help needed please and thanks in advance

Discussion in 'Installation/Configuration' started by iniVan, May 16, 2020.

  1. iniVan

    iniVan New Member

    well i did this installing
    The Perfect Server - Debian 9 (Stretch) with Apache, BIND, Dovecot, PureFTPD and ISPConfig 3.1
    most thing went well ftp,hosting phpadmin is working fine roundcube is installed but cant login and when i try to let say send mail from my gmail account i get this message

    The response from the remote server was:

    503 This mail server requires authentication when attempting to send to a non-local e-mail address. Please check your mail client settings or contact your administrator to verify that the domain or address is defined for this server.

    Message not delivered
    There was a problem delivering your message to [email protected]. See the technical details below, or try resending in a few minutes.
     
    Last edited: May 17, 2020
  2. till

    till Super Moderator Staff Member ISPConfig Developer

    Please post the content of the file /etc/postfix/master.cf
     
    iniVan likes this.
  3. iniVan

    iniVan New Member

    #
    # Postfix master process configuration file. For details on the format
    # of the file, see the master(5) manual page (command: "man 5 master" or
    # on-line: http://www.postfix.org/master.5.html).
    #
    # Do not forget to execute "postfix reload" after editing this file.
    #
    # ==========================================================================
    # service type private unpriv chroot wakeup maxproc command + args
    # (yes) (yes) (no) (never) (100)
    # ==========================================================================
    smtp inet n - y - - smtpd
    #smtp inet n - y - 1 postscreen
    #smtpd pass - - y - - smtpd
    #dnsblog unix - - y - 0 dnsblog
    #tlsproxy unix - - y - 0 tlsproxy
    #submission inet n - y - - smtpd
    -o syslog_name=postfix/submission
    -o smtpd_tls_security_level=encrypt
    -o smtpd_sasl_auth_enable=yes
    # -o smtpd_reject_unlisted_recipient=no
    -o smtpd_client_restrictions=$mua_client_restrictions
    # -o smtpd_helo_restrictions=$mua_helo_restrictions
    # -o smtpd_sender_restrictions=$mua_sender_restrictions
    # -o smtpd_recipient_restrictions=
    # -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
    # -o milter_macro_daemon_name=ORIGINATING
    #smtps inet n - y - - smtpd
    -o syslog_name=postfix/smtps
    -o smtpd_tls_wrappermode=yes
    -o smtpd_sasl_auth_enable=yes
    # -o smtpd_reject_unlisted_recipient=no
    -o smtpd_client_restrictions=$mua_client_restrictions
    # -o smtpd_helo_restrictions=$mua_helo_restrictions
    # -o smtpd_sender_restrictions=$mua_sender_restrictions
    # -o smtpd_recipient_restrictions=
    #
    # Postfix master process configuration file. For details on the format
    # of the file, see the master(5) manual page (command: "man 5 master" or
    # on-line: http://www.postfix.org/master.5.html).
    #
    # Do not forget to execute "postfix reload" after editing this file.
    #
    # ==========================================================================
    # service type private unpriv chroot wakeup maxproc command + args
    # (yes) (yes) (no) (never) (100)
    # ==========================================================================
    smtp inet n - y - - smtpd
    #smtp inet n - y - 1 postscreen
    #smtpd pass - - y - - smtpd
    #dnsblog unix - - y - 0 dnsblog
    #tlsproxy unix - - y - 0 tlsproxy
    #submission inet n - y - - smtpd
    -o syslog_name=postfix/submission
    -o smtpd_tls_security_level=encrypt
    -o smtpd_sasl_auth_enable=yes
    # -o smtpd_reject_unlisted_recipient=no
    -o smtpd_client_restrictions=$mua_client_restrictions
    # -o smtpd_helo_restrictions=$mua_helo_restrictions
    # -o smtpd_sender_restrictions=$mua_sender_restrictions
    # -o smtpd_recipient_restrictions=
    # -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
    # -o milter_macro_daemon_name=ORIGINATING
    #smtps inet n - y - - smtpd
    -o syslog_name=postfix/smtps
    -o smtpd_tls_wrappermode=yes
    -o smtpd_sasl_auth_enable=yes
    # -o smtpd_reject_unlisted_recipient=no
    -o smtpd_client_restrictions=$mua_client_restrictions
    # -o smtpd_helo_restrictions=$mua_helo_restrictions
    # -o smtpd_sender_restrictions=$mua_sender_restrictions
    # -o smtpd_recipient_restrictions=
    # -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
    # -o milter_macro_daemon_name=ORIGINATING
    #628 inet n - y - - qmqpd
    pickup unix n - y 60 1 pickup
    cleanup unix n - y - 0 cleanup
    qmgr unix n - n 300 1 qmgr
    #qmgr unix n - n 300 1 oqmgr
    tlsmgr unix - - y 1000? 1 tlsmgr
    rewrite unix - - y - - trivial-rewrite
    bounce unix - - y - 0 bounce
    defer unix - - y - 0 bounce
    trace unix - - y - 0 bounce
    verify unix - - y - 1 verify
    flush unix n - y 1000? 0 flush
    proxymap unix - - n - - proxymap
    proxywrite unix - - n - 1 proxymap
    smtp unix - - y - - smtp
    relay unix - - y - - smtp
    # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
    showq unix n - y - - showq
    error unix - - y - - error
    retry unix - - y - - error
    discard unix - - y - - discard
    local unix - n n - - local
    virtual unix - n n - - virtual
    lmtp unix - - y - - lmtp
    anvil unix - - y - 1 anvil
    scache unix - - y - 1 scache
    #
    # ====================================================================
    # Interfaces to non-Postfix software. Be sure to examine the manual
    # pages of the non-Postfix software to find out what options it wants.
    #
    # Many of the following services use the Postfix pipe(8) delivery
    # agent. See the pipe(8) man page for information about ${recipient}
    # and other message envelope options.
    # ====================================================================
    #
    # maildrop. See the Postfix MAILDROP_README file for details.
    # Also specify in main.cf: maildrop_destination_recipient_limit=1
    #
    maildrop unix - n n - - pipe
    flags=DRhu user=vmail argv=/usr/bin/maildrop -d vmail ${extension} ${recipient} ${user} ${nexthop} ${sender}
    #
    # ====================================================================
    #
    # Recent Cyrus versions can use the existing "lmtp" master.cf entry.
    #
    # Specify in cyrus.conf:
    # lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
    #
    # Specify in main.cf one or more of the following:
    # mailbox_transport = lmtp:inet:localhost
    # virtual_transport = lmtp:inet:localhost
    #
    # ====================================================================
    #
    # Cyrus 2.1.5 (Amos Gouaux)
    # Also specify in main.cf: cyrus_destination_recipient_limit=1
    #
    #cyrus unix - n n - - pipe
    # user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
    #
    # ====================================================================
    # Old example of delivery via Cyrus.
    #
    #old-cyrus unix - n n - - pipe
    # flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
    #
    # ====================================================================
    #
    # See the Postfix UUCP_README file for configuration details.
    #
    uucp unix - n n - - pipe
    flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
    #
    # Other external delivery methods.
    #
    ifmail unix - n n - - pipe
    flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
    bsmtp unix - n n - - pipe
    flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
    scalemail-backend unix - n n - 2 pipe
    flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
    mailman unix - n n - - pipe
    flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
    ${nexthop} ${user}

    dovecot unix - n n - - pipe
    flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${user}@${nexthop}

    amavis unix - - - - 2 smtp
    -o smtp_data_done_timeout=1200
    -o smtp_send_xforward_command=yes
    -o smtp_bind_address=


    127.0.0.1:10025 inet n - n - - smtpd
    -o content_filter=
    -o local_recipient_maps=
    -o relay_recipient_maps=
    -o smtpd_restriction_classes=
    -o smtpd_client_restrictions=
    -o smtpd_helo_restrictions=
    -o smtpd_sender_restrictions=
    -o smtpd_recipient_restrictions=permit_mynetworks,reject
    -o mynetworks=127.0.0.0/8
    -o strict_rfc821_envelopes=yes
    -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks
    -o smtp_send_xforward_command=yes
    -o disable_dns_lookups=yes


    127.0.0.1:10027 inet n - n - - smtpd
    -o content_filter=
    -o local_recipient_maps=
    -o relay_recipient_maps=
    -o smtpd_restriction_classes=
    -o smtpd_client_restrictions=
    -o smtpd_helo_restrictions=
    -o smtpd_sender_restrictions=
    -o smtpd_recipient_restrictions=permit_mynetworks,reject
    -o mynetworks=127.0.0.0/8
    -o strict_rfc821_envelopes=yes
    -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks
    -o smtp_send_xforward_command=yes
    -o milter_default_action=accept
    -o milter_macro_daemon_name=ORIGINATING
    -o disable_dns_lookups=yes
     
  4. iniVan

    iniVan New Member

    i found 2 error
    1#submission inet n - y - - smtpd
    2#smtps inet n - y - - smtpd
     
  5. iniVan

    iniVan New Member

    help anyone
    Please
     
  6. till

    till Super Moderator Staff Member ISPConfig Developer

    You found the two errors that I expected. Did you correct them and restarted postfix? Then check, if it works now.
     
  7. iniVan

    iniVan New Member

    sorry but am still having the same problem, do you think i should redo the email accounts over in ispconfig.
     
  8. till

    till Super Moderator Staff Member ISPConfig Developer

    No.

    Check the lines that start with -o where you removed the # in front of, take care that there is a whitespace before the -o as shown in the tutorial. Do not remove that whitespace.
     
  9. iniVan

    iniVan New Member

    still no go for me more then willing to pay to get it fix time is of importants
     
  10. till

    till Super Moderator Staff Member ISPConfig Developer

  11. iniVan

    iniVan New Member

    yes i sent the email now await a reply:(
     

Share This Page