ISPConfig 2.2.10 released

Discussion in 'General' started by till, Feb 20, 2007.

  1. schmidtedv

    schmidtedv New Member

    not shure, if this belongs to here, but my update from .9 to .10 is stuck. Because I'm installing the german version the line it hangs is:

    I saw messages like this in another post here before but without solution...however this is top-output:

    Code:
    top - 19:59:55 up 46 min,  2 users,  load average: 1.94, 1.87, 1.53
    Tasks:  82 total,   1 running,  81 sleeping,   0 stopped,   0 zombie
    Cpu(s):  2.3% us,  0.7% sy,  0.0% ni,  0.0% id, 97.0% wa,  0.0% hi,  0.0% si
    Mem:    255380k total,   253404k used,     1976k free,      956k buffers
    Swap:  2094112k total,      216k used,  2093896k free,   170796k cached
      PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
     3201 root      17   0  1716  624 1372 S  2.3  0.2   1:02.03 gzip
     3205 root      16   0  2064 1052 1852 R  0.3  0.4   0:00.08 top
        1 root      16   0  1504  512 1352 S  0.0  0.2   0:00.83 init
        2 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 migration/0
        3 root      34  19     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/0
        4 root       5 -10     0    0    0 S  0.0  0.0   0:02.99 events/0
        5 root       8 -10     0    0    0 S  0.0  0.0   0:00.00 khelper
        6 root      14 -10     0    0    0 S  0.0  0.0   0:00.00 kacpid
       35 root       5 -10     0    0    0 S  0.0  0.0   0:00.07 kblockd/0
       45 root      15   0     0    0    0 S  0.0  0.0   0:00.78 pdflush
       46 root      15   0     0    0    0 S  0.0  0.0   0:00.02 pdflush
       48 root       5 -10     0    0    0 S  0.0  0.0   0:00.00 aio/0
       47 root      15   0     0    0    0 S  0.0  0.0   0:00.78 kswapd0
      184 root      25   0     0    0    0 S  0.0  0.0   0:00.00 kseriod
      313 root      15   0     0    0    0 D  0.0  0.0   0:00.95 kjournald
      808 root      15   0     0    0    0 S  0.0  0.0   0:00.00 khubd
     1954 root      16   0  2260  780 2092 S  0.0  0.3   0:00.05 syslogd
    
    and this ps aux:

