[INFO] service Rspamd not detected

Discussion in 'ISPConfig 3 Priority Support' started by albertf, Oct 5, 2019.

  1. albertf

    albertf Member HowtoForge Supporter

    I wanted to get the perfect install !!!
    I made a new fresh install, but i have got something strange !
    Step 21 Install ISPConfig :
    2 lignes have been added if I compare with the tutorial
    Code:
    Creating new DHParams file, this takes several minutes. Do not interrupt the script.
    [INFO] service Rspamd not detected
    Code:
    Email Address []:
    Configuring Mailman
    Configuring Dovecot
    Creating new DHParams file, this takes several minutes. Do not interrupt the script.
    Configuring Spamassassin
    Configuring Amavisd
    [INFO] service Rspamd not detected
    Configuring Getmail
    Configuring Jailkit
    Configuring Pureftpd
    Configuring BIND
    Configuring Apache
    Configuring vlogger
    [INFO] service OpenVZ not detected
    Configuring Ubuntu Firewall
    [INFO] service Metronome XMPP Server not detected
    Configuring Fail2ban
    Configuring Apps vhost
    Installing ISPConfig
    ISPConfig Port [8080]:
    If I check Rspamd after the install I get this :
    Code:
    [email protected]:~# systemctl status rspamd
    Unit rspamd.service could not be found.
    
    
    Can we solve ? or I need one more fresh install ?
    Thanks
     
  2. Croydon

    Croydon ISPConfig Developer ISPConfig Developer

  3. till

    till Super Moderator Staff Member ISPConfig Developer

    Then follow the perfect server tutorial.

    That's ok and as it should be as the guides use amavisd, so rspamd is and should not be installed in this guide. ISPConfig supports different alternative software for various purposes, so you will and shall not have all alternatives installed at the same time. If you want to switch from amavisd to rspamd, which is optional, then follow the guide that @Croydon posted.
     
  4. albertf

    albertf Member HowtoForge Supporter

    No that's fine, just wanted to know if I have done something wrong because it was not in the tutorial list.
    I did it and now I am not so far :p I didn't get any error during the install except with Jailkit :
    Code:
    jk_socketd.c:121:2: warning: ‘strncpy’ specified bound 108 equals destination size [-Wstringop-truncation]
      strncpy(serv_addr.sun_path, sl->inpath, sizeof(serv_addr.sun_path));
    Code:
    jk_lsh.c:240:10: warning: variable ‘oldumask’ set but not used [-Wunused-but-set-variable]
       mode_t oldumask;
    Code:
    jk_lsh.c:128:14: warning: ‘strncpy’ output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation]
        newpath = strncpy(newpath, *path, tlen);
    Code:
    dh_testdir
    dh_testroot
    dh_installchangelogs
    dh_installchangelogs: warning:     debian/changelog(l9): badly formatted heading line
    LINE: -- Olivier <[email protected]>  Wed, 18 Nov 2015 20:38:44 +0100
    dh_installchangelogs: warning:     debian/changelog(l11): found start of entry where expected more change data or trailer
    LINE: jailkit (2.18-1) UNRELEASED; urgency=medium
    dh_installchangelogs: warning:     debian/changelog(l11): found end of file where expected more change data or trailer
    And more
    errors below in the full code...
    I followed the tutorial but I get these errors :
     
