yes
    smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
    smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache
    
    # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for
    # information on enabling SSL in the smtp client.
    
    smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_un$
    myhostname = codyswartz.us
    alias_maps = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases
    alias_database = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases
    myorigin = /etc/mailname
    mydestination = localhost, localhost.localdomain
    relayhost =
    mynetworks = 127.0.0.0/8 [::1]/128
    mailbox_size_limit = 0
    recipient_delimiter = +
    inet_interfaces = all
    html_directory = /usr/share/doc/postfix/html
    virtual_alias_domains =
    virtual_alias_maps = hash:/var/lib/mailman/data/virtual-mailman, proxy:mysql:/e$
    virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf
    virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf
    virtual_mailbox_base = /var/vmail
    virtual_uid_maps = mysql:/etc/postfix/mysql-virtual_uids.cf
    virtual_gid_maps = mysql:/etc/postfix/mysql-virtual_gids.cf
    inet_protocols = all
    smtpd_sasl_auth_enable = yes
    broken_sasl_auth_clients = yes
    smtpd_sasl_authenticated_header = yes
    smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, re$
    smtpd_tls_security_level = may
    transport_maps = hash:/var/lib/mailman/data/transport-mailman, proxy:mysql:/etc$
    relay_domains = mysql:/etc/postfix/mysql-virtual_relaydomains.cf
    relay_recipient_maps = mysql:/etc/postfix/mysql-virtual_relayrecipientmaps.cf
    proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $vir$
    smtpd_sender_restrictions = check_sender_access regexp:/etc/postfix/tag_as_orig$
    smtpd_client_restrictions = check_client_access mysql:/etc/postfix/mysql-virtua$
    smtpd_client_message_rate_limit = 100
    maildrop_destination_concurrency_limit = 1
    maildrop_destination_recipient_limit = 1
    virtual_transport = dovecot
    header_checks = regexp:/etc/postfix/header_checks
    mime_header_checks = regexp:/etc/postfix/mime_header_checks
    nested_header_checks = regexp:/etc/postfix/nested_header_checks
    body_checks = regexp:/etc/postfix/body_checks
    owner_request_special = no
    smtp_tls_security_level = may
    dovecot_destination_recipient_limit = 1
    smtpd_sasl_type = dovecot
    smtpd_sasl_path = private/auth
    #content_filter = amavis:[127.0.0.1]:10024
    #receive_override_options = no_address_mappings
    message_size_limit = 0
    smtpd_tls_mandatory_protocols = !SSLv2, !SSLv3
    smtpd_tls_protocols = !SSLv2,!SSLv3
    smtp_tls_protocols = !SSLv2,!SSLv3
    #content_filter =
    #receive_override_options = no_address_mappings
    sender_bcc_maps = proxy:mysql:/etc/postfix/mysql-virtual_outgoing_bcc.cf
    smtpd_restriction_classes = greylisting
    greylisting = check_policy_service inet:127.0.0.1:10023
    smtpd_sender_login_maps = proxy:mysql:/etc/postfix/mysql-virtual_sender_login_m$
    smtpd_helo_required = yes
    smtpd_helo_restrictions = permit_sasl_authenticated, permit_mynetworks, check_h$
    smtpd_tls_exclude_ciphers = RC4, aNULL
    smtp_tls_exclude_ciphers = RC4, aNULL
    
    
     
