ISPConfig 2.2.14 released

Discussion in 'General' started by till, Jun 19, 2007.

  1. till

    till Super Moderator

    ISPConfig 2.2.14 is available for download.

    This ISPConfig release adds support for Fedora. A Greek and Romanian
    translation of the interface has been added. PHP was updated to 5.2.3
    and ClamAV to 0.90.3.


    Detailed Changelog
    ------------------

    - Added: Support for Fedora 7
    - Added: Romanian translation.
    - Added: Greek translation.
    - Update: Updated Spanish translation.
    - Update: PHP (5.2.3)
    - Update: ClamAV (0.90.3).
    - Bugfix: FQDNs are now shown in the traffic statistics so that it is possible
    to differentiate between sub1.domain.com, sub2.domain.com, www.domain.com, etc.
    - Bugfix: If you move a web site from one customer to the other, and you delete the
    old owner (customer) of the web site, the web site isn't deleted anymore.
    - Bugfix: Changed regular expression for email addresses (welcome messages for resellers
    and customers) to better match RFC 2822.
    - Bugfix: Emails sent out by ISPConfig (welcome messages, support tickets) so that
    they don't show email headers in the body.
    - Bugfix: Added function to prevent clients from changing or deleting their co-domains.
    - Bugfix: Fixed a bug where backslashes were removed from the Apache Directives field.



    Download
    --------

    http://www.ispconfig.org/downloads.htm

    Forums
    ------

    http://www.howtoforge.com/forums


    Installation Instructions
    -------------------------

    Download the ISPConfig-2.2.14.tar.gz from sourceforge.net

    http://prdownloads.sourceforge.net/ispconfig/ISPConfig-2.2.14.tar.gz?download

    If you run ISPConfig on CentOS 4.x please update the HTML::parser perl module as described below before you proceed.


    Installation on the shell as root User:

    tar xvfz ISPConfig-2.2.14.tar.gz
    cd install_ispconfig
    ./setup

    The installer automatically detects the installed ISPConfig version and performs an update.



    ----------------------------------------
    Special note for Users of CentOS 4.x
    ----------------------------------------

    If you do not use ISPConfig on CentOs 4.x, ignore the instructions below!

    We also need the module HTML::parser. We could install the CentOS package perl-HTML-Parser, but this version is too old for the SpamAssassin version that comes with ISPConfig. It would result in the following error message during ISPConfig installation:

    REQUIRED module out of date: HTML::parser

    Therefore we must install the latest HTML::parser using the Perl shell.

    Run the following command to start the Perl shell:

    perl -MCPAN -e shell

    If you run the Perl shell for the first time you will be asked some questions. In most cases the default answers are ok. Because there's no ncftp package for CentOS, the Perl shell cannot find the programs ncftpget and ncftp, and you'll see something like this:

    Warning: ncftpget not found in PATH
    Where is your ncftpget program? []
    Warning: ncftp not found in PATH
    Where is your ncftp program? []

    It's ok to hit ENTER in both cases.

    Please note: If you run a firewall on your system you might have to turn it off while working on the Perl shell in order for the Perl shell to be able to fetch the needed modules without a big delay. You can switch it on afterwards.

    Now type in the following command to install the Perl module HTML::parser:

    install HTML::parser

    If the installation is successful, you'll see a line like this at the end:

    /usr/bin/make install -- OK

    Type

    q

    afterwards to leave the Perl shell.


    --
     
  2. edge

    edge HowtoForge Supporter

    Nice one again! Thank you!
     
  3. Hans

    Hans Moderator

    ISPConfig 2.2.14 successfully installed

    Till,

    Thank you for this new release.
    I just installed it on a production server with Debian Etch (64-bit SMP) and everything looks ok.

    Within the mail headers i see:

    X-Spam-Checker-Version: SpamAssassin 3.2.1 (2007-05-02)
    X-Virus-Checker-Version: clamassassin 1.2.4 with clamscan / ClamAV 0.90.3

    So that's ok too. :)

    Well done!

    Kind regards,
     
  4. AlArenal

    AlArenal New Member

    No problems (as usual) on two machines running Debian 4.0 (64 Bit), upgrading from 2.2.13.
     
  5. the_spy

    the_spy New Member

    No problem, upgraded from 2.2.13, Debian 4 32bit
    thanks
     
  6. fobicodam

    fobicodam ISPConfig Developer

    Ill test it.. is there any chance to a windows version? im starting to migrate all my linux based server to microsoft plataform and i want to keep the user interface.