    Code:
    USER       PID %CPU %MEM   VSZ  RSS TTY      STAT START   TIME COMMAND
    root         1  0.0  0.2  1504  512 ?        S    19:13   0:00 init [2]
    root         2  0.0  0.0     0    0 ?        S    19:13   0:00 [migration/0]
    root         3  0.0  0.0     0    0 ?        SN   19:13   0:00 [ksoftirqd/0]
    root         4  0.1  0.0     0    0 ?        S<   19:13   0:02 [events/0]
    root         5  0.0  0.0     0    0 ?        S<   19:13   0:00 [khelper]
    root         6  0.0  0.0     0    0 ?        S<   19:13   0:00 [kacpid]
    root        35  0.0  0.0     0    0 ?        S<   19:13   0:00 [kblockd/0]
    root        45  0.0  0.0     0    0 ?        S    19:13   0:00 [pdflush]
    root        46  0.0  0.0     0    0 ?        S    19:13   0:00 [pdflush]
    root        48  0.0  0.0     0    0 ?        S<   19:13   0:00 [aio/0]
    root        47  0.0  0.0     0    0 ?        S    19:13   0:00 [kswapd0]
    root       184  0.0  0.0     0    0 ?        S    19:13   0:00 [kseriod]
    root       313  0.0  0.0     0    0 ?        D    19:14   0:00 [kjournald]
    root       808  0.0  0.0     0    0 ?        S    19:14   0:00 [khubd]
    root      1954  0.0  0.3  2260  780 ?        Ss   19:15   0:00 /sbin/syslogd -a
    root      1957  0.0  0.5  2384 1492 ?        Ss   19:15   0:00 /sbin/klogd
    postgrey  1972  0.0  3.0 10608 7728 ?        Ss   19:15   0:00 /usr/sbin/postgre
    root      1977  0.0  0.1  1672  476 ?        S    19:15   0:00 /usr/sbin/courier
    root      1978  0.0  0.1  1808  508 ?        S    19:15   0:00 /usr/lib/courier/
    root      1980  0.0  0.1  1808  508 ?        S    19:15   0:00 /usr/lib/courier/
    root      1981  0.0  0.1  1808  508 ?        S    19:15   0:00 /usr/lib/courier/
    root      1982  0.0  0.1  1808  508 ?        S    19:15   0:00 /usr/lib/courier/
    root      1983  0.0  0.1  1808  508 ?        S    19:15   0:00 /usr/lib/courier/
    root      1984  0.0  0.1  1808  508 ?        S    19:15   0:00 /usr/lib/courier/
    root      1989  0.0  0.2  2476  728 ?        S    19:15   0:00 /usr/sbin/courier
    root      1991  0.0  0.1  1544  304 ?        S    19:15   0:00 /usr/sbin/courier
    root      2002  0.0  0.2  2476  728 ?        S    19:15   0:00 /usr/sbin/courier
    root      2004  0.0  0.1  1544  304 ?        S    19:15   0:00 /usr/sbin/courier
    root      2010  0.0  0.2  2476  728 ?        S    19:15   0:00 /usr/sbin/courier
    root      2013  0.0  0.1  1540  300 ?        S    19:15   0:00 /usr/sbin/courier
    root      2023  0.0  0.2  2476  728 ?        S    19:15   0:00 /usr/sbin/courier
    root      2025  0.0  0.1  1540  300 ?        S    19:15   0:00 /usr/sbin/courier
    root      2029  0.0  2.1  7552 5372 ?        D    19:15   0:02 python /usr/bin/d
    root      2034  0.0  0.1  1496  444 ?        Ss   19:15   0:00 /usr/sbin/inetd
    root      2243  0.0  0.6  6556 1580 ?        Ss   19:15   0:00 /usr/sbin/saslaut
    root      2244  0.0  0.6  6556 1580 ?        S    19:15   0:00 /usr/sbin/saslaut
    root      2245  0.0  0.6  6556 1580 ?        S    19:15   0:00 /usr/sbin/saslaut
    root      2246  0.0  0.6  6556 1580 ?        S    19:15   0:00 /usr/sbin/saslaut
    root      2247  0.0  0.6  6556 1580 ?        S    19:15   0:00 /usr/sbin/saslaut
    root      2253  0.0  0.5  3468 1504 ?        Ss   19:15   0:00 /usr/sbin/sshd
    root      2258  0.0  0.2  1912  656 ?        Ss   19:15   0:00 /usr/bin/rsync --
