Issues with Postfix, Courier, MySQL And SquirrelMail after server crash

Discussion in 'HOWTO-Related Questions' started by beno, May 30, 2010.

  1. beno

    beno New Member

    I'm an absolute newbie to unix so pls be patient ;)
    I have been assigned to try and make a Postfix mailsystem work again. What happened is that the server crashed (HDD damaged/replaced) the files were restored from backup. Of course postfix doesn't work anymore.
    I tried to follow the documentation the person who set this up initally also followed: http://www.howtoforge.com/virtual-users-domains-postfix-courier-mysql-squirrelmail-debian-lenny-p2 however with not much luck. Every time i had a problem or ecountered an error message I looked up google and got to the next step, up until the point where i can't get answers anymore from google.

    The problem now is that I cannot get into SquirrelMail (ERROR: Connection dropped by IMAP server) with any of the active accounts and the only error message I get from the mail.log is this:

    Code:
    May 30 23:08:37 srv1 imapd: Connection, ip=[::ffff:127.0.0.1]
    Let me know if you need more information or the content of any file and I'll answer as soon as I can as I'm trying to figure this out for 2 days now (the whole weekend) and don't seem to get to the end...

    Any help would be much appreciated! Thx a lot in advance!

    EDITED: almost forgot something: mailx delivers the message, telnet localhost 25 is answering ok too, can logont to mySQL fine, tables seem to be ok...

    EDITED2 (more info): Extract of my /etc/postfix/main.cf (I replaced the real domain names by mydomain.eu, myotherdomain.com, and mythird-domain.com, and the password by Pa55word everywhere below):

    Code:
    # See /usr/share/postfix/main.cf.dist for a commented, more complete version
    
    
    # Debian specific:  Specifying a file name will cause the first
    # line of that file to be used as the name.  The Debian default
    # is /etc/mailname.
    #myorigin = /etc/mailname
    
    smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU)
    biff = no
    
    # appending .domain is the MUA's job.
    append_dot_mydomain = no
    
    # Uncomment the next line to generate "delayed mail" warnings
    #delay_warning_time = 4h
    
    readme_directory = /usr/share/doc/postfix
    
    # TLS parameters
    smtpd_tls_cert_file = /etc/postfix/smtpd.cert
    smtpd_tls_key_file = /etc/postfix/smtpd.key
    smtpd_use_tls = yes
    smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
    smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache
    
    # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for
    # information on enabling SSL in the smtp client.
    
    myhostname = srv1.mydomain.eu
    alias_maps = hash:/etc/aliases
    alias_database = hash:/etc/aliases
    myorigin = /etc/mailname
    mydestination = srv1.mydomain.eu, myotherdomain.com, mythird-domain.com, localhost, localhost.localdomain
    #mydestination = srv1.mydomain.eu, localhost, localhost.localdomain
    relayhost = 
    mynetworks = 127.0.0.0/8
    mailbox_command = procmail -a "$EXTENSION"
    mailbox_size_limit = 0
    recipient_delimiter = +
    inet_interfaces = all
    html_directory = /usr/share/doc/postfix/html
    message_size_limit = 30720000
    virtual_alias_domains = 
    virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, mysql:/etc/postfix/mysql-virtual_email2email.cf
    virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf
    virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf
    virtual_mailbox_base = /home/vmail
    virtual_uid_maps = static:5000
    virtual_gid_maps = static:5000
    smtpd_sasl_auth_enable = yes
    broken_sasl_auth_clients = yes
    smtpd_sasl_authenticated_header = yes
    smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
    smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
    transport_maps = proxy:mysql:/etc/postfix/mysql-virtual_transports.cf
    virtual_create_maildirsize = yes
    virtual_maildir_extended = yes
    virtual_mailbox_limit_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailbox_limit_maps.cf
    virtual_mailbox_limit_override = yes
    virtual_maildir_limit_message = "The user you are trying to reach is over quota."
    virtual_overquota_bounce = yes
    proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $virtual_mailbox_limit_maps
    # Neu eingefuegt:
    #relay_domains = $mydestination
    Extract of my /etc/postfix/master.cf

