ISPconfig 3.0.1.1 mail problems

Discussion in 'Installation/Configuration' started by Leemur, May 19, 2009.

  1. Leemur

    Leemur New Member

    I followed the guide for an Ubuntu 9.04 server
    created a mail domain and a user.
    i can send mail but not recieve, it just gets bounced back with an unknown user

    mail-log
    Code:
    May 19 20:04:48 gorilla postfix/local[1327]: E9431CC85FD: to=, relay=local, delay=0.05, delays=0.02/0.02/0/0.01, dsn=5.1.1, status=bounced (unknown user: "leemur")
    here is my master.cnf if that can help
    Code:
    #
    # Postfix master process configuration file.  For details on the format
    # of the file, see the master(5) manual page (command: "man 5 master").
    #
    # Do not forget to execute "postfix reload" after editing this file.
    #
    # ==========================================================================
    # service type  private unpriv  chroot  wakeup  maxproc command + args
    #               (yes)   (yes)   (yes)   (never) (100)
    # ==========================================================================
    smtp      inet  n       -       -       -       -       smtpd
    #submission inet n       -       -       -       -       smtpd
    #  -o smtpd_tls_security_level=encrypt
    #  -o smtpd_sasl_auth_enable=yes
    #  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    #  -o milter_macro_daemon_name=ORIGINATING
    #smtps     inet  n       -       -       -       -       smtpd
    #  -o smtpd_tls_wrappermode=yes
    #  -o smtpd_sasl_auth_enable=yes
    #  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    #  -o milter_macro_daemon_name=ORIGINATING
    #628      inet  n       -       -       -       -       qmqpd
    pickup    fifo  n       -       -       60      1       pickup
    cleanup   unix  n       -       -       -       0       cleanup
    qmgr      fifo  n       -       n       300     1       qmgr
    #qmgr     fifo  n       -       -       300     1       oqmgr
    tlsmgr    unix  -       -       -       1000?   1       tlsmgr
    rewrite   unix  -       -       -       -       -       trivial-rewrite
    bounce    unix  -       -       -       -       0       bounce
    defer     unix  -       -       -       -       0       bounce
    trace     unix  -       -       -       -       0       bounce
    verify    unix  -       -       -       -       1       verify
    flush     unix  n       -       -       1000?   0       flush
    proxymap  unix  -       -       n       -       -       proxymap
    proxywrite unix -       -       n       -       1       proxymap
    smtp      unix  -       -       -       -       -       smtp
    # When relaying mail as backup MX, disable fallback_relay to avoid MX loops
    relay     unix  -       -       -       -       -       smtp
            -o smtp_fallback_relay=
    #       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
    showq     unix  n       -       -       -       -       showq
    error     unix  -       -       -       -       -       error
    retry     unix  -       -       -       -       -       error
    discard   unix  -       -       -       -       -       discard
    local     unix  -       n       n       -       -       local
    virtual   unix  -       n       n       -       -       virtual
    lmtp      unix  -       -       -       -       -       lmtp
    anvil     unix  -       -       -       -       1       anvil
    scache    unix  -       -       -       -       1       scache
    #
    # ====================================================================
    # Interfaces to non-Postfix software. Be sure to examine the manual
    # pages of the non-Postfix software to find out what options it wants.
    #
    # Many of the following services use the Postfix pipe(8) delivery
    # agent.  See the pipe(8) man page for information about ${recipient}
    # and other message envelope options.
    # agent.  See the pipe(8) man page for information about ${recipient}
    # and other message envelope options.
    # ====================================================================
    #
    # maildrop. See the Postfix MAILDROP_README file for details.
    # Also specify in main.cf: maildrop_destination_recipient_limit=1
    #
    maildrop  unix  -       n       n       -       -       pipe
      flags=R user=vmail argv=/usr/bin/maildrop -d vmail ${extension} ${recipient} ${user} ${nexthop} ${sender}
    #
    # See the Postfix UUCP_README file for configuration details.
    #
    uucp      unix  -       n       n       -       -       pipe
      flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
    #
    # Other external delivery methods.
    #
    ifmail    unix  -       n       n       -       -       pipe
      flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
    bsmtp     unix  -       n       n       -       -       pipe
      flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
    scalemail-backend unix  -       n       n       -       2       pipe
      flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
    mailman   unix  -       n       n       -       -       pipe
      flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
      ${nexthop} ${user}
    
    
    amavis unix - - - - 2 smtp
            -o smtp_data_done_timeout=1200
            -o smtp_send_xforward_command=yes
    
    127.0.0.1:10025 inet n - - - - smtpd
            -o content_filter=
            -o local_recipient_maps=
            -o relay_recipient_maps=
            -o smtpd_restriction_classes=
            -o smtpd_client_restrictions=
            -o smtpd_helo_restrictions=
            -o smtpd_sender_restrictions=
            -o smtpd_recipient_restrictions=permit_mynetworks,reject
            -o mynetworks=127.0.0.0/8
            -o strict_rfc821_envelopes=yes
            -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks
            -o smtpd_bind_address=127.0.0.1
    
     
    Last edited: May 19, 2009
  2. till

    till Super Moderator

    Please post the content of the main.cf file. Any other errors in the mail log file?
     