    daemon    2271  0.0  0.2  1684  628 ?        Ss   19:15   0:00 /usr/sbin/atd
    root      2274  0.0  0.3  1764  816 ?        Ss   19:15   0:00 /usr/sbin/cron
    root      2342  0.0  3.8 22980 9732 ?        Ss   19:16   0:01 /usr/sbin/apache2
    root      2343  0.0  0.1  1616  432 ?        S    19:16   0:00 /root/ispconfig/c
    www-data  2443  0.1  5.2 26068 13384 ?       S    19:16   0:03 /usr/sbin/apache2
    root      2451  0.0  0.5  3668 1332 ?        Ss   19:16   0:00 /usr/lib/postfix/
    postfix   2457  0.0  0.4  2976 1096 ?        S    19:16   0:00 pickup -l -t fifo
    postfix   2458  0.0  0.4  3008 1124 ?        S    19:16   0:00 qmgr -l -t fifo -
    bind      2470  0.0  1.0 29436 2652 ?        Ss   19:16   0:00 /usr/sbin/named -
    nobody    2483  0.0  0.9  4772 2300 ?        Ss   19:16   0:00 proftpd: (accepti
    root      2504  0.0  0.1  1500  484 tty1     Ss+  19:16   0:00 /sbin/getty 38400
    root      2510  0.0  0.1  1500  484 tty2     Ss+  19:16   0:00 /sbin/getty 38400
    root      2511  0.0  0.1  1500  484 tty3     Ss+  19:16   0:00 /sbin/getty 38400
    root      2512  0.0  0.1  1500  484 tty4     Ss+  19:16   0:00 /sbin/getty 38400
    root      2513  0.0  0.1  1500  484 tty5     Ss+  19:16   0:00 /sbin/getty 38400
    root      2514  0.0  0.1  1500  484 tty6     Ss+  19:16   0:00 /sbin/getty 38400
    www-data  2579  0.1  5.2 25992 13308 ?       S    19:16   0:02 /usr/sbin/apache2
    www-data  2588  0.0  5.1 25884 13184 ?       S    19:16   0:01 /usr/sbin/apache2
    www-data  2607  0.0  5.1 25952 13264 ?       S    19:18   0:02 /usr/sbin/apache2
    root      2610  0.0  0.9 14604 2348 ?        Ss   19:18   0:00 sshd: [EMAIL="root@notty"]root@notty[/EMAIL]
    root      2613  0.0  0.4  3188 1076 ?        Ss   19:18   0:00 /usr/lib/sftp-ser
    www-data  2862  0.2  5.2 26064 13372 ?       S    19:21   0:06 /usr/sbin/apache2
    www-data  2864  0.1  5.2 25996 13300 ?       S    19:21   0:04 /usr/sbin/apache2
    www-data  2873  0.1  5.1 25892 13200 ?       S    19:23   0:02 /usr/sbin/apache2
    www-data  2892  0.1  5.2 26056 13364 ?       S    19:30   0:02 /usr/sbin/apache2
    www-data  2893  0.0  3.8 23200 9944 ?        S    19:31   0:00 /usr/sbin/apache2
    www-data  2894  0.0  5.1 25876 13164 ?       S    19:31   0:00 /usr/sbin/apache2
    root      2952  0.0  0.9 14452 2304 ?        Ss   19:41   0:00 sshd: [EMAIL="root@pts/0"]root@pts/0[/EMAIL]
    root      2955  0.0  0.6  3060 1644 pts/0    Ss   19:41   0:00 -bash
    root      2980  0.0  0.4  2736 1232 pts/0    S+   19:48   0:00 /bin/sh ./setup
    root      2982  0.0  0.5  2768 1312 pts/0    S+   19:48   0:00 /bin/bash ./setup
    root      3002  0.0  0.5  2844 1408 pts/0    S+   19:48   0:00 /bin/bash ./setup
    root      3091  0.0  0.5  2772 1320 pts/0    S+   19:48   0:00 /bin/sh /usr/bin/
    root      3127  0.0  0.5  2772 1324 pts/0    S+   19:48   0:00 /bin/sh /usr/bin/
    mysql     3128  0.0  5.7 116676 14732 pts/0  S+   19:48   0:00 /usr/sbin/mysqld
    root      3129  0.0  0.2  1808  548 pts/0    S+   19:48   0:00 logger -p daemon.
    root      3191  0.0  0.9 14452 2304 ?        Ss   19:48   0:00 sshd: [EMAIL="root@pts/1"]root@pts/1[/EMAIL]
    root      3194  0.0  0.6  3060 1644 pts/1    Ss   19:49   0:00 -bash
    root      3200  0.4  0.4  2408 1056 pts/0    S+   19:50   0:02 tar -pczf home_ad
    root      3201 10.7  0.2  1716  624 pts/0    D+   19:50   1:06 gzip
    root      3212  0.0  0.3  2496  844 pts/1    R+   20:00   0:00 ps aux
    