    Code:
    #
    # Postfix master process configuration file.  For details on the format
    # of the file, see the master(5) manual page (command: "man 5 master").
    #
    # Do not forget to execute "postfix reload" after editing this file.
    #
    # ==========================================================================
    # service type  private unpriv  chroot  wakeup  maxproc command + args
    #               (yes)   (yes)   (yes)   (never) (100)
    # ==========================================================================
    smtp      inet  n       -       -       -       -       smtpd -v
    #submission inet n       -       -       -       -       smtpd
    #  -o smtpd_tls_security_level=encrypt
    
    #hier geändert wegen Nichtannahme von Mails:
       -o smtpd_sasl_auth_enable=yes
    
    
    #  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    #  -o milter_macro_daemon_name=ORIGINATING
    #smtps     inet  n       -       -       -       -       smtpd
    #  -o smtpd_tls_wrappermode=yes
    #  -o smtpd_sasl_auth_enable=yes
    #  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    #  -o milter_macro_daemon_name=ORIGINATING
    #628      inet  n       -       -       -       -       qmqpd
    pickup    fifo  n       -       -       60      1       pickup
    cleanup   unix  n       -       -       -       0       cleanup
    qmgr      fifo  n       -       n       300     1       qmgr
    #qmgr     fifo  n       -       -       300     1       oqmgr
    tlsmgr    unix  -       -       -       1000?   1       tlsmgr
    rewrite   unix  -       -       -       -       -       trivial-rewrite
    bounce    unix  -       -       -       -       0       bounce
    defer     unix  -       -       -       -       0       bounce
    trace     unix  -       -       -       -       0       bounce
    verify    unix  -       -       -       -       1       verify
    flush     unix  n       -       -       1000?   0       flush
    proxymap  unix  -       -       n       -       -       proxymap
    proxywrite unix -       -       n       -       1       proxymap
    smtp      unix  -       -       -       -       -       smtp
    # When relaying mail as backup MX, disable fallback_relay to avoid MX loops
    relay     unix  -       -       -       -       -       smtp
    	-o smtp_fallback_relay=
    #       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
    showq     unix  n       -       -       -       -       showq
    error     unix  -       -       -       -       -       error
    retry     unix  -       -       -       -       -       error
    discard   unix  -       -       -       -       -       discard
    local     unix  -       n       n       -       -       local
    virtual   unix  -       n       n       -       -       virtual
    lmtp      unix  -       -       -       -       -       lmtp
    anvil     unix  -       -       -       -       1       anvil
    scache    unix  -       -       -       -       1       scache
    #
    # ====================================================================
    # Interfaces to non-Postfix software. Be sure to examine the manual
    # pages of the non-Postfix software to find out what options it wants.
    #
    # Many of the following services use the Postfix pipe(8) delivery
    # agent.  See the pipe(8) man page for information about ${recipient}
    # and other message envelope options.
    # ====================================================================
    #
    # maildrop. See the Postfix MAILDROP_README file for details.
    # Also specify in main.cf: maildrop_destination_recipient_limit=1
    #
    maildrop  unix  -       n       n       -       -       pipe
      flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
    #
    # See the Postfix UUCP_README file for configuration details.
    #
    uucp      unix  -       n       n       -       -       pipe
      flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
    #
    # Other external delivery methods.
    #
    ifmail    unix  -       n       n       -       -       pipe
      flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
    bsmtp     unix  -       n       n       -       -       pipe
      flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
    scalemail-backend unix	-	n	n	-	2	pipe
      flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
    mailman   unix  -       n       n       -       -       pipe
      flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
      ${nexthop} ${user}
    
