Email forward stop working for most of the domains...

Discussion in 'Installation/Configuration' started by W-C, Jul 5, 2017.

  1. W-C

    W-C Member

    Hello,

    Email forward stop working for some of the domains that the server is hosting, only one of the domains is able to perform the email forward, the option "send copy to" (not aliases).

    I checked that the parameter "inet_interfaces = all' was configured on the main.cf postfix's file. I would really appreciate any advice what other configuration related to forward options could I checked.

    The server is running under Centos 5.5 and ISPConfig 3
     
  2. till

    till Super Moderator Staff Member ISPConfig Developer

    What exactly is logged in the mail.log file when you send an email to one of these non-working forwards?
     
  3. W-C

    W-C Member

    till,
    Could be this forward option related to the sendmail service?, because it is stopped.

    Attached iss the file with the logs...
     

    Attached Files:

  4. W-C

    W-C Member

    Hello,
    I would really appreciate if someone can tell me if there is any specific service related to email forward on postfix?, I have not been able to make the email forward option work, it is has been disabled after a server shutdown and restart.

    Thanks.
     
  5. W-C

    W-C Member

    These are the actual services running on the server:
    [[email protected] ~]# service --status-all
    acpid (pid 2778) is running...
    amavisd (pid 24952 1181 1159 1152 1151 1129) is running...
    anacron is stopped
    atd (pid 3231) is running...
    auditd (pid 2457) is running...
    automount (pid 2861) is running...
    Avahi daemon is not running
    Avahi DNS daemon is not running
    hcid (pid 2672) is running...
    sdpd dead but subsys locked
    clamd (pid 5593) is running...
    conmand is stopped
    cpuspeed is stopped
    crond (pid 3097) is running...
    cupsd (pid 2890) is running...
    cups-config-daemon is obsolete
    dc_client is stopped
    dc_server is stopped
    dnsmasq is stopped
    dund is stopped
    Fail2ban (pid 28677) is running...
    Status
    |- Number of jail: 5
    `- Jail list: postfix-tcpwrapper, apache-tcpwrapper, proftpd-iptables, ssh-iptables, sasl
    Usage: /etc/init.d/firstboot {start|stop}
    gpm (pid 3070) is running...
    hald (pid 2792) is running...
    hidd (pid 2834) is running...
    httpd (pid 31143) is running...
    ibmsphalt is stopped
    Firewall is stopped.
    ipmi_msghandler module not loaded.
    ipmi_si module not loaded.
    ipmi_devintf module not loaded.
    /dev/ipmi0 does not exist.
    irattach is stopped
    irqbalance (pid 2538) is running...
    Kdump is not operational
    krb524d is stopped
    slapd is stopped
    mailman is stopped
    mcstransd is stopped
    mdadm is stopped
    mdmpd is stopped
    dbus-daemon (pid 2657) is running...
    monit is stopped
    multipathd is stopped
    munin-node (pid 3110) is running...
    mydns is stopped
    mysqld (pid 15799) is running...
    netconsole module not loaded
    netplugd is stopped
    Configured devices:
    lo eth0 eth1
    Currently active devices:
    lo eth0 eth1
    NetworkManager is stopped
    rpc.mountd is stopped
    nfsd is stopped
    rpc.rquotad is stopped
    rpc.statd (pid 2594) is running...
    nscd is stopped
    ntpd (pid 2916) is running...
    oddjobd is stopped
    pand is stopped
    pcscd (pid 2768) is running...
    portmap (pid 2549) is running...
    master (pid 22341) is running...
    pptpd is stopped
    Process accounting is disabled.
    pure-ftpd is stopped
    rdisc is stopped
    rpc.idmapd (pid 2635) is running...
    rrdcached is stopped
    saslauthd (pid 3256 3255 3254 3253 3251) is running...
    sendmail is stopped
    setroubleshootd is stopped
    smartd (pid 3640) is running...
    smbd is stopped
    nmbd is stopped
    snmpd is stopped
    snmptrapd is stopped
    spamd (pid 10793) is running...
    squid is stopped
    openssh-daemon (pid 2881) is running...
    syslogd (pid 2481) is running...
    klogd (pid 2484) is running...
    tcsd is stopped
    tux is stopped
    Xvnc is stopped
    vsftpd is stopped
    wdaemon is stopped
    winbindd is stopped
    wpa_supplicