I delete from mistake /etc/apache2/apache2.conf

Discussion in 'Installation/Configuration' started by Julian, Feb 20, 2014.

  1. Julian

    Julian Member

    Hello,

    I delete from mistake /etc/apache2/apache2.conf
    I have ispconfig debian squeeze

    Can someone help me with the file?

    Thank you very much
     
  2. Julian

    Julian Member

    There is anyone that can help me with this file?

    Thank you very much
     
  3. till

    till Super Moderator Staff Member ISPConfig Developer

    Code:
    #
    # Based upon the NCSA server configuration files originally by Rob McCool.
    #
    # This is the main Apache server configuration file.  It contains the
    # configuration directives that give the server its instructions.
    # See http://httpd.apache.org/docs/2.2/ for detailed information about
    # the directives.
    #
    # Do NOT simply read the instructions in here without understanding
    # what they do.  They're here only as hints or reminders.  If you are unsure
    # consult the online docs. You have been warned.  
    #
    # The configuration directives are grouped into three basic sections:
    #  1. Directives that control the operation of the Apache server process as a
    #     whole (the 'global environment').
    #  2. Directives that define the parameters of the 'main' or 'default' server,
    #     which responds to requests that aren't handled by a virtual host.
    #     These directives also provide default values for the settings
    #     of all virtual hosts.
    #  3. Settings for virtual hosts, which allow Web requests to be sent to
    #     different IP addresses or hostnames and have them handled by the
    #     same Apache server process.
    #
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path.  If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "foo.log"
    # with ServerRoot set to "/etc/apache2" will be interpreted by the
    # server as "/etc/apache2/foo.log".
    #
    
    ### Section 1: Global Environment
    #
    # The directives in this section affect the overall operation of Apache,
    # such as the number of concurrent requests it can handle or where it
    # can find its configuration files.
    #
    
    #
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    #
    # NOTE!  If you intend to place this on an NFS (or otherwise network)
    # mounted filesystem then please read the LockFile documentation (available
    # at <URL:http://httpd.apache.org/docs/2.2/mod/mpm_common.html#lockfile>);
    # you will save yourself a lot of trouble.
    #
    # Do NOT add a slash at the end of the directory path.
    #
    #ServerRoot "/etc/apache2"
    
    #
    # The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
    #
    LockFile ${APACHE_LOCK_DIR}/accept.lock
    
    #
    # PidFile: The file in which the server should record its process
    # identification number when it starts.
    # This needs to be set in /etc/apache2/envvars
    #
    PidFile ${APACHE_PID_FILE}
    
    #
    # Timeout: The number of seconds before receives and sends time out.
    #
    Timeout 300
    
    #
    # KeepAlive: Whether or not to allow persistent connections (more than
    # one request per connection). Set to "Off" to deactivate.
    #
    KeepAlive On
    
    #
    # MaxKeepAliveRequests: The maximum number of requests to allow
    # during a persistent connection. Set to 0 to allow an unlimited amount.
    # We recommend you leave this number high, for maximum performance.
    #
    MaxKeepAliveRequests 10
    
    #
    # KeepAliveTimeout: Number of seconds to wait for the next request from the
    # same client on the same connection.
    #
    KeepAliveTimeout 5
    
    ##
    ## Server-Pool Size Regulation (MPM specific)
    ## 
    
    # prefork MPM
    # StartServers: number of server processes to start
    # MinSpareServers: minimum number of server processes which are kept spare
    # MaxSpareServers: maximum number of server processes which are kept spare
    # MaxClients: maximum number of server processes allowed to start
    # MaxRequestsPerChild: maximum number of requests a server process serves
    <IfModule mpm_prefork_module>
        StartServers          5
        MinSpareServers       5
        MaxSpareServers      10
        MaxClients          150
        MaxRequestsPerChild   0
    </IfModule>
    
    # worker MPM
    # StartServers: initial number of server processes to start
    # MaxClients: maximum number of simultaneous client connections
    # MinSpareThreads: minimum number of worker threads which are kept spare
    # MaxSpareThreads: maximum number of worker threads which are kept spare
    # ThreadLimit: ThreadsPerChild can be changed to this maximum value during a
    #              graceful restart. ThreadLimit can only be changed by stopping
    #              and starting Apache.
    # ThreadsPerChild: constant number of worker threads in each server process
    # MaxRequestsPerChild: maximum number of requests a server process serves
    <IfModule mpm_worker_module>
        StartServers          2
        MinSpareThreads      25
        MaxSpareThreads      75 
        ThreadLimit          64
        ThreadsPerChild      25
        MaxClients          150
        MaxRequestsPerChild   0
    </IfModule>
    
    # event MPM
    # StartServers: initial number of server processes to start
    # MaxClients: maximum number of simultaneous client connections
    # MinSpareThreads: minimum number of worker threads which are kept spare
    # MaxSpareThreads: maximum number of worker threads which are kept spare
    # ThreadsPerChild: constant number of worker threads in each server process
    # MaxRequestsPerChild: maximum number of requests a server process serves
    <IfModule mpm_event_module>
        StartServers          2
        MaxClients          150
        MinSpareThreads      25
        MaxSpareThreads      75 
        ThreadLimit          64
        ThreadsPerChild      25
        MaxRequestsPerChild   0
    </IfModule>
    
    # These need to be set in /etc/apache2/envvars
    User ${APACHE_RUN_USER}
    Group ${APACHE_RUN_GROUP}
    
    #
    # AccessFileName: The name of the file to look for in each directory
    # for additional configuration directives.  See also the AllowOverride
    # directive.
    #
    
    AccessFileName .htaccess
    
    #
    # The following lines prevent .htaccess and .htpasswd files from being 
    # viewed by Web clients. 
    #
    <Files ~ "^\.ht">
        Order allow,deny
        Deny from all
        Satisfy all
    </Files>
    
    #
    # DefaultType is the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value.  If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    #
    DefaultType text/plain
    
    
    #
    # HostnameLookups: Log the names of clients or just their IP addresses
    # e.g., www.apache.org (on) or 204.62.129.132 (off).
    # The default is off because it'd be overall better for the net if people
    # had to knowingly turn this feature on, since enabling it means that
    # each client request will result in AT LEAST one lookup request to the
    # nameserver.
    #
    HostnameLookups Off
    
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here.  If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    #
    ErrorLog ${APACHE_LOG_DIR}/error.log
    
    #
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    #
    LogLevel warn
    
    # Include module configuration:
    Include mods-enabled/*.load
    Include mods-enabled/*.conf
    
    # Include all the user configurations:
    Include httpd.conf
    
    # Include ports listing
    Include ports.conf
    
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    # If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i
    #
    LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
    LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %O" common
    LogFormat "%{Referer}i -> %U" referer
    LogFormat "%{User-agent}i" agent
    
    # Include of directories ignores editors' and dpkg's backup files,
    # see README.Debian for details.
    
    # Include generic snippets of statements
    Include conf.d/
    
    # Include the virtual host configurations:
    Include sites-enabled/
     
  4. Julian

    Julian Member

    Thank you very much
     

Share This Page