  2. CTS_AE

    CTS_AE New Member

    master.cf
    Code:
    #
    # Postfix master process configuration file.  For details on the format
    # of the file, see the master(5) manual page (command: "man 5 master" or
    # on-line: http://www.postfix.org/master.5.html).
    #
    # Do not forget to execute "postfix reload" after editing this file.
    #
    # ==========================================================================
    # service type  private unpriv  chroot  wakeup  maxproc command + args
    #               (yes)   (yes)   (yes)   (never) (100)
    # ==========================================================================
    smtp      inet  n       -       -       -       -       smtpd
    #smtp      inet  n       -       -       -       1       postscreen
    #smtpd     pass  -       -       -       -       -       smtpd
    #dnsblog   unix  -       -       -       -       0       dnsblog
    #tlsproxy  unix  -       -       -       -       0       tlsproxy
    submission inet n       -       -       -       -       smtpd
      -o syslog_name=postfix/submission
      -o smtpd_tls_security_level=encrypt
      -o smtpd_sasl_auth_enable=yes
      -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    #  -o smtpd_reject_unlisted_recipient=no
    #  -o smtpd_client_restrictions=$mua_client_restrictions
    #  -o smtpd_helo_restrictions=$mua_helo_restrictions
    #  -o smtpd_sender_restrictions=$mua_sender_restrictions
    #  -o smtpd_recipient_restrictions=
    #  -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
    #  -o milter_macro_daemon_name=ORIGINATING
    smtps     inet  n       -       -       -       -       smtpd
      -o syslog_name=postfix/smtps
      -o smtpd_tls_wrappermode=yes
      -o smtpd_sasl_auth_enable=yes
      -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    #  -o smtpd_reject_unlisted_recipient=no
    #  -o smtpd_client_restrictions=$mua_client_restrictions
    #  -o smtpd_helo_restrictions=$mua_helo_restrictions
    #  -o smtpd_sender_restrictions=$mua_sender_restrictions
    #  -o smtpd_recipient_restrictions=
    #  -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
    #  -o milter_macro_daemon_name=ORIGINATING
    #628       inet  n       -       -       -       -       qmqpd
    pickup    unix  n       -       -       60      1       pickup
    cleanup   unix  n       -       -       -       0       cleanup
    qmgr      unix  n       -       n       300     1       qmgr
    #qmgr     unix  n       -       n       300     1       oqmgr
    tlsmgr    unix  -       -       -       1000?   1       tlsmgr
    rewrite   unix  -       -       -       -       -       trivial-rewrite
    bounce    unix  -       -       -       -       0       bounce
    defer     unix  -       -       -       -       0       bounce
    trace     unix  -       -       -       -       0       bounce
    verify    unix  -       -       -       -       1       verify
    flush     unix  n       -       -       1000?   0       flush
    proxymap  unix  -       -       n       -       -       proxymap
    proxywrite unix -       -       n       -       1       proxymap
    smtp      unix  -       -       -       -       -       smtp
    relay     unix  -       -       -       -       -       smtp
    #       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
    showq     unix  n       -       -       -       -       showq
    error     unix  -       -       -       -       -       error
    retry     unix  -       -       -       -       -       error
    discard   unix  -       -       -       -       -       discard
    local     unix  -       n       n       -       -       local
    virtual   unix  -       n       n       -       -       virtual
    lmtp      unix  -       -       -       -       -       lmtp
    anvil     unix  -       -       -       -       1       anvil
    scache    unix  -       -       -       -       1       scache
    #
    # ====================================================================
    # Interfaces to non-Postfix software. Be sure to examine the manual
    # pages of the non-Postfix software to find out what options it wants.
    #
    # Many of the following services use the Postfix pipe(8) delivery
    # agent.  See the pipe(8) man page for information about ${recipient}
    # and other message envelope options.
    # ====================================================================
    #
    # maildrop. See the Postfix MAILDROP_README file for details.
    # Also specify in main.cf: maildrop_destination_recipient_limit=1
    #
    maildrop  unix  -       n       n       -       -       pipe
      flags=DRhu user=vmail argv=/usr/bin/maildrop -d vmail ${extension} ${recipient} ${user} ${nexthop} ${sender}
    #
    # ====================================================================
    #
    # Recent Cyrus versions can use the existing "lmtp" master.cf entry.
    #
    # Specify in cyrus.conf:
    #   lmtp    cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
    #
    # Specify in main.cf one or more of the following:
    #  mailbox_transport = lmtp:inet:localhost
    #  virtual_transport = lmtp:inet:localhost
    #
    # ====================================================================
    #
    # Cyrus 2.1.5 (Amos Gouaux)
    # Also specify in main.cf: cyrus_destination_recipient_limit=1
    #
    #cyrus     unix  -       n       n       -       -       pipe
    #  user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
    #
    # ====================================================================
    # Old example of delivery via Cyrus.
    #
    #old-cyrus unix  -       n       n       -       -       pipe
    #  flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
    #
    # ====================================================================
    #
    # See the Postfix UUCP_README file for configuration details.
    #
    uucp      unix  -       n       n       -       -       pipe
      flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
    #
    # Other external delivery methods.
    #
    ifmail    unix  -       n       n       -       -       pipe
      flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
    bsmtp     unix  -       n       n       -       -       pipe
      flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
    scalemail-backend unix  -       n       n       -       2       pipe
      flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
    mailman   unix  -       n       n       -       -       pipe
      flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
      ${nexthop} ${user}
    