  5. albertf

    albertf Member HowtoForge Supporter

    Code:
    [email protected]:/tmp# cd jailkit-2.20
    [email protected]:/tmp/jailkit-2.20# echo 5 > debian/compat
    [email protected]:/tmp/jailkit-2.20# ./debian/rules binary
    dh_testdir
    # Here the commands to configure the package.
    CFLAGS="-Wall -g -O2" ./configure --host=x86_64-linux-gnu --build=x86_64-linux-gnu --prefix=/usr --sysconfdir=/etc --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info
    checking for x86_64-linux-gnu-gcc... x86_64-linux-gnu-gcc
    checking whether the C compiler works... yes
    checking for C compiler default output file name... a.out
    checking for suffix of executables...
    checking whether we are cross compiling... no
    checking for suffix of object files... o
    checking whether we are using the GNU C compiler... yes
    checking whether x86_64-linux-gnu-gcc accepts -g... yes
    checking for x86_64-linux-gnu-gcc option to accept ISO C89... none needed
    checking how to run the C preprocessor... x86_64-linux-gnu-gcc -E
    checking for grep that handles long lines and -e... /usr/bin/grep
    checking for egrep... /usr/bin/grep -E
    checking for ANSI C header files... yes
    checking for sys/types.h... yes
    checking for sys/stat.h... yes
    checking for stdlib.h... yes
    checking for string.h... yes
    checking for memory.h... yes
    checking for strings.h... yes
    checking for inttypes.h... yes
    checking for stdint.h... yes
    checking for unistd.h... yes
    checking minix/config.h usability... no
    checking minix/config.h presence... no
    checking for minix/config.h... no
    checking whether it is safe to define __EXTENSIONS__... yes
    checking for x86_64-linux-gnu-gcc... (cached) x86_64-linux-gnu-gcc
    checking whether we are using the GNU C compiler... (cached) yes
    checking whether x86_64-linux-gnu-gcc accepts -g... (cached) yes
    checking for x86_64-linux-gnu-gcc option to accept ISO C89... (cached) none needed
    checking for library containing strerror... none required
    checking for inline... inline
    checking for a BSD-compatible install... /usr/bin/install -c
    checking for ANSI C header files... (cached) yes
    checking errno.h usability... yes
    checking errno.h presence... yes
    checking for errno.h... yes
    checking stdio.h usability... yes
    checking stdio.h presence... yes
    checking for stdio.h... yes
    checking ctype.h usability... yes
    checking ctype.h presence... yes
    checking for ctype.h... yes
    checking getopt.h usability... yes
    checking getopt.h presence... yes
    checking for getopt.h... yes
    checking math.h usability... yes
    checking math.h presence... yes
    checking for math.h... yes
    checking time.h usability... yes
    checking time.h presence... yes
    checking for time.h... yes
    checking sys/socket.h usability... yes
    checking sys/socket.h presence... yes
    checking for sys/socket.h... yes
    checking pthread.h usability... yes
    checking pthread.h presence... yes
    checking for pthread.h... yes
    checking pwd.h usability... yes
    checking pwd.h presence... yes
    checking for pwd.h... yes
    checking wordexp.h usability... yes
    checking wordexp.h presence... yes
    checking for wordexp.h... yes
    checking liberty.h usability... no