    in this stadium...is it safe just to reboot the server and wait for a possible solution or should the server stay like this? I did a reboot once already and it didn't seem to harm the system, but I'm not shure, what's going wrong....
     
  2. till

    till Super Moderator

    Just press [ctrl] + c to get the prompt back. Rebooting is not nescessary. Then execute the command:

    df -h

    and post the output.
     
  3. schmidtedv

    schmidtedv New Member

    well, output is (afer i already did the reboot :) ):

    Code:
    Dateisystem          Größe Benut  Verf Ben% Eingehängt auf
    /dev/hda1             7,5G  2,0G  5,1G  29% /
    tmpfs                 125M     0  125M   0% /dev/shm
    
     
  4. schmidtedv

    schmidtedv New Member

    ...maybe there went something wrong or changed differently then expected with my last apt-get upgrade?
     
  5. falko

    falko Super Moderator

    Seems to be a problem with gzip.
    How long did you wait?
     
  6. schmidtedv

    schmidtedv New Member

    about 15 min....the last Updates started right away, that's why I'm so confused...my second server, the one at home did the update perfectly in time....hmhm. However, if I would start a 4th try....would there be anything from the last update-starts I would have to delete or so? maybe some temp-files?

    And how long should I wait for the update before stopping?
     
  7. schmidtedv

    schmidtedv New Member

    ...maybe, maybe not, but I finally got it started!

    I took another look in "top" right after reboot, because phpSysInfo told me that memory is used by 97%...although the kernel does this after a while, I was thinking that this is the point with only 256MB at all???

    However, I stopped postgrey, because this was beside mysqld the main memory-user and restartet ./setup again...after 2min. waiting on the same "...wird vorbereitet"-screen it went on.

    My System has 2 domains running with a compaq 700MHZ PIII, 10GB, 256MB...is there anything I could increase performance or is this system fine like it is?

    Actually, gzip takes at the beginning of the setup (changing a couple times in "top") nearly 90% cpu....


    ....a small question on the end: is it a security risk to leave the files include_path in php.ini for phpSysInfo on "." or should I comment that out again?
     
  8. till

    till Super Moderator

    ISPConfig needs to unpack about 30 MB of files, this may increase the load for a short time during installation. But thas normally not a problem.

    The include path should contain ".", otherwise relative includes wont work anymore.
     
  9. schmidtedv

    schmidtedv New Member

    So, because it wasn't like this in original php.ini (/etc/php4/apache2/php.ini), it would be correct to do it this way:

    Code:
    [SIZE=1]
    ;;;;;;;;;;;;;;;;;;;;;;;;;
    ; Paths and Directories ;
    ;;;;;;;;;;;;;;;;;;;;;;;;;
    ; UNIX: "/path1:/path2" 
    ;include_path = ".:/usr/share/php"
    [COLOR=red]include_path = "."[/COLOR]
    ;
    ; Windows: "\path1;\path2"
    ;include_path = ".;c:\php\includes"
    [/SIZE]
    ??

    With the serverload I have to figure out what's slowing him down...are there some programs that would be usefull to check what's maybe going on with memory or maybe even with network-traffic (maybe there are to many bots or what else...)
     
  10. celtic

    celtic New Member


    Same problem here. Need help. I will not panic and will wait for your solution:

    ./setup2: line 860: ispconfig_tmp/php/bin/php: No such file or directory
    ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!


    root@jfo:/# apt-cache search libmysqlclient
    libmysqlclient10 - LGPL-licensed client library for MySQL databases
    libmysqlclient10-dev - LGPL-licensed client development files for MySQL databases
    libmysqlclient12 - mysql database client library
    libmysqlclient12-dev - mysql database development files
    libmysqlclient14 - mysql database client library
    libmysqlclient14-dev - mysql database development files
    libmysqlclient15-dev - mysql database development files
    libmysqlclient15off - mysql database client library


    PS: Upgrade from 8 to 9 went smoothly... nothing was touched in mysql and now this happened.
     
  11. till

    till Super Moderator

    Which mysqlversion do you have installed? 4.0.x, 4.1.x or 5.x?
     