    I have a own developed SMTP/POP3 server if you want to make it.
     
  7. guardian

    guardian Member

    I have a problem, Debian 4.0 (32 bit) under OpenVZ. The upgrade didn't finish and when I start ./setup again it doesn't detect ISPConfig 2.13 and goes for fresh install

    When I try to start ISPConfig I get some errors:

    /etc/init.d/ispconfig_server start
    Starting ISPConfig system...
    /etc/init.d/ispconfig_server: line 45: /root/ispconfig/httpd/bin/apachectl: No such file or directory
    /etc/init.d/ispconfig_server: line 47: /root/ispconfig/php/php: No such file or directory
    FreshClam is already running!
    ISPConfig system is now up and running!
     
  8. till

    till Super Moderator

    Please run:

    mkdir /root/ispconfig

    and then unpack the ISPConfig installer again and run the setup script. Make sure that you have enough space in /root (approx. 200 MB) and the same amount in /tmp.
     
  9. till

    till Super Moderator

    No, I dont think that we will develop such a version any time soon.
     
  10. guardian

    guardian Member

    Code:
    -------------------------------------------------
    tar: patch/util.c: Cannot change ownership to uid 10000, gid 0: Disk quota exceeded
    patch/util.h
    tar: patch/util.h: Cannot change ownership to uid 10000, gid 0: Disk quota exceeded
    patch/version.c
    tar: patch/version.c: Cannot change ownership to uid 10000, gid 0: Disk quota exceeded
    patch/version.h
    tar: patch/version.h: Cannot change ownership to uid 10000, gid 0: Disk quota exceeded
    tar: patch: Cannot change ownership to uid 10000, gid 0: Disk quota exceeded
    tar: Error exit delayed from previous errors
    make: *** No targets specified and no makefile found.  Stop.
    -------------------------------------------------
    Hint: Either try to build 'patch' under etc/patch/
    Hint: manually and re-run this 'configure' script
    Hint: or provide us the path to your vendor 'patch'
    Hint: program via the --with-patch=FILE option (but
    Hint: expect perhaps failures when applying patches!)
    ERROR: Could not configure Apache
    cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
    mv: cannot stat `binaries/aps.tar.gz': No such file or directory
    mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
    mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
    mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
    mv: cannot stat `binaries/cronolog': No such file or directory
    mv: cannot stat `binaries/cronosplit': No such file or directory
    mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
    mv: cannot stat `binaries/zip': No such file or directory
    mv: cannot stat `binaries/unzip': No such file or directory
    tar: spamassassin.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `spamassassin': No such file or directory
    tar: uudeview.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `uudeview': No such file or directory
    tar: clamav.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `clamav': No such file or directory
    tar: aps.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    ./setup2: line 873: ispconfig_tmp/php/bin/php: No such file or directory
    ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!
    
    Filesystem Size Used Avail Use% Mounted on
    /dev/simfs 101G 1.7G 99G 2% /
    tmpfs 504M 0 504M 0% /lib/init/rw
    tmpfs 504M 0 504M 0% /dev/shm
     
  11. jnsc

    jnsc rotaredoM

    The error message is clear
    Have a look at your quota.
     
  12. till

    till Super Moderator

    The error message is clear, your disk quota was exceeded during compilation, even if your filesystem usage output shows something different.

    Did you run the script as root user and wnot via sudo?
    Is this a vserver?
     
  13. guardian

    guardian Member

    I run it with normal user via su, root is disabled in ssh_config
    It is not vserver, it is OpenVZ.
    I really have no idea where to look for quota.
     
  14. till

    till Super Moderator

    If you run it in OpenVZ, then it is a vserver and you reached one of the limits that you set in OpenVZ.