    ####################################
    #Neu angefügt:
    ####################################
    #127.0.0.1:10025 inet n - - - - smtpd
    ##-o content_filter=
    #-o local_recipient_maps=
    #-o relay_recipient_maps=
    #-o smtpd_restriction_classes=
    #-o smtpd_client_restrictions=
    #-o smtpd_helo_restrictions=
    #-o smtpd_sender_restrictions=
    #-o smtpd_recipient_restrictions=permit_mynetworks,reject
    #-o mynetworks=127.0.0.0/8
    #-o strict_rfc821_envelopes=yes
    #-o receive_override_options=no_unknown_recipient_checks,no_header_body_checks
    #-o smtpd_bind_address=127.0.0.1
    Extract of my /etc/postfix/sasl/smtpd.conf

    Code:
    pwcheck_method: saslauthd
    mech_list: plain login
    allow_plaintext: true
    auxprop_plugin: mysql
    sql_hostnames: 127.0.0.1
    sql_user: mail_admin
    sql_passwd: Pa55word
    sql_database: mail
    sql_select: select password from users where email = '%u'
    Extract of my /etc/courier/authmysqlrc

    Code:
    MYSQL_SERVER localhost
    MYSQL_USERNAME mail_admin
    MYSQL_PASSWORD Pa55word
    MYSQL_PORT 0
    MYSQL_DATABASE mail
    MYSQL_USER_TABLE users
    MYSQL_CRYPT_PWFIELD password
    #MYSQL_CLEAR_PWFIELD password
    MYSQL_UID_FIELD 5000
    MYSQL_GID_FIELD 5000
    MYSQL_LOGIN_FIELD email
    MYSQL_HOME_FIELD "/home/vmail"
    MYSQL_MAILDIR_FIELD CONCAT(SUBSTRING_INDEX(email,'@',-1),'/',SUBSTRING_INDEX(email,'@',1),'/')
    #MYSQL_NAME_FIELD
    MYSQL_QUOTA_FIELD quota
    And finally, extract of my /etc/mysql/my.cnf

    Code:
    #
    # The MySQL database server configuration file.
    #
    # You can copy this to one of:
    # - "/etc/mysql/my.cnf" to set global options,
    # - "~/.my.cnf" to set user-specific options.
    # 
    # One can use all long options that the program supports.
    # Run program with --help to get a list of available options and with
    # --print-defaults to see which it would actually understand and use.
    #
    # For explanations see
    # http://dev.mysql.com/doc/mysql/en/server-system-variables.html
    
    # This will be passed to all mysql clients
    # It has been reported that passwords should be enclosed with ticks/quotes
    # escpecially if they contain "#" chars...
    # Remember to edit /etc/mysql/debian.cnf when changing the socket location.
    [client]
    port		= 3306
    socket		= /var/run/mysqld/mysqld.sock
    
    # Here is entries for some specific programs
    # The following values assume you have at least 32M ram
    
    # This was formally known as [safe_mysqld]. Both versions are currently parsed.
    [mysqld_safe]
    socket		= /var/run/mysqld/mysqld.sock
    nice		= 0
    
    [mysqld]
    #
    # * Basic Settings
    #
    user		= mysql
    pid-file	= /var/run/mysqld/mysqld.pid
    socket		= /var/run/mysqld/mysqld.sock
    port		= 3306
    basedir		= /usr
    datadir		= /var/lib/mysql
    tmpdir		= /tmp
    language	= /usr/share/mysql/english
    skip-external-locking
    #
    # Instead of skip-networking the default is now to listen only on
    # localhost which is more compatible and is not less secure.
    bind-address		= 127.0.0.1
    #
    # * Fine Tuning
    #
    key_buffer		= 16M
    max_allowed_packet	= 16M
    thread_stack		= 128K
    thread_cache_size	= 8
    # This replaces the startup script and checks MyISAM tables if needed
    # the first time they are touched
    myisam-recover		= BACKUP
    #max_connections        = 100
    #table_cache            = 64
    #thread_concurrency     = 10
    #
    # * Query Cache Configuration
    #
    query_cache_limit       = 1M
    query_cache_size        = 16M
    #
    # * Logging and Replication
    #
    # Both location gets rotated by the cronjob.
    # Be aware that this log type is a performance killer.
    log		= /var/log/mysql/mysql.log
    #
    # Error logging goes to syslog. This is a Debian improvement :)
    #
    # Here you can see queries with especially long duration
    #log_slow_queries	= /var/log/mysql/mysql-slow.log
    #long_query_time = 2
    #log-queries-not-using-indexes
    #
    # The following can be used as easy to replay backup logs or for replication.
    # note: if you are setting up a replication slave, see README.Debian about
    #       other settings you may need to change.
    #server-id		= 1
    #log_bin			= /var/log/mysql/mysql-bin.log
    expire_logs_days	= 10
    max_binlog_size         = 100M
    #binlog_do_db		= include_database_name
    #binlog_ignore_db	= include_database_name
    #
    # * BerkeleyDB
    #
    # Using BerkeleyDB is now discouraged as its support will cease in 5.1.12.
    skip-bdb
    #
    # * InnoDB
    #
    # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/.
    # Read the manual for more InnoDB related options. There are many!
    # You might want to disable InnoDB to shrink the mysqld process by circa 100MB.
    #skip-innodb
    #
    # * Security Features
    #
    # Read the manual, too, if you want chroot!
    # chroot = /var/lib/mysql/
    #
    # For generating SSL certificates I recommend the OpenSSL GUI "tinyca".
    #
    # ssl-ca=/etc/mysql/cacert.pem
    # ssl-cert=/etc/mysql/server-cert.pem
    # ssl-key=/etc/mysql/server-key.pem
    
    
    
    [mysqldump]
    quick
    quote-names
    max_allowed_packet	= 16M
    
    [mysql]
    #no-auto-rehash	# faster start of mysql but no tab completition
    
    [isamchk]
    key_buffer		= 16M
    
    #
    # * NDB Cluster
    #
    # See /usr/share/doc/mysql-server-*/README.Debian for more information.
    #
    # The following configuration is read by the NDB Data Nodes (ndbd processes)
    # not from the NDB Management Nodes (ndb_mgmd processes).
    #
    # [MYSQL_CLUSTER]
    # ndb-connectstring=127.0.0.1
    
    
    #
    # * IMPORTANT: Additional settings that can override those from this file!
    #   The files must end with '.cnf', otherwise they'll be ignored.
    #
    !includedir /etc/mysql/conf.d/
    Hope this helps! Thx
     
    Last edited: May 31, 2010
  2. falko

    falko Super Moderator ISPConfig Developer

    You need to have
    Code:
    amavis unix - - - - 2 smtp
            -o smtp_data_done_timeout=1200
            -o smtp_send_xforward_command=yes
    
    127.0.0.1:10025 inet n - - - - smtpd
            -o content_filter=
            -o local_recipient_maps=
            -o relay_recipient_maps=
            -o smtpd_restriction_classes=
            -o smtpd_client_restrictions=
            -o smtpd_helo_restrictions=
            -o smtpd_sender_restrictions=
            -o smtpd_recipient_restrictions=permit_mynetworks,reject
            -o mynetworks=127.0.0.0/8
            -o strict_rfc821_envelopes=yes
            -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks
            -o smtpd_bind_address=127.0.0.1
    at the end of /etc/postfix/master.cf.
     
  3. beno

    beno New Member

    thanks but still no luck...

    Thank you falco for the quick answer, however after adding those lines and restarting postfix, i can still not logon to squirrelmail using mydomain.eu/squirrelmail and webmaster@mydomain.eu

    error message by SquirrelMail is still:

    Code:
    ERROR: Connection dropped by IMAP server.
    
    in mail.log:

    Code:
    May 31 14:51:02 srv1 imapd: Connection, ip=[::ffff:127.0.0.1]
    EDITED: to be more precise, let me paste the /etc/postfix/master.cf file's contents here (the original file had most of it commented out, i simply removed that part and added yours:

    Code:
    #
    # Postfix master process configuration file.  For details on the format
    # of the file, see the master(5) manual page (command: "man 5 master").
    #
    # Do not forget to execute "postfix reload" after editing this file.
    #
    # ==========================================================================
    # service type  private unpriv  chroot  wakeup  maxproc command + args
    #               (yes)   (yes)   (yes)   (never) (100)
    # ==========================================================================
    smtp      inet  n       -       -       -       -       smtpd -v
    #submission inet n       -       -       -       -       smtpd
    #  -o smtpd_tls_security_level=encrypt
    