    checking liberty.h presence... no
    checking for liberty.h... no
    checking for strings.h... (cached) yes
    checking for strnlen... yes
    checking for wordexp... yes
    checking for clearenv... yes
    checking for get_current_dir_name... yes
    checking for strndup... yes
    checking for mempcpy... yes
    checking for stpcpy... yes
    checking for pthread support... use -pthread
    checking for recvfrom... yes
    checking for send... yes
    checking for nanosleep... yes
    checking for getopt_long... yes
    checking sys/capability.h usability... no
    checking sys/capability.h presence... no
    checking for sys/capability.h... no
    checking for cap_get_proc... no
    checking for cap_get_proc in -lcap... no
    checking for python... /usr/bin/python
    checking for up to date python... checking for up to date python... ok
    checking for procmail... no
    configure: creating ./config.status
    config.status: creating Makefile
    config.status: creating src/Makefile
    config.status: creating py/Makefile
    config.status: creating man/Makefile
    config.status: creating src/config.h
    # Here the commands to compile the arch part of the package.
    /usr/bin/make
    make[1]: Entering directory '/tmp/jailkit-2.20'
    make[2]: Entering directory '/tmp/jailkit-2.20/src'
    x86_64-linux-gnu-gcc -Wall -g -O2 -pthread -DINIPREFIX=\"/etc/jailkit\"   -c -o jk_socketd.o jk_socketd.c
    jk_socketd.c: In function ‘new_socketlink’:
    jk_socketd.c:121:2: warning: ‘strncpy’ specified bound 108 equals destination size [-Wstringop-truncation]
      strncpy(serv_addr.sun_path, sl->inpath, sizeof(serv_addr.sun_path));
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    x86_64-linux-gnu-gcc -Wall -g -O2 -pthread -DINIPREFIX=\"/etc/jailkit\"   -c -o jk_lib.o jk_lib.c
    x86_64-linux-gnu-gcc -Wall -g -O2 -pthread -DINIPREFIX=\"/etc/jailkit\"   -c -o utils.o utils.c
    x86_64-linux-gnu-gcc -Wall -g -O2 -pthread -DINIPREFIX=\"/etc/jailkit\"   -c -o iniparser.o iniparser.c
    x86_64-linux-gnu-gcc  -o jk_socketd jk_socketd.o jk_lib.o utils.o iniparser.o -pthread
    x86_64-linux-gnu-gcc -Wall -g -O2 -pthread -DINIPREFIX=\"/etc/jailkit\"   -c -o jk_lsh.o jk_lsh.c
    jk_lsh.c: In function ‘main’:
    jk_lsh.c:240:10: warning: variable ‘oldumask’ set but not used [-Wunused-but-set-variable]
       mode_t oldumask;
              ^~~~~~~~
    In function ‘expand_executable_w_path’,
        inlined from ‘main’ at jk_lsh.c:273:8:
    jk_lsh.c:128:14: warning: ‘strncpy’ output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation]
        newpath = strncpy(newpath, *path, tlen);
                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    jk_lsh.c: In function ‘main’:
    jk_lsh.c:125:15: note: length computed here
        int tlen = strlen(*path);
                   ^~~~~~~~~~~~~
    In function ‘expand_executable_w_path’,
        inlined from ‘main’ at jk_lsh.c:273:8:
    jk_lsh.c:133:14: warning: ‘strncat’ output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation]
        newpath = strncat(newpath, executable, elen);
                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    jk_lsh.c: In function ‘main’:
    jk_lsh.c:122:14: note: length computed here
       int elen = strlen(executable);
                  ^~~~~~~~~~~~~~~~~~
     