    dovecot   unix  -       n       n       -       -       pipe
      flags=DROhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${user}@${nexthop}
    #amavis unix - - - - 2 smtp
    #        -o smtp_data_done_timeout=1200
    #        -o smtp_send_xforward_command=yes
    
    #127.0.0.1:10025 inet n - - - - smtpd
    #        -o content_filter=
    #        -o local_recipient_maps=
    #        -o relay_recipient_maps=
    #        -o smtpd_restriction_classes=
    #        -o smtpd_client_restrictions=
    #        -o smtpd_helo_restrictions=
    #        -o smtpd_sender_restrictions=
    #        -o smtpd_recipient_restrictions=permit_mynetworks,reject
    #        -o mynetworks=127.0.0.0/8
    #        -o strict_rfc821_envelopes=yes
    #        -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks
    
    
    #amavis unix - - - - 2 smtp
    #        -o smtp_data_done_timeout=1200
    #        -o smtp_send_xforward_command=yes
    
    
    #127.0.0.1:10025 inet n - n - - smtpd
    #        -o content_filter=
    #        -o local_recipient_maps=
    #        -o relay_recipient_maps=
    #        -o smtpd_restriction_classes=
    #        -o smtpd_client_restrictions=
    #        -o smtpd_helo_restrictions=
    #        -o smtpd_sender_restrictions=
    #        -o smtpd_recipient_restrictions=permit_mynetworks,reject
    #        -o mynetworks=127.0.0.0/8
    #        -o strict_rfc821_envelopes=yes
    #        -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks
    #        -o smtp_send_xforward_command=yes
    #        -o disable_dns_lookups=yes
    
    
    #127.0.0.1:10027 inet n - n - - smtpd
    #        -o content_filter=
    #        -o local_recipient_maps=
    #        -o relay_recipient_maps=
    #        -o smtpd_restriction_classes=
    #        -o smtpd_client_restrictions=
    #        -o smtpd_helo_restrictions=
    #        -o smtpd_sender_restrictions=
    #        -o smtpd_recipient_restrictions=permit_mynetworks,reject
    #        -o mynetworks=127.0.0.0/8
    #        -o strict_rfc821_envelopes=yes
    #        -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks
    #        -o smtp_send_xforward_command=yes
    #        -o milter_default_action=accept
    #        -o milter_macro_daemon_name=ORIGINATING
    #        -o disable_dns_lookups=yes
    
    
    
     
  3. CTS_AE

    CTS_AE New Member

    mail log
    http://pastebin.com/YxyrxKFj

    Do I need to modify the tag_asforeign.re or tag_asoriginating.re files?
    I noticed they have /^/ FILTER amavis:[127.0.0.1]:10024 in them
     
  4. Jesse Norell

    Jesse Norell Active Member

    You can re-run the ispconfig updater and answer yes to reconfigure services, that will catch a lot of the config, though it will enable spamassassin/amavis as well. You are wanting to run without those? Or that's just one measure to try to troubleshoot the real problem? What transport is it referring to when it says 'transport unavailable', amavis?
     
  5. florian030

    florian030 ISPConfig Developer ISPConfig Developer

    if you disable amavis, you must remove the tag_as* entries from the main.cf.
     

Share This Page