  12. celtic

    celtic New Member

    PHP Version 5.1.2

    System Linux jfo.nortenet.pt 2.6.15-23-server #1 SMP Tue May 23 15:10:35 UTC 2006 i686
    Build Date Jul 18 2006 23:55:22
    Server API Apache 2.0 Handler
    Virtual Directory Support disabled
    Configuration File (php.ini) Path /etc/php5/apache2/php.ini
    PHP API 20041225
    PHP Extension 20050922
    Zend Extension 220051025
    Debug Build no
    Thread Safety disabled
    Zend Memory Manager enabled
    IPv6 Support enabled
    Registered PHP Streams php, file, http, ftp, compress.bzip2, compress.zlib, https, ftps
    Registered Stream Socket Transports tcp, udp, unix, udg, ssl, sslv3, sslv2, tls
    Registered Stream Filters string.rot13, string.toupper, string.tolower, string.strip_tags, convert.*, convert.iconv.*, bzip2.*, zlib.*
     
  13. till

    till Super Moderator

    I need to know the mysql version, not the PHP version. Please exceute the following command and post the output:

    mysqld -V
     
  14. celtic

    celtic New Member

    I am very sorry about this nonsense. To many things at the same time:

    mysqld Ver 5.0.22-Debian_0ubuntu6.06-log for pc-linux-gnu on i486 (Debian Etch distribution)

    Thanks
     
  15. till

    till Super Moderator

    Plese execute:

    apt-get install libmysqlclient15-dev

    and then:

    mkdir /root/ispconfig

    and then unpack and run the ISPConfig setup script again.
     
  16. schmidtedv

    schmidtedv New Member

    ...ähm...just a short hint, if I edited the right php.ini and the right part of it for the mentioned include_path?? :)
     
  17. till

    till Super Moderator

    If you want to know which php.ini is used by your PHP, make a script which includes the function phpini();, which shows the path to the php.ini.
     
  18. celtic

    celtic New Member

    Still no progress... please give me a hint.

    Thanks


    RC4_CHUNK is undefined
    make: Warning: File `Makefile.org' has modification time 1.4e+08 s in the future
    Makefile is older than Makefile.org, Configure or config.
    Reconfigure the source tree (via './config' or 'perl Configure'), please.
    make: *** [Makefile] Error 1
    make: Warning: File `Makefile.org' has modification time 1.4e+08 s in the future
    Makefile is older than Makefile.org, Configure or config.
    Reconfigure the source tree (via './config' or 'perl Configure'), please.
    make: *** [Makefile] Error 1
    ERROR: Could not make OpenSSL
    cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
    mv: cannot stat `binaries/aps.tar.gz': No such file or directory
    mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
    mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
    mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
    mv: cannot stat `binaries/cronolog': No such file or directory
    mv: cannot stat `binaries/cronosplit': No such file or directory
    mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
    mv: cannot stat `binaries/zip': No such file or directory
    mv: cannot stat `binaries/unzip': No such file or directory
    tar: spamassassin.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `spamassassin': No such file or directory
    tar: uudeview.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `uudeview': No such file or directory
    tar: clamav.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `clamav': No such file or directory
    tar: aps.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    ./setup2: line 860: ispconfig_tmp/php/bin/php: No such file or directory
    ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!
     
  19. till

    till Super Moderator

    This time the compilation failed because your system time is wrong. Plaese execute:

    ntpdate pool.ntp.org

    to correct your system time or set it manually to the correct time and date. Then execute:

    mkdir /root/ispconfig

    and run the setup again.
     
  20. celtic

    celtic New Member

    Thanks, this time the update went well and smoth as 2.8 -> 2.9.

    However I cannot access https://212.13.41.2:81 so I dont have the control panel.

    Any Ideas?

    Network Access Message: The page cannot be displayed

    Technical Information (for Support personnel)
    Error Code: 502 Proxy Error. Connection refused(10061)
    IP Address: 212.13.41.2
    Date: 24-02-2007 13:59:27 [GMT]
    Server: afonso.JFO.local
    Source: proxy
     

Share This Page