    #hier geändert wegen Nichtannahme von Mails:
       -o smtpd_sasl_auth_enable=yes
    
    
    #  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    #  -o milter_macro_daemon_name=ORIGINATING
    #smtps     inet  n       -       -       -       -       smtpd
    #  -o smtpd_tls_wrappermode=yes
    #  -o smtpd_sasl_auth_enable=yes
    #  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    #  -o milter_macro_daemon_name=ORIGINATING
    #628      inet  n       -       -       -       -       qmqpd
    pickup    fifo  n       -       -       60      1       pickup
    cleanup   unix  n       -       -       -       0       cleanup
    qmgr      fifo  n       -       n       300     1       qmgr
    #qmgr     fifo  n       -       -       300     1       oqmgr
    tlsmgr    unix  -       -       -       1000?   1       tlsmgr
    rewrite   unix  -       -       -       -       -       trivial-rewrite
    bounce    unix  -       -       -       -       0       bounce
    defer     unix  -       -       -       -       0       bounce
    trace     unix  -       -       -       -       0       bounce
    verify    unix  -       -       -       -       1       verify
    flush     unix  n       -       -       1000?   0       flush
    proxymap  unix  -       -       n       -       -       proxymap
    proxywrite unix -       -       n       -       1       proxymap
    smtp      unix  -       -       -       -       -       smtp
    # When relaying mail as backup MX, disable fallback_relay to avoid MX loops
    relay     unix  -       -       -       -       -       smtp
    	-o smtp_fallback_relay=
    #       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
    showq     unix  n       -       -       -       -       showq
    error     unix  -       -       -       -       -       error
    retry     unix  -       -       -       -       -       error
    discard   unix  -       -       -       -       -       discard
    local     unix  -       n       n       -       -       local
    virtual   unix  -       n       n       -       -       virtual
    lmtp      unix  -       -       -       -       -       lmtp
    anvil     unix  -       -       -       -       1       anvil
    scache    unix  -       -       -       -       1       scache
    #
    # ====================================================================
    # Interfaces to non-Postfix software. Be sure to examine the manual
    # pages of the non-Postfix software to find out what options it wants.
    #
    # Many of the following services use the Postfix pipe(8) delivery
    # agent.  See the pipe(8) man page for information about ${recipient}
    # and other message envelope options.
    # ====================================================================
    #
    # maildrop. See the Postfix MAILDROP_README file for details.
    # Also specify in main.cf: maildrop_destination_recipient_limit=1
    #
    maildrop  unix  -       n       n       -       -       pipe
      flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
    #
    # See the Postfix UUCP_README file for configuration details.
    #
    uucp      unix  -       n       n       -       -       pipe
      flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
    #
    # Other external delivery methods.
    #
    ifmail    unix  -       n       n       -       -       pipe
      flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
    bsmtp     unix  -       n       n       -       -       pipe
      flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
    scalemail-backend unix	-	n	n	-	2	pipe
      flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
    mailman   unix  -       n       n       -       -       pipe
      flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
      ${nexthop} ${user}
    
    amavis unix - - - - 2 smtp
            -o smtp_data_done_timeout=1200
            -o smtp_send_xforward_command=yes
    
    127.0.0.1:10025 inet n - - - - smtpd
            -o content_filter=
            -o local_recipient_maps=
            -o relay_recipient_maps=
            -o smtpd_restriction_classes=
            -o smtpd_client_restrictions=
            -o smtpd_helo_restrictions=
            -o smtpd_sender_restrictions=
            -o smtpd_recipient_restrictions=permit_mynetworks,reject
            -o mynetworks=127.0.0.0/8
            -o strict_rfc821_envelopes=yes
            -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks
            -o smtpd_bind_address=127.0.0.1
    I hope you can help still...
     
