install ispconfig at home behind router

Discussion in 'Installation/Configuration' started by kw1234, Aug 21, 2019.

  1. kw1234

    kw1234 New Member

    ispconfig last version on ubuntu 18.04lts server
    i try to install ispconfig in to my local pc server, it look success but domain can not work. the server work only local network


    someone have a solution
    thank
     
    Last edited: Sep 1, 2019
  2. ahrasis

    ahrasis Well-Known Member

    I have been running ISPConfig servers behind router at home for almost 7 years. The trick is simply to port forward all needed ports to your server local (fixed) ip.

    Just to ponder, home ip is normally dynamic as it most of the time changes when you reboot your router, so you may need a solution to update your domain ip at your dns server.
     
  3. kw1234

    kw1234 New Member

    thank, ahrasis
    do i need to open all of this port

    10026
    10027
    587
    11211
    110
    143
    465
    53
    53
    21
    53
    22
    953
    25
    993
    995
    10023
    10024
    10025
    10026
    3306
    587
    10
    43
    8080
    80
    8081
    465
    53
    21
    22
    953
    25
    443
    993
    995
    10024
    9000
     
    Last edited: Aug 22, 2019
  4. ahrasis

    ahrasis Well-Known Member

    Forward only the ports that you need access from external to your server and some of these ports are listed here: https://www.faqforge.com/linux/whic...g-3-server-and-shall-be-open-in-the-firewall/.

    As stated in there, if you don't access mysql from external source, you do not need to open it or even forward it to your server, especially if yours is a single server setup.

    The same applies to other ports such as ftp ports 20-21 if you want to use webftp, port 53 (tcp and udp) if you do not tun uour own dns server and email ports if you don't use email services.

    Do note that port 25 is normally closed by ISP so running a full mail server may not be possible too for home server.

    Other than if needed or used ports above, I think mainly you need to forward to your server port 22, 80, 443, 8080 and 8081.
     

Share This Page