help with ups nut!!

Discussion in 'Technical' started by rickygm, Aug 8, 2006.

  1. rickygm

    rickygm New Member

    I am trying to configure my ups APC BACK-UPS 450 with nut, when finishing set and to start up the nut daemon, it presents me this error:

    Communications with UPS [email protected] lost

    Broadcast message from nut (Tue Aug 8 11:01:49 2006):

    UPS [email protected] is unavailable

    Broadcast message from nut (Tue Aug 8 11:06:59 2006):

    UPS [email protected] is unavailable

    sion upsd[4048]: Rejecting TCP connection from 127.0.0.1
    Aug 8 11:09:04 sion upsmon[4053]: Set username on [[email protected]] failed: Server disconnected
    Aug 8 11:09:09 sion upsmon[4053]: Poll UPS [[email protected]] failed - Write error: Bad file descriptor
    Aug 8 11:09:14 sion upsd[4048]: Rejecting TCP connection from 127.0.0.1
    Aug 8 11:09:14 sion upsmon[4053]: Set username on [[email protected]] failed: Server disconnected
    Aug 8 11:09:19 sion upsmon[4053]: Poll UPS [[email protected]] failed - Write error: Bad file descriptor


    my ups is connected my server with the serial port com1, my configuration files :


    ups.conf

    [myups]
    driver = apcsmart
    port = /dev/ttyS0
    sdtype = 0

    upsd.users

    [monuser]
    password = linuxserverblade
    allowfrom = localhost
    upsmon master
    upsd.conf

    ACL all 0.0.0.0/0
    ACL localhost 127.0.0.1/32

    ACCESS grant monitor localhost
    ACCESS deny all all


    upsmon.conf

    MONITOR [email protected] 1 monuser linuxserverblade master


    somebody has a guide with CentOS or fedora

    than forums
     

Share This Page