  6. albertf

    albertf Member HowtoForge Supporter

    Code:
    x86_64-linux-gnu-gcc -Wall -g -O2 -pthread -DINIPREFIX=\"/etc/jailkit\"   -c -o wordexp.o wordexp.c
    x86_64-linux-gnu-gcc  -o jk_lsh jk_lsh.o iniparser.o jk_lib.o utils.o wordexp.o -pthread
    x86_64-linux-gnu-gcc -Wall -g -O2 -pthread -DINIPREFIX=\"/etc/jailkit\"   -c -o jk_chrootsh.o jk_chrootsh.c
    x86_64-linux-gnu-gcc -Wall -g -O2 -pthread -DINIPREFIX=\"/etc/jailkit\"   -c -o passwdparser.o passwdparser.c
    x86_64-linux-gnu-gcc  -o jk_chrootsh jk_chrootsh.o iniparser.o jk_lib.o utils.o passwdparser.o -pthread
    x86_64-linux-gnu-gcc -Wall -g -O2 -pthread -DINIPREFIX=\"/etc/jailkit\"   -c -o jk_chrootlaunch.o jk_chrootlaunch.c
    x86_64-linux-gnu-gcc  -o jk_chrootlaunch jk_chrootlaunch.o jk_lib.o utils.o -pthread
    x86_64-linux-gnu-gcc -Wall -g -O2 -pthread -DINIPREFIX=\"/etc/jailkit\"   -c -o jk_uchroot.o jk_uchroot.c
    x86_64-linux-gnu-gcc  -o jk_uchroot jk_uchroot.o iniparser.o jk_lib.o utils.o -pthread
    make[2]: Leaving directory '/tmp/jailkit-2.20/src'
    make[2]: Entering directory '/tmp/jailkit-2.20/py'
    sed -e "s!PREFIX='/usr'!PREFIX='/usr'!" \
        -e "s!INIPREFIX='/etc/jailkit'!INIPREFIX='/etc/jailkit'!" \
        -e "s!LIBDIR='[a-z/]*'!LIBDIR='/usr/share/jailkit'!" \
        -e "s!EXEPREFIX='[a-z/]*'!EXEPREFIX='/usr'!" \
        -e "s:#!/usr/bin/python:#!/usr/bin/python:" < jk_cp.in > jk_cp
    sed -e "s!PREFIX='/usr'!PREFIX='/usr'!" \
        -e "s!INIPREFIX='/etc/jailkit'!INIPREFIX='/etc/jailkit'!" \
        -e "s!LIBDIR='[a-z/]*'!LIBDIR='/usr/share/jailkit'!" \
        -e "s!EXEPREFIX='[a-z/]*'!EXEPREFIX='/usr'!" \
        -e "s:#!/usr/bin/python:#!/usr/bin/python:" < jk_init.in > jk_init
    sed -e "s!PREFIX='/usr'!PREFIX='/usr'!" \
        -e "s!INIPREFIX='/etc/jailkit'!INIPREFIX='/etc/jailkit'!" \
        -e "s!LIBDIR='[a-z/]*'!LIBDIR='/usr/share/jailkit'!" \
        -e "s!EXEPREFIX='[a-z/]*'!EXEPREFIX='/usr'!" \
        -e "s:#!/usr/bin/python:#!/usr/bin/python:" < jk_check.in > jk_check
    sed -e "s!PREFIX='/usr'!PREFIX='/usr'!" \
        -e "s!INIPREFIX='/etc/jailkit'!INIPREFIX='/etc/jailkit'!" \
        -e "s!LIBDIR='[a-z/]*'!LIBDIR='/usr/share/jailkit'!" \
        -e "s!EXEPREFIX='[a-z/]*'!EXEPREFIX='/usr'!" \
        -e "s:#!/usr/bin/python:#!/usr/bin/python:" < jk_addjailuser.in > jk_addjailuser
    sed -e "s!PREFIX='/usr'!PREFIX='/usr'!" \
        -e "s!INIPREFIX='/etc/jailkit'!INIPREFIX='/etc/jailkit'!" \
        -e "s!LIBDIR='[a-z/]*'!LIBDIR='/usr/share/jailkit'!" \
        -e "s!EXEPREFIX='[a-z/]*'!EXEPREFIX='/usr'!" \
        -e "s:#!/usr/bin/python:#!/usr/bin/python:" < jk_jailuser.in > jk_jailuser
    sed -e "s!PREFIX='/usr'!PREFIX='/usr'!" \
        -e "s!INIPREFIX='/etc/jailkit'!INIPREFIX='/etc/jailkit'!" \
        -e "s!LIBDIR='[a-z/]*'!LIBDIR='/usr/share/jailkit'!" \
        -e "s!EXEPREFIX='[a-z/]*'!EXEPREFIX='/usr'!" \
        -e "s:#!/usr/bin/python:#!/usr/bin/python:" < jk_list.in > jk_list
    sed -e "s!PREFIX='/usr'!PREFIX='/usr'!" \
        -e "s!INIPREFIX='/etc/jailkit'!INIPREFIX='/etc/jailkit'!" \
        -e "s!LIBDIR='[a-z/]*'!LIBDIR='/usr/share/jailkit'!" \
        -e "s!EXEPREFIX='[a-z/]*'!EXEPREFIX='/usr'!" \
        -e "s:#!/usr/bin/python:#!/usr/bin/python:" < jk_update.in > jk_update
    /usr/bin/python -c "import py_compile;py_compile.compile('jk_lib.py')"
    make[2]: Leaving directory '/tmp/jailkit-2.20/py'
    make[2]: Entering directory '/tmp/jailkit-2.20/man'
    gzip -9 < jailkit.8 > jailkit.8.gz
    gzip -9 < jk_chrootsh.8 > jk_chrootsh.8.gz
    gzip -9 < jk_uchroot.8 > jk_uchroot.8.gz
    gzip -9 < jk_lsh.8 > jk_lsh.8.gz
    gzip -9 < jk_socketd.8 > jk_socketd.8.gz
    gzip -9 < jk_init.8 > jk_init.8.gz
    gzip -9 < jk_check.8 > jk_check.8.gz
    gzip -9 < jk_cp.8 > jk_cp.8.gz
    gzip -9 < jk_chrootlaunch.8 > jk_chrootlaunch.8.gz
    gzip -9 < jk_addjailuser.8 > jk_addjailuser.8.gz
    gzip -9 < jk_jailuser.8 > jk_jailuser.8.gz
    gzip -9 < jk_list.8 > jk_list.8.gz
    gzip -9 < jk_update.8 > jk_update.8.gz
    make[2]: Leaving directory '/tmp/jailkit-2.20/man'
    make[1]: Leaving directory '/tmp/jailkit-2.20'
    touch build-arch-stamp
     