    Last edited: May 31, 2010
  4. falko

    falko Super Moderator ISPConfig Developer

    Are there any other errors in mail.log?
    What's the output of
    Code:
    netstat -tap
    ?
     
  5. fbnewtz

    fbnewtz New Member

    In your authdaemonrc turn

    DEBUG_LOGIN=0

    to

    DEBUG_LOGIN=1


    You might get some more information on what is happening.
     
  6. beno

    beno New Member

    is this relevant?

    DEBUG_LOGIN was not part of the file, so i added it at the end, however nothing changed in the mail.log - is this supposed to put the logs somewhere else?

    in the meantime i realized something is happening at times i don't touch anything and it repeats almost always at the same time, once at midnight and another time at 6.25 am:

    Code:
    Jun  2 00:00:01 srv1 postfix/pickup[20172]: 1A45040216: uid=0 from=<root>
    Jun  2 00:00:01 srv1 postfix/cleanup[20220]: 1A45040216: message-id=<20100601220001.1A45040216@srv1.mydomain.eu>
    Jun  2 00:00:01 srv1 postfix/qmgr[18873]: 1A45040216: from=<root@localhost>, size=511, nrcpt=1 (queue active)
    Jun  2 00:00:01 srv1 postfix/trivial-rewrite[20222]: warning: do not list domain mythird-domain.com in BOTH mydestination and virtual_mailbox_domains
    Jun  2 00:00:01 srv1 postfix/local[20223]: 1A45040216: to=<m.p@mythird-domain.com>, orig_to=<postmaster@mydomain.eu>, relay=local, delay=0.07, delays=0.04/0.01/0/0.02, dsn=5.1.1, status=bounced (unknown user: "m.p")
    Jun  2 00:00:01 srv1 postfix/cleanup[20220]: 26A5340217: message-id=<20100601220001.26A5340217@srv1.mydomain.eu>
    Jun  2 00:00:01 srv1 postfix/qmgr[18873]: 26A5340217: from=<>, size=2318, nrcpt=1 (queue active)
    Jun  2 00:00:01 srv1 postfix/cleanup[20220]: 2C0A540219: message-id=<20100601220001.26A5340217@srv1.mydomain.eu>
    Jun  2 00:00:01 srv1 postfix/bounce[20224]: 1A45040216: sender non-delivery notification: 26A5340217
    Jun  2 00:00:01 srv1 postfix/qmgr[18873]: 1A45040216: removed
    Jun  2 00:00:01 srv1 postfix/qmgr[18873]: 2C0A540219: from=<>, size=2448, nrcpt=1 (queue active)
    Jun  2 00:00:01 srv1 postfix/local[20223]: 26A5340217: to=<root@localhost>, relay=local, delay=0.03, delays=0.02/0/0/0.01, dsn=2.0.0, status=sent (forwarded as 2C0A540219)
    Jun  2 00:00:01 srv1 postfix/trivial-rewrite[20222]: warning: do not list domain mythird-domain.com in BOTH mydestination and virtual_mailbox_domains
    Jun  2 00:00:01 srv1 postfix/qmgr[18873]: 26A5340217: removed
    Jun  2 00:00:01 srv1 postfix/local[20223]: 2C0A540219: to=<m.p@mythird-domain.com>, orig_to=<root@localhost>, relay=local, delay=0.03, delays=0.01/0/0/0.01, dsn=5.1.1, status=bounced (unknown user: "m.p")
    Jun  2 00:00:01 srv1 postfix/qmgr[18873]: 2C0A540219: removed
    Jun  2 06:25:02 srv1 postfix/pickup[20368]: 082B240216: uid=0 from=<root>
    Jun  2 06:25:02 srv1 postfix/cleanup[20503]: 082B240216: message-id=<20100602042502.082B240216@srv1.mydomain.eu>
    Jun  2 06:25:02 srv1 postfix/qmgr[18873]: 082B240216: from=<root@localhost>, size=806, nrcpt=1 (queue active)
    Jun  2 06:25:02 srv1 postfix/cleanup[20503]: 0F72440215: message-id=<20100602042502.082B240216@srv1.mydomain.eu>
    Jun  2 06:25:02 srv1 postfix/qmgr[18873]: 0F72440215: from=<root@localhost>, size=936, nrcpt=1 (queue active)
    Jun  2 06:25:02 srv1 postfix/trivial-rewrite[20505]: warning: do not list domain mythird-domain.com in BOTH mydestination and virtual_mailbox_domains
    Jun  2 06:25:02 srv1 postfix/local[20506]: 082B240216: to=<root@localhost>, orig_to=<root>, relay=local, delay=0.62, delays=0.61/0.01/0/0.01, dsn=2.0.0, status=sent (forwarded as 0F72440215)
    Jun  2 06:25:02 srv1 postfix/qmgr[18873]: 082B240216: removed
    Jun  2 06:25:02 srv1 postfix/local[20506]: 0F72440215: to=<m.p@mythird-domain.com>, orig_to=<root>, relay=local, delay=0.01, delays=0/0/0/0.01, dsn=5.1.1, status=bounced (unknown user: "m.p")
    Jun  2 06:25:02 srv1 postfix/cleanup[20503]: 12FFE40218: message-id=<20100602042502.12FFE40218@srv1.mydomain.eu>
    Jun  2 06:25:02 srv1 postfix/qmgr[18873]: 12FFE40218: from=<>, size=2696, nrcpt=1 (queue active)
    Jun  2 06:25:02 srv1 postfix/cleanup[20503]: 163D040219: message-id=<20100602042502.12FFE40218@srv1.mydomain.eu>
    Jun  2 06:25:02 srv1 postfix/bounce[20507]: 0F72440215: sender non-delivery notification: 12FFE40218
    Jun  2 06:25:02 srv1 postfix/local[20506]: 12FFE40218: to=<root@localhost>, relay=local, delay=0.02, delays=0.01/0/0/0, dsn=2.0.0, status=sent (forwarded as 163D040219)
    Jun  2 06:25:02 srv1 postfix/qmgr[18873]: 12FFE40218: removed
    Jun  2 06:25:02 srv1 postfix/qmgr[18873]: 163D040219: from=<>, size=2826, nrcpt=1 (queue active)
    Jun  2 06:25:02 srv1 postfix/trivial-rewrite[20505]: warning: do not list domain mythird-domain.com in BOTH mydestination and virtual_mailbox_domains
    Jun  2 06:25:02 srv1 postfix/qmgr[18873]: 0F72440215: removed
    Jun  2 06:25:02 srv1 postfix/local[20506]: 163D040219: to=<m.p@mythird-domain.com>, orig_to=<root@localhost>, relay=local, delay=0.01, delays=0/0/0/0, dsn=5.1.1, status=bounced (unknown user: "m.p")
    Jun  2 06:25:02 srv1 postfix/qmgr[18873]: 163D040219: removed
     
