ISPConfig with SuSR 10.1 32Bit - PHP-Binary ERROR

Discussion in 'Installation/Configuration' started by Wulfi75, Jun 13, 2007.

  1. Wulfi75

    Wulfi75 New Member

    Hi,

    I will install ISPConfig but the installation break up and give me an error message:

    NOTE: settings for "make test" are now controlled using "t/config.dist".
    See that file if you wish to customise what tests are run, and how.

    checking module dependencies and their versions...

    ***************************************************************************
    ERROR: the required HTML::parser (version 3.43) module is not installed. at lib/Mail/SpamAssassin/Util/DependencyInfo.pm line 293, <S TDIN> line 1.


    HTML is used for an ever-increasing amount of email so this dependency
    is unavoidable. Run "perldoc -q html" for additional information.


    ***************************************************************************
    ERROR: the required Net::DNS (version 0.34) module is not installed. at lib/Mail/SpamAssassin/Util/DependencyInfo.pm line 293, <STDIN > line 1.


    Used for all DNS-based tests (SBL, XBL, SpamCop, DSBL, etc.),
    perform MX checks, and is also used when manually reporting spam to
    SpamCop.

    You need to make sure the Net::DNS version is sufficiently up-to-date:

    - version 0.34 or higher on Unix systems
    - version 0.46 or higher on Windows systems


    ***************************************************************************
    NOTE: the optional Mail::SPF module is not installed.

    Used to check DNS Sender Policy Framework (SPF) records to fight email
    address forgery and make it easier to identify spams. (This is preferred
    over Mail::SPF::Query.)


    ***************************************************************************
    NOTE: the optional Mail::SPF::Query module is not installed.

    Used to check DNS Sender Policy Framework (SPF) records to fight email
    address forgery and make it easier to identify spams. (Mail::SPF is
    preferred instead of this module.)


    ***************************************************************************
    NOTE: the optional IP::Country module is not installed.

    Used by the RelayCountry plugin (not enabled by default) to determine
    the domain country codes of each relay in the path of an email.


    ***************************************************************************
    NOTE: the optional Razor2 (version 2.61) module is not installed.

    Used to check message signatures against Vipul's Razor collaborative
    filtering network. Razor has a large number of dependencies on CPAN
    modules. Feel free to skip installing it, if this makes you nervous;
    SpamAssassin will still work well without it.

    More info on installing and using Razor can be found
    at http://wiki.apache.org/spamassassin/InstallingRazor .


    ***************************************************************************
    NOTE: the optional Net::Ident module is not installed.

    If you plan to use the --auth-ident option to spamd, you will need
    to install this module.


    ***************************************************************************
    NOTE: the optional IO::Socket::INET6 module is not installed.

    This is required if the first nameserver listed in your IP
    configuration or /etc/resolv.conf file is available only via
    an IPv6 address.


    ***************************************************************************
    NOTE: the optional IO::Socket::SSL module is not installed.

    If you wish to use SSL encryption to communicate between spamc and
    spamd (the --ssl option to spamd), you need to install this
    module. (You will need the OpenSSL libraries and use the
    ENABLE_SSL="yes" argument to Makefile.PL to build and run an SSL
    compatibile spamc.)


    ***************************************************************************
    NOTE: the optional Mail::DomainKeys module is not installed.

    If this module is installed, and you enable the DomainKeys plugin,
    SpamAssassin will perform Domain Key lookups when Domain Key
    information is present in the message headers. (Note that new versions
    of Mail::DKIM render this module superfluous.)


    ***************************************************************************
    NOTE: the optional Mail::DKIM module is not installed.

    If this module is installed, and you enable the DKIM plugin,
    SpamAssassin will perform DKIM lookups when a DKIM-Signature
    header is present in the message headers. (New versions of this module
    support both Domain Keys and DKIM, rendering Mail::DomainKeys obsolete.)


    ***************************************************************************
    NOTE: the optional LWP::UserAgent module is not installed.

    The "sa-update" script requires this module to make HTTP requests.


    ***************************************************************************
    NOTE: the optional HTTP::Date module is not installed.

    The "sa-update" script requires this module to make HTTP
    If-Modified-Since GET requests.


    ***************************************************************************
    NOTE: the optional Archive::Tar (version 1.23) module is not installed.

    The "sa-update" script requires this module to access tar update
    archive files.


    ***************************************************************************
    NOTE: the optional IO::Zlib (version 1.04) module is not installed.

    The "sa-update" script requires this module to access compressed
    update archive files.


    ***************************************************************************
    NOTE: the optional Encode::Detect module is not installed.

    If you plan to use the normalize_charset config setting to detect
    charsets and convert them into Unicode, you will need to install
    this module.