  7. albertf

    albertf Member HowtoForge Supporter

    Code:
    dh_testdir
    dh_testroot
    dh_clean -k -s
    dh_clean: Compatibility levels before 9 are deprecated (level 5 in use)
    dh_clean: -s/--same-arch is deprecated; please use -a/--arch instead
    dh_clean: This feature will be removed in compat 12.
    dh_clean: dh_clean -k is deprecated; use dh_prep instead
    dh_clean: This feature will be removed in compat 12.
    dh_installdirs -s
    dh_installdirs: Compatibility levels before 9 are deprecated (level 5 in use)
    dh_installdirs: -s/--same-arch is deprecated; please use -a/--arch instead
    dh_installdirs: This feature will be removed in compat 12.
    # Here the commands to install the arch part of the package into
    # /tmp/jailkit-2.20/debian/
    cd src && /usr/bin/make install prefix=/tmp/jailkit-2.20/debian/jailkit/usr
    make[1]: Entering directory '/tmp/jailkit-2.20/src'
    /usr/bin/install -c -d -m 755 /tmp/jailkit-2.20/debian/jailkit/usr
    /usr/bin/install -c -d -m 755 /tmp/jailkit-2.20/debian/jailkit/usr/bin
    /usr/bin/install -c -d -m 755 /tmp/jailkit-2.20/debian/jailkit/usr/sbin
    /usr/bin/install -c -m 0755 jk_socketd /tmp/jailkit-2.20/debian/jailkit/usr/sbin/
    /usr/bin/install -c -m 0755 jk_chrootlaunch /tmp/jailkit-2.20/debian/jailkit/usr/sbin/
    /usr/bin/install -c -m 0755 jk_lsh /tmp/jailkit-2.20/debian/jailkit/usr/sbin/
    /usr/bin/install -c -m 4755 jk_chrootsh /tmp/jailkit-2.20/debian/jailkit/usr/sbin/
    /usr/bin/install -c -m 4755 jk_uchroot /tmp/jailkit-2.20/debian/jailkit/usr/bin/
    if [ -z "#" ]; then \
            /usr/bin/install -c -m 4755 jk_procmailwrapper /tmp/jailkit-2.20/debian/jailkit/usr/sbin/ ;\
    fi
    make[1]: Leaving directory '/tmp/jailkit-2.20/src'
    cd man && /usr/bin/make install prefix=/tmp/jailkit-2.20/debian/jailkit/usr
    make[1]: Entering directory '/tmp/jailkit-2.20/man'
    /usr/bin/install -c -d -m 755 /tmp/jailkit-2.20/debian/jailkit/usr/share/man/man8/
    for file in jailkit.8.gz jk_chrootsh.8.gz jk_uchroot.8.gz jk_lsh.8.gz jk_socketd.8.gz jk_init.8.gz jk_check.8.gz jk_cp.8.gz jk_chrootlaunch.8.gz jk_addjailuser.8.gz jk_jailuser.8.gz jk_list.8.gz jk_update.8.gz ; do \
            /usr/bin/install -c -m 0644 ${file} /tmp/jailkit-2.20/debian/jailkit/usr/share/man/man8/ ;\
    done
    make[1]: Leaving directory '/tmp/jailkit-2.20/man'
    cd py  && /usr/bin/make install prefix=/tmp/jailkit-2.20/debian/jailkit/usr
    make[1]: Entering directory '/tmp/jailkit-2.20/py'
    /usr/bin/install -c -d -m 755 /tmp/jailkit-2.20/debian/jailkit/usr/sbin
    for file in jk_cp jk_init jk_check jk_addjailuser jk_jailuser jk_list jk_update; do \
            /usr/bin/install -c -m 0755 ${file} /tmp/jailkit-2.20/debian/jailkit/usr/sbin/ ; \
    done
    /usr/bin/install -c -d -m 755 /tmp/jailkit-2.20/debian/jailkit/usr/share/jailkit
    /usr/bin/install -c -m 0644 jk_lib.py /tmp/jailkit-2.20/debian/jailkit/usr/share/jailkit/
    /usr/bin/install -c -m 0644 jk_lib.pyc /tmp/jailkit-2.20/debian/jailkit/usr/share/jailkit/
    make[1]: Leaving directory '/tmp/jailkit-2.20/py'
    install -m 644 ini/*.ini /tmp/jailkit-2.20/debian/jailkit/etc/jailkit/
    install -m 755 extra/jailkit /tmp/jailkit-2.20/debian/jailkit/etc/init.d/
    install -m 644 debian/lintian.override /tmp/jailkit-2.20/debian/jailkit/usr/share/lintian/overrides/jailkit
    dh_install -s
    dh_install: Compatibility levels before 9 are deprecated (level 5 in use)
    dh_install: -s/--same-arch is deprecated; please use -a/--arch instead
    dh_install: This feature will be removed in compat 12.
    /usr/bin/make -f debian/rules DH_OPTIONS=-a binary-common
    make[1]: Entering directory '/tmp/jailkit-2.20'