  3. Leemur

    Leemur New Member

    this is what's in the mail.log

    Code:
    May 20 09:20:58 gorilla postfix/trivial-rewrite[4000]: warning: do not list domain team-monkey.dk in BOTH mydestination and virtual_mailbox_domains
    May 20 09:20:58 gorilla postfix/smtpd[3847]: NOQUEUE: reject: RCPT from backup-mx2.post.tele.dk[80.160.77.115]: 550 5.1.1 : Recipient address rejected: User unknown in local recipient table; from= to= proto=ESMTP helo=
    May 20 09:20:58 gorilla postfix/smtpd[3847]: disconnect from backup-mx2.post.tele.dk[80.160.77.115]
    May 20 09:24:18 gorilla postfix/anvil[3999]: statistics: max connection rate 1/60s for (smtp:80.160.77.115) at May 20 09:20:58
    May 20 09:24:18 gorilla postfix/anvil[3999]: statistics: max connection count 1 for (smtp:80.160.77.115) at May 20 09:20:58
    May 20 09:24:18 gorilla postfix/anvil[3999]: statistics: max cache size 1 at May 20 09:20:58
    May 20 09:25:01 gorilla pop3d: Connection, ip=[::1]
    May 20 09:25:01 gorilla pop3d: Disconnected, ip=[::1]
    May 20 09:25:01 gorilla imapd: Connection, ip=[::1]
    May 20 09:25:01 gorilla imapd: Disconnected, ip=[::1], time=0
    and i just gonna get a copy of the main.cf :)
     
  4. Leemur

    Leemur New Member

    and here is my main.cf

    Code:
    # See /usr/share/postfix/main.cf.dist for a commented, more complete version
    
    
    # Debian specific:  Specifying a file name will cause the first
    # line of that file to be used as the name.  The Debian default
    # is /etc/mailname.
    #myorigin = /etc/mailname
    
    smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu)
    biff = no
    
    # appending .domain is the MUA's job.
    append_dot_mydomain = no
    
    # Uncomment the next line to generate "delayed mail" warnings
    #delay_warning_time = 4h
    
    readme_directory = /usr/share/doc/postfix
    
    # TLS parameters
    smtpd_tls_cert_file = /etc/postfix/smtpd.cert
    smtpd_tls_key_file = /etc/postfix/smtpd.key
    smtpd_use_tls = yes
    smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
    smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache
    
    # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for
    # information on enabling SSL in the smtp client.
    
    myhostname = team-monkey.dk
    alias_maps = hash:/etc/aliases
    alias_database = hash:/etc/aliases
    myorigin = /etc/mailname
    mydestination = team-monkey.dk, localhost, localhost.localdomain
    relayhost = 
    mynetworks = 127.0.0.0/8
    mailbox_size_limit = 0
    recipient_delimiter = +
    inet_interfaces = all
    html_directory = /usr/share/doc/postfix/html
    virtual_alias_domains = 
    virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, mysql:/etc/postfix/mysql-virtual_email2email.cf
    virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf
    virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf
    virtual_mailbox_base = /var/vmail
    virtual_uid_maps = static:5000
    virtual_gid_maps = static:5000
    smtpd_sasl_auth_enable = yes
    broken_sasl_auth_clients = yes
    smtpd_sasl_authenticated_header = yes
    smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, check_recipient_access mysql:/etc/postfix/mysql-virtual_recipient.cf, reject_unauth_destination
    smtpd_tls_security_level = may
    transport_maps = proxy:mysql:/etc/postfix/mysql-virtual_transports.cf
    relay_domains = mysql:/etc/postfix/mysql-virtual_relaydomains.cf
    virtual_create_maildirsize = yes
    virtual_maildir_extended = yes
    virtual_mailbox_limit_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailbox_limit_maps.cf
    virtual_mailbox_limit_override = yes
    virtual_maildir_limit_message = "The user you are trying to reach is over quota."
    virtual_overquota_bounce = yes
    proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $virtual_mailbox_limit_maps
    smtpd_sender_restrictions = check_sender_access mysql:/etc/postfix/mysql-virtual_sender.cf
    smtpd_client_restrictions = check_client_access mysql:/etc/postfix/mysql-virtual_client.cf
    maildrop_destination_concurrency_limit = 1
    maildrop_destination_recipient_limit = 1
    virtual_transport = maildrop
    header_checks = regexp:/etc/postfix/header_checks
    mime_header_checks = regexp:/etc/postfix/mime_header_checks
    nested_header_checks = regexp:/etc/postfix/nested_header_checks
    body_checks = regexp:/etc/postfix/body_checks
    content_filter = amavis:[127.0.0.1]:10024
    receive_override_options = no_address_mappings
    message_size_limit = 0
    
     
  5. till

    till Super Moderator

    This is the problem. You can not craete email accounts (virtual users) for the domain that is listed in mydestination. Change mydestination to e.g. mail.team-monkey.dk and restart postfix.
     
  6. Leemur

    Leemur New Member

    that was the trick

    thanks :)
     

Share This Page