ISPConfig httpd

Discussion in 'General' started by brightshadow, Aug 5, 2006.

  1. brightshadow

    brightshadow New Member

    Code:
    ###################################
    #
    # ISPConfig vHost Configuration File
    #         Version 1.0
    #
    ###################################
    #
    NameVirtualHost 75.27.81.221:80
    <VirtualHost 75.27.81.221:80>
      ServerName localhost
      ServerAdmin root@localhost
      DocumentRoot /var/www/sharedip
    </VirtualHost>
    #
    #
    ######################################
    # Vhost: db.er-center.com:80
    ######################################
    #
    #
    <VirtualHost 75.27.81.221:80>
    ServerName db.er-center.com:80
    ServerAdmin [email protected]
    DocumentRoot /var/www/web11/web
    ServerAlias er-center.com
    DirectoryIndex index.html index.htm index.php index.php5 index.php4 index.php3 index.shtml index.cgi index.pl index.jsp Default.htm default.htm
    ScriptAlias  /cgi-bin/ /var/www/web11/cgi-bin/
    AddHandler cgi-script .cgi
    AddHandler cgi-script .pl
    ErrorLog /var/www/web11/log/error.log
    AddType application/x-httpd-php .php .php3 .php4 .php5
    <Files *.php>
        SetOutputFilter PHP
        SetInputFilter PHP
    </Files>
    <Files *.php3>
        SetOutputFilter PHP
        SetInputFilter PHP
    </Files>
    <Files *.php4>
        SetOutputFilter PHP
        SetInputFilter PHP
    </Files>
    <Files *.php5>
        SetOutputFilter PHP
        SetInputFilter PHP
    </Files>
    php_admin_flag safe_mode Off
    AddType text/html .shtml
    AddOutputFilter INCLUDES .shtml
    Alias /error/ "/var/www/web11/web/error/"
    ErrorDocument 400 /error/invalidSyntax.html
    ErrorDocument 401 /error/authorizationRequired.html
    ErrorDocument 403 /error/forbidden.html
    ErrorDocument 404 /error/fileNotFound.html
    ErrorDocument 405 /error/methodNotAllowed.html
    ErrorDocument 500 /error/internalServerError.html
    ErrorDocument 503 /error/overloaded.html
    AliasMatch ^/~([^/]+)(/(.*))? /var/www/web11/user/$1/web/$3
    AliasMatch ^/users/([^/]+)(/(.*))? /var/www/web11/user/$1/web/$3
    </VirtualHost>
    #
    #
    #
    


    Just wondering...Are you able to reset the web[ID] counter? Like right now it's 11 can i set it back to one in a simple manner?
     
    Last edited: Aug 17, 2006
  2. falko

    falko Super Moderator ISPConfig Developer

    You're using the wrong IP address (75.27.81.221 instead of 192.168.1.71 or 192.168.1.79). You must use the IP addresses in ISPConfig that you see when you run
    Code:
    ifconfig
    on the shell.


    No, that's not possible.
     
  3. brightshadow

    brightshadow New Member

    Ooops...I didn't notice I posted that wrong. My router rebooted and it is the one that assigns IPs, so when I posted that, I still hadn't set up static IPs on the router, but now eth0 shows
    Code:
    inet addr:75.27.81.221 Bcast:75.27.81.255 Mask:255.255.255.0
    
     
  4. falko

    falko Super Moderator ISPConfig Developer

    So what's the output of
    Code:
    ifconfig
    now on your ISPConfig system?
     
  5. brightshadow

    brightshadow New Member

    Code:
    ifconfig
    eth0      Link encap:Ethernet  HWaddr 00:17:31:C4:4F:33
              inet addr:75.27.81.221  Bcast:75.27.81.255  Mask:255.255.255.0
              inet6 addr: fe80::217:31ff:fec4:4f33/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:450247 errors:0 dropped:0 overruns:0 frame:0
              TX packets:13050 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:29914241 (28.5 MiB)  TX bytes:558597 (545.5 KiB)
              Interrupt:10 Base address:0xa000
    
    eth1      Link encap:Ethernet  HWaddr 00:17:31:C4:56:74
              inet addr:192.168.1.79  Bcast:192.168.1.255  Mask:255.255.255.0
              inet6 addr: fe80::217:31ff:fec4:5674/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:513645 errors:0 dropped:0 overruns:0 frame:0
              TX packets:84062 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:51409506 (49.0 MiB)  TX bytes:10897968 (10.3 MiB)
              Interrupt:11 Base address:0x6000
    
    lo        Link encap:Local Loopback
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:2827 errors:0 dropped:0 overruns:0 frame:0
              TX packets:2827 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:2477806 (2.3 MiB)  TX bytes:2477806 (2.3 MiB)
    
     
  6. falko

    falko Super Moderator ISPConfig Developer

    Is Vhosts_ispconfig.conf included in your Apache configuration? Any errors in the Apache logs?
     