    dh_testdir
    dh_testroot
    dh_installchangelogs
    dh_installchangelogs: warning:     debian/changelog(l9): badly formatted heading line
    LINE: -- Olivier <[email protected]>  Wed, 18 Nov 2015 20:38:44 +0100
    dh_installchangelogs: warning:     debian/changelog(l11): found start of entry where expected more change data or trailer
    LINE: jailkit (2.18-1) UNRELEASED; urgency=medium
    dh_installchangelogs: warning:     debian/changelog(l11): found end of file where expected more change data or trailer
    dh_installchangelogs: Compatibility levels before 9 are deprecated (level 5 in use)
    dh_installdocs
    dh_installdocs: Compatibility levels before 9 are deprecated (level 5 in use)
    dh_installexamples
    dh_installexamples: Compatibility levels before 9 are deprecated (level 5 in use)
    dh_installinit
    dh_installinit: Compatibility levels before 9 are deprecated (level 5 in use)
    dh_installman
    dh_installman: Compatibility levels before 9 are deprecated (level 5 in use)
    dh_link
    dh_strip
    dh_strip: Compatibility levels before 9 are deprecated (level 5 in use)
    dh_compress
    dh_compress: Compatibility levels before 9 are deprecated (level 5 in use)
    dh_fixperms --exclude jk_chrootsh --exclude jk_procmailwrapper
    dh_makeshlibs
    dh_installdeb
    dh_installdeb: Compatibility levels before 9 are deprecated (level 5 in use)
    dh_shlibdeps
    dh_shlibdeps: Compatibility levels before 9 are deprecated (level 5 in use)
    dh_gencontrol
    dpkg-gencontrol: warning:     debian/changelog(l9): badly formatted heading line
    LINE: -- Olivier <[email protected]>  Wed, 18 Nov 2015 20:38:44 +0100
    dpkg-gencontrol: warning:     debian/changelog(l11): found start of entry where expected more change data or trailer
    LINE: jailkit (2.18-1) UNRELEASED; urgency=medium
    dpkg-gencontrol: warning:     debian/changelog(l11): found end of file where expected more change data or trailer
    dpkg-gencontrol: warning:     debian/changelog(l9): badly formatted heading line
    LINE: -- Olivier <[email protected]>  Wed, 18 Nov 2015 20:38:44 +0100
    dpkg-gencontrol: warning:     debian/changelog(l11): found start of entry where expected more change data or trailer
    LINE: jailkit (2.18-1) UNRELEASED; urgency=medium
    dpkg-gencontrol: warning:     debian/changelog(l11): found end of file where expected more change data or trailer
    dh_md5sums
    dh_builddeb
    dpkg-deb: building package 'jailkit' in '../jailkit_2.20-1_amd64.deb'.
    dpkg-deb: building package 'jailkit-dbgsym' in '../jailkit-dbgsym_2.20-1_amd64.deb'.
    make[1]: Leaving directory '/tmp/jailkit-2.20'
    [email protected]:/tmp/jailkit-2.20#
    [email protected]:/tmp/jailkit-2.20# cd ..
    [email protected]:/tmp# dpkg -i jailkit_2.20-1_*.deb
    Selecting previously unselected package jailkit.
    (Reading database ... 60472 files and directories currently installed.)
    Preparing to unpack jailkit_2.20-1_amd64.deb ...
    Unpacking jailkit (2.20-1) ...
    Setting up jailkit (2.20-1) ...
    Processing triggers for systemd (241-7~deb10u1) ...
    Processing triggers for man-db (2.8.5-2) ...
    [email protected]:/tmp# rm -rf jailkit-2.20*
    [email protected]:/tmp#
     
  8. albertf

    albertf Member HowtoForge Supporter

    Sorry for all the lignes...no other choice to show the problem with details
     
  9. till

    till Super Moderator Staff Member ISPConfig Developer

    These are no errors. That's the normal output when you compile a C program on Linux.
     
  10. albertf

    albertf Member HowtoForge Supporter

    Thank you for all your answers and your time
     
    Last edited: Oct 6, 2019

Share This Page