  7. beno

    beno New Member

    output of netstat -tap

    @falko, the output of netstat -tap

    Code:
    srv1:~# netstat -tap
    Active Internet connections (servers and established)
    Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
    tcp        0      0 localhost:10025         *:*                     LISTEN      18871/master
    tcp        0      0 localhost:3305          *:*                     LISTEN      6393/mysqld
    tcp        0      0 localhost:mysql         *:*                     LISTEN      8616/mysqld
    tcp        0      0 localhost:746           *:*                     LISTEN      2266/famd
    tcp        0      0 *:sunrpc                *:*                     LISTEN      1708/portmap
    tcp        0      0 *:ssh                   *:*                     LISTEN      1961/sshd
    tcp        0      0 *:49078                 *:*                     LISTEN      1719/rpc.statd
    tcp        0      0 *:smtp                  *:*                     LISTEN      18871/master
    tcp        0     52 srv1.mydomain.eu:ssh 92-249-162-132.poo:2165 ESTABLISHED 20587/1
    tcp        0      0 srv1.mydomain.eu:ssh 92-249-162-132.poo:1888 ESTABLISHED 20566/sshd: root@no
    tcp        0      0 srv1.mydomain.eu:ssh 92-249-162-132.poo:1901 ESTABLISHED 20570/sshd: root@no
    tcp6       0      0 [::]:imaps              [::]:*                  LISTEN      8123/couriertcpd
    tcp6       0      0 [::]:pop3s              [::]:*                  LISTEN      8154/couriertcpd
    tcp6       0      0 [::]:8009               [::]:*                  LISTEN      2323/jsvc
    tcp6       0      0 [::]:pop3               [::]:*                  LISTEN      8136/couriertcpd
    tcp6       0      0 [::]:imap2              [::]:*                  LISTEN      8101/couriertcpd
    tcp6       0      0 [::]:www                [::]:*                  LISTEN      4921/apache2
    tcp6       0      0 [::]:8180               [::]:*                  LISTEN      2323/jsvc
    tcp6       0      0 [::]:ssh                [::]:*                  LISTEN      1961/sshd
    tcp6       0      0 [::]:telnet             [::]:*                  LISTEN      2265/xinetd
    
