IDE error during BOOT

Discussion in 'Technical' started by nvn, Jul 26, 2006.

  1. nvn

    nvn New Member

    Hi

    I get this error during boot on my SUSE 10.1 webserver ?

    What does it mean ?

    <4>hdc: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest }
    <4>ide: failed opcode was: unknown
    <4>hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    <4>hdc: dma_intr: error=0x00 { }
    <4>ide: failed opcode was: unknown
    <4>hdc: recal_intr: status=0x51 { DriveReady SeekComplete Error }
    <4>hdc: recal_intr: error=0x00 { }
    <4>ide: failed opcode was: unknown
    <4>hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    <4>hdc: dma_intr: error=0x00 { }
    <4>ide: failed opcode was: unknown
    <6>hdc: DMA disabled
    <4>ide1: reset: success


    /niki
     
  2. falko

    falko Super Moderator

  3. Ben

    Ben HowtoForge Supporter

    Nevertheless try to install smartctl and check your hdd for bad sektors just to be sure...
     
  4. themachine

    themachine HowtoForge Supporter

    Um... from my many years of watching drives die... this has all of the characteristics of a failing hard disk (physical errors). I would make a backup immediately... maybe play around with it... see if you can correct it, but by all means please fully expect this drive to completely bork at anytime.
     
  5. davekeogh

    davekeogh New Member

    Knowing suse the way i do, dmesg will always show these error messages for CDROM and DVD-ROM devices when there is no media inserted. Is /dev/hdc a cdrom?
     

Share This Page