    Have a look here on how to find out which resource limit you hit:

    http://wiki.openvz.org/Resource_shortage
     
  15. guardian

    guardian Member

    Everything looks normal to me:

    Code:
    cat /proc/user_beancounters
    Version: 2.5
           uid  resource           held    maxheld    barrier      limit    failcnt
          101:  kmemsize        3579010    4213024   16384000   18022400          0
                lockedpages           0          0       4096       4096          0
                privvmpages       82264      91038     131072     131072          0
                shmpages            640        976     131072     131072          0
                dummy                 0          0          0          0          0
                numproc              79         92        400        400          0
                physpages         10797      12732          0 2147483647          0
                vmguarpages           0          0       6144 2147483647          0
                oomguarpages      10797      12732       6144 2147483647          0
                numtcpsock           16         22        500        500          0
                numflock             15         17        200        220          0
                numpty                1          1         64         64          0
                numsiginfo            0          3        512        512          0
                tcpsndbuf        182040     219952    5365760   10485760          0
                tcprcvbuf        262144     262144    5365760   10485760          0
                othersockbuf     184260     212256    1503232    4063232          0
                dgramrcvbuf           0       8364     262144     262144          0
                numothersock        132        138        500        500          0
                dcachesize            0          0    4194304    4317184          0
                numfile            1849       2102       8192       8192          0
                dummy                 0          0          0          0          0
                dummy                 0          0          0          0          0
                dummy                 0          0          0          0          0
                numiptent            34         34        128        128          0
    
    Code:
    Filesystem           1K-blocks      Used Available Use% Mounted on
    /dev/simfs           104857700   1760228 103097472   2% /
    tmpfs                   515836         0    515836   0% /lib/init/rw
    tmpfs                   515836         0    515836   0% /dev/shm
    root@eowyn:~# df -i
    Filesystem            Inodes   IUsed   IFree IUse% Mounted on
    /dev/simfs           18294175   54334 18239841    1% /
    tmpfs                 128959       2  128957    1% /lib/init/rw
    tmpfs                 128959       1  128958    1% /dev/shm
    root@eowyn:~#
    
    Btw there wasn't any problem when I upgrade from 2.2.12 to 2.2.13 and there isn't any changes to the server since then
     
    Last edited: Jun 19, 2007
  16. guardian

    guardian Member

    I remove second level quota - QUOTAUGIDLIMIT="100" in vps config file, reboot the system and successfully upgrade to 2.2.14.
    Is it enough to put back QUOTAUGIDLIMIT in config file to use quota again.
     
  17. Check

    Check New Member

    I have 2.2.12 installed, do i need to install .13 before i install .14?

    I tried to install the new version and i got this

    Code:
    make: *** [build_apps] Error 1
    ERROR: Could not make OpenSSL
    cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
    mv: cannot stat `binaries/aps.tar.gz': No such file or directory
    mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
    mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
    mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
    mv: cannot stat `binaries/cronolog': No such file or directory
    mv: cannot stat `binaries/cronosplit': No such file or directory
    mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
    mv: cannot stat `binaries/zip': No such file or directory
    mv: cannot stat `binaries/unzip': No such file or directory
    tar: spamassassin.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `spamassassin': No such file or directory
    tar: uudeview.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `uudeview': No such file or directory
    tar: clamav.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `clamav': No such file or directory
    tar: aps.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    ./setup2: line 873: ispconfig_tmp/php/bin/php: No such file or directory
    ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!
    Help?
     
  18. testset

    testset New Member

    thanks for my requested feature: user cannot change domain

    but i thought something like this:
    user 'peter' -> Domain peteriscool.com
    user 'petra' -> Domain petra.domain.tld

    Now 'peter' should only have right for creating subdomains for peteriscool.com
    'petra' should only have rights for creating subdomains for petra.domain.tld
    and so on.

    Stupid: User can creates again own Weburls, f.e. google.com oder hacked.myserver.tld - and more funny: he has no rights for delete his own subdomains/domains.

    nah ok, now i will create the subdomains for my users via hand and ispconfig - at the moment i have not much users and i can do this - but in future - i don't know. ;-)


    Great work again, but i have a "probleme" which doesn't do anything (not all tested yet):

    OS: GNU/Linux Debian Sarge + Upgrade to Etch
    Kernel (isp-kernel-info): linux-whatever-2 (it is a provider compiled kernel)
     
  19. till

    till Super Moderator

    You are talking about subdomains, subdomains are not co-domains and we will not limit co-domains to subdomains as this will limit the overall functionality of ISPConfig.

    No, not at all. The user can not create co-domains if you do not allow him to create domains.

    You are in a non existing directory. Enter:

    cd ../

    on the shell.
     
  20. till

    till Super Moderator

    No.

    Please post the error above these lines.

    Before you try to update again, execute the following command:

    mkdir /root/ispconfig

    and then run the setup again.
     

Share This Page