  7. intensivex

    intensivex New Member

    Auto create ifconfig / eth* record?

    I'm not sure I'm posting this in the correct thread, and please pardon me for interjecting a question into your conversation, but I believe its the most relevant and up to date thread ...

    We're moving over from Plesk, and we're obviously new to ISPconfig in general. We've got a fair handle on the system and have installed things successfully. Now comes the headaches ...

    We're trying to simply (well maybe not simply) auto detect a block of assigned IP's issued by Godaddy and automatically create interface records / eth* for each. We've got a fair grip on the programming aspect, but are completely baffled where the allocated static IP's are being "parked" on the server.

    In Plesk, there is a "Re-Read" IP pool option that will scan and pick up any IPs allocated to your server. This is the same process where looking for with ISPconfig, and if none exists, we will create one. I've been search for 2 days for some direction, had numerous frustrating calls with NoDaddy's brainless Teir 1 support (Teir 2 no longer takes phone calls - grrrr), and read countless online articles looking for some hint, but I'm lost.

    A point in the right direction would be tremendously helpful.

    Question simplified:

    How do we have ISPconfig (or relevant utility) scan for allocated IPs and create necessary records for each one detected?

    We're trying to do a tiny bit more then that, but I need to start somewhere.

    Thanks in advance for your time,

    Respectfully,

    Chris
     
  8. falko

    falko Super Moderator ISPConfig Developer

    If $go_info["server"]["network_config"] is set to 0 in /home/admispconfig/ispconfig/lib/config.inc.php:
    Set up the new IP addresses manually on your system, and afterwards add the new IP addresses to the IP address field under Management -> Server -> Settings.

    If $go_info["server"]["network_config"] is set to 1:
    Just add your new IP addresses to the IP address field under Management -> Server -> Settings, and ISPConfig will add the new IP addresses to your network configuration.
     
  9. intensivex

    intensivex New Member

    Auto Bind IP tool?


    I may have mis-stated my initial question ...

    In respect to your response, it seems both steps 1 and 2 are one in the same:

    1) "Set up the new IP addresses manually on your system, and afterwards add the new IP addresses to the IP address field ... "

    2) "Just add your new IP addresses to the IP address field ..."

    <><>

    What I am actually looking for is a way to automatically BIND the IPs to the Ethernet device as Godaddy issues us blocks.

    The only way to make use of the IPs is to first create the necessary interface / eth* records ... obviously.

    In order to create these interfaces, the server must first know the IPs.

    The "re-read" IPs option inside the server management IP pool tool of Plesk will read some file on the server and Bind these IPs to the Ethernet Device. When using the "re-read" tool, newly provisioned IPs become available for use on the server ... If Godaddy provisions IPs, but this Re-read tool is NOT used, then the IPs will never become available for use inside plesk.

    What file is this Re-read tool grabbing these provisioned IPs from? ...

    Is godaddy creating the interfaces for the IPs on the server? .. I doubt it ... so the question remains, what is Plesk using/reading to grab these IPs?

    With that said, this is the functionality im looking for with ISPconfig. Adding IPs to the IP pool is fine, but in our case, we are building an automatic account creation and SSL system which will assign a static IP from our pool to the SSL / Hosting clients at signup. Our system will auto request(email) a new block of IPs from godaddy when a minimum limit is reached. Godaddy takes roughly a day to assign new IPs, but when they do, there is an added step (if not using Plesk) of entering the IPs into the server IP pool. Our system will be totally automated and hands off for the most part, but if we cannot auto Bind IPs then our attempts for no human intervention is in vain.

    I appreciate your help tremendously,

    Thanks again in advance

    Respectfully,

    Chris
     
  10. till

    till Super Moderator Staff Member ISPConfig Developer

    Maybe you misread falkos post as ISPConfig offers automatic network configuration.

    1) Enable automatic network configuration in ISPConfig as falko suggested.

    2) Instead of adding the IP addresses manually to the IP addresses field (which can be done in a chunk as the IP addresses are all in the sma field, one per line) you can update the field directly in the database, it is in the isp_isp_server and isp_server_ip table, set the status field in the isp_isp_server table to 'u' and then set the .run file to start the network configuration.
     

Share This Page