    REQUIRED module missing: HTML::parser
    REQUIRED module missing: Net::DNS
    optional module missing: Mail::SPF
    optional module missing: Mail::SPF::Query
    optional module missing: IP::Country
    optional module missing: Razor2
    optional module missing: Net::Ident
    optional module missing: IO::Socket::INET6
    optional module missing: IO::Socket::SSL
    optional module missing: Mail::DomainKeys
    optional module missing: Mail::DKIM
    optional module missing: LWP::UserAgent
    optional module missing: HTTP::Date
    optional module missing: Archive::Tar
    optional module missing: IO::Zlib
    optional module missing: Encode::Detect

    warning: some functionality may not be available,
    please read the above report before continuing!

    ERROR: Could not configure SpamAssassin
    cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
    mv: cannot stat `binaries/aps.tar.gz': No such file or directory
    mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
    mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
    mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
    mv: cannot stat `binaries/cronolog': No such file or directory
    mv: cannot stat `binaries/cronosplit': No such file or directory
    mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
    mv: cannot stat `binaries/zip': No such file or directory
    mv: cannot stat `binaries/unzip': No such file or directory
    tar: spamassassin.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `spamassassin': No such file or directory
    tar: uudeview.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `uudeview': No such file or directory
    tar: clamav.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `clamav': No such file or directory
    tar: aps.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    ./setup2: line 873: ispconfig_tmp/php/bin/php: No such file or directory
    ERROR: Das mitgelieferte PHP-Binary funktioniert auf Ihrem System nicht! Die Installation bricht hier ab!


    Any suggestions?

    Wulfi
     
  2. chocjulio33

    chocjulio33 New Member

    I haveing the same issue but only on one machine out of six!

    I experiencing this issue right now aswell with suse 10.1 and ispconfig. But to me it almost seems hardware related. I uses the perfect 10.1 setup on six of my servers all good. But one dell rack is having this same issue. I was going to reinstall tonight and try again. Good luck Choc!
     
  3. falko

    falko Super Moderator Howtoforge Staff Moderator HowtoForge Supporter ISPConfig Developer

    Please run
    Code:
    yast2 -i perl-HTML-Parser perl-Net-DNS perl-Digest-SHA1
    as shown on http://www.howtoforge.com/perfect_setup_suse_10.1_p7
     
  4. chocjulio33

    chocjulio33 New Member

    thanks for the quick reply mine did eventually work

    got mine to finally go, it was something to do with the packages. how important is it to do the suse update?
    thanks guys

    still cant get remoting to work with this configuration although im convinced its php 5.2.2 on suse. any easy fixs for this?

    thanks you guys rock
     
  5. falko

    falko Super Moderator Howtoforge Staff Moderator HowtoForge Supporter ISPConfig Developer

    Remoting works only if you have installed the ISPConfig-dev version. It's not supported by the stable branch.
     
  6. petethebloke

    petethebloke New Member

    I'm stuck at the same place

    Installing 2.2.21 on Centos 5.0(final) in a SSH. I have run:

    yum install perl-HTML-Parser
    yum install perl-Net-DNS
    yum install perl-Digest-SHA1
    yum install libnet-ident-perl
    yum install libio-socket-ssl-perl
    yum install libwww-perl
    yum install libdate-manip-perl
    yum install libtimedate-perl
    yum install libarchive-tar-perl

    and they all said "nothing to do".

    I'd be grateful for any pointers. I'm a bit of a novice.

    Thanks,

    Pete
     
  7. till

    till Super Moderator Howtoforge Staff HowtoForge Supporter ISPConfig Developer

    It seems as if the perl modules have been installed in a path that is not available during installation. You might want to try to install the perl modules manually as dsecribed in the installation manual:

    http://www.ispconfig.org/manual_installation.htm
     
  8. petethebloke

    petethebloke New Member

    Thanks till. I'll go and give that a try. I was working from that page but didn't read on past the point where I got blown out.

    Should I also set up MySQL users/passwords before I start?

    Thanks again,

    Pete
     
  9. petethebloke

    petethebloke New Member

    Progress!

    OK. I made some progress. Here's what I did in case it helps someone else.

    I ran:
    perl -MCPAN -e shell
    install HTML::parser
    install Net::DNS
    install Digest::SHA1​

    But:
    install DB_File​
    kept failing with 'not found db.h'

    I tried all sorts of stuff to get Berkeley DB installed and nothing seemed to work but when I ran
    yum install db
    yum install db4​
    it kept saying nothing to do.
    I tried to make Berkeley db manually but just got reams of errors.
    See:
    http://flakshack.com/anti-spam/wiki/index.php?page=Installing+BerkeleyDB

    After I got fed up, having tried a million things, I decided to untar the install files just to see what would happen...

    tar xvfz ISPConfig*.tar.gz
    cd install_ispconfig
    ./setup

    And amazingly, Bob's yer uncle, it all worked fine and I now have ISPConfig up and running. I'm not sure which bit of what I did fixed it but there you go!

    Thanks for your help,

    Pete
     
  10. falko

    falko Super Moderator Howtoforge Staff Moderator HowtoForge Supporter ISPConfig Developer

    Try
    Code:
    yum install db-devel
     yum install db4-devel
    instead.
     

Share This Page