     
  8. falko

    falko Super Moderator ISPConfig Developer

  9. beno

    beno New Member

    i was asked not to install

    it doesn't seem to have been installed as my client asked me not to install any spam filter, is there a way around this?
     
  10. falko

    falko Super Moderator ISPConfig Developer

    Then you must remove
    Code:
    amavis unix - - - - 2 smtp
            -o smtp_data_done_timeout=1200
            -o smtp_send_xforward_command=yes
    
    127.0.0.1:10025 inet n - - - - smtpd
            -o content_filter=
            -o local_recipient_maps=
            -o relay_recipient_maps=
            -o smtpd_restriction_classes=
            -o smtpd_client_restrictions=
            -o smtpd_helo_restrictions=
            -o smtpd_sender_restrictions=
            -o smtpd_recipient_restrictions=permit_mynetworks,reject
            -o mynetworks=127.0.0.0/8
            -o strict_rfc821_envelopes=yes
            -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks
            -o smtpd_bind_address=127.0.0.1
    from your master.cf and restart Postfix.
     
  11. beno

    beno New Member

    was folder permission issue - new errors

    @falco: ok, i deleted it and restarted postfix

    important: the client just came back to me and he said the folder /home/vmail has to has owner "vmail". once he change that, i received a new error message from quirrelmail:

    Code:
    Error opening ../config/default_pref
    Could not create initial preference file!
    /var/lib/squirrelmail/data/ should be writable by user www-data
    Please contact your system administrator and report this error.
    i then went to the folder /var/lib/squirrelmail/data/ and tried to change its permission, but the only way that didn't turn back the same error message was 777 - well, I didn't try all versions to be honest, so what do you think, what should it be set to? also, what account should be the owner of this folder? currently it's set to vmail

    once i logged in i could see the email list (well, actually it was empty) in the middle but on the left hand side it gave following error:

    Code:
    ERROR:
    ERROR: Could not complete request.
    Query: CREATE "INBOX.Sent"
    Reason Given: Cannot create this folder.
    I tried to give the .Sent (hidden) folder in /home/vmail 777 permission but that didn't help (it was on 700) still owned by vmail

    i tested sending and it worked, then i replied but that bounced back with error

    Code:
    The error that the other server returned was: 550 550 5.1.1 <malcolm.spiteri@xxlwinners.com>: Recipient address rejected: User unknown in virtual mailbox table (state 14).
    also, the documentation says that when i create a new mailbox and send an e-mail to it with mailx, it will create a mailbox in vmail. well, i tested that and it did not work, can you help there? If i remember well i had to create the folder myself. now, after i tried to login there, i can see that it created a hidden .Sent folder but nothing else and also it displays the folder not found error in the middle (i guess it's looking for the non-existing Inbox folder) like the for the above, working account for the sent folder.

    i'm getting close, your help would be soooo much appreciated!
     
    Last edited: Jun 3, 2010
  12. beno

    beno New Member

    no errors in IMAP

    the client added that his laptop e-mail client setup with IMAP didn't report errors!
     

Share This Page