FTP error using FileZilla

Discussion in 'Installation/Configuration' started by IrishDoc, Nov 2, 2012.

  1. IrishDoc

    IrishDoc New Member

    I am trying to use filezilla to connect to my server via ftp. I can connect via ssh in filezilla but that is to the root of the server and not to a client setup.

    This is the error
    Code:
    Error:	Could not connect to server
    Status:	Connecting to 91.121.154.14:8080...
    Status:	Connection attempt failed with "ECONNREFUSED - Connection refused by server".
    Error:	Could not connect to server
    Status:	Waiting to retry...
    Status:	Connecting to 91.121.154.14:8080...
    Status:	Connection attempt failed with "ECONNREFUSED - Connection refused by server".
    Error:	Could not connect to server

    How can I fix this? Maybe I have the wrong port? Took out the port and this is what I recieve.

    Code:
    Status:	Connecting to 91.121.154.14:21...
    Status:	Connection established, waiting for welcome message...
    Response:	220 Welcome to FTP service.
    Command:	AUTH TLS
    Response:	530 Please login with USER and PASS.
    Command:	AUTH SSL
    Response:	530 Please login with USER and PASS.
    Error:	Critical error
    Error:	Could not connect to server
    I did setup the user and the password in isp3
     
    Last edited: Nov 2, 2012
  2. IrishDoc

    IrishDoc New Member

    Could it possibly be a problem with the ftp script or quota??

    isp3 is showing the ftp-server offline. Not sure on how to fix this.
     
    Last edited: Nov 2, 2012
  3. falko

    falko Super Moderator Howtoforge Staff Moderator HowtoForge Supporter ISPConfig Developer

    Did you try both active and passive transfers in your FTP client?
     
  4. IrishDoc

    IrishDoc New Member

    Yes, neither work.

    I did manage to get isp3 to show the ftp-server online though and still no connection.
     
  5. IrishDoc

    IrishDoc New Member

    finally got it working.
     
  6. IrishDoc

    IrishDoc New Member

    I am having the same problem again but the connection is timing out for some reason.

    Code:
    Status:	Connecting to 91.********.14:21...
    Status:	Connection established, waiting for welcome message...
    Response:	220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
    Response:	220-You are user number 5 of 50 allowed.
    Response:	220-Local time is now 21:50. Server port: 21.
    Response:	220-This is a private system - No anonymous login
    Response:	220-IPv6 connections are also welcome on this server.
    Response:	220 You will be disconnected after 15 minutes of inactivity.
    Command:	AUTH TLS
    Response:	234 AUTH TLS OK.
    Status:	Initializing TLS...
    Status:	Verifying certificate...
    Command:	USER ***********
    Status:	TLS/SSL connection established.
    Response:	331 User *********** OK. Password required
    Command:	PASS *********
    Response:	230 OK. Current restricted directory is /
    Command:	SYST
    Response:	215 UNIX Type: L8
    Command:	FEAT
    Response:	211-Extensions supported:
    Response:	 EPRT
    Response:	 IDLE
    Response:	 MDTM
    Response:	 SIZE
    Response:	 MFMT
    Response:	 REST STREAM
    Response:	 MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*;
    Response:	 MLSD
    Response:	 AUTH TLS
    Response:	 PBSZ
    Response:	 PROT
    Response:	 UTF8
    Response:	 TVFS
    Response:	 ESTA
    Response:	 PASV
    Response:	 EPSV
    Response:	 SPSV
    Response:	 ESTP
    Response:	211 End.
    Command:	OPTS UTF8 ON
    Response:	200 OK, UTF-8 enabled
    Command:	PBSZ 0
    Response:	200 PBSZ=0
    Command:	PROT P
    Response:	200 Data protection level set to "private"
    Status:	Connected
    Status:	Retrieving directory listing...
    Command:	PWD
    Response:	257 "/" is your current location
    Command:	TYPE I
    Response:	200 TYPE is now 8-bit binary
    Command:	PORT 192,168,0,11,245,33
    Response:	500 I won't open a connection to 192.168.0.11 (only to 75.--------.59)
    Command:	PASV
    Response:	227 Entering Passive Mode (91,121,156,14,188,244)
    Command:	MLSD
    Error:	Connection timed out
    Error:	Failed to retrieve directory listing

    Seperate question: how do I change the time on the server to reflect my area, not the area of the server?
     
  7. falko

    falko Super Moderator Howtoforge Staff Moderator HowtoForge Supporter ISPConfig Developer

    Which distribution do you use?
     
  8. IrishDoc

    IrishDoc New Member

    The server is using ubuntu 12.04lts.

    Any chance you could help with the ftp issue also? I am sure it is not my firewall, as I can use the same program on the same port to another server and have no issues connecting but none of the accounts I have created in isp3 connect using ftp.
     
  9. IrishDoc

    IrishDoc New Member

    Come on guys, I really need help with this ftp issue. Ideas or even shots in the dark I can try, something, PLEASE!!
     
  10. falko

    falko Super Moderator Howtoforge Staff Moderator HowtoForge Supporter ISPConfig Developer

    You can do this by running

    Code:
    dpkg-reconfigure tzdata
     
  11. IrishDoc

    IrishDoc New Member

    Thanks, BTW I have gotten the ftp issue resolved.
     
  12. concept21

    concept21 Member

    "ssh ftp" is not equal to "TLS ftp" :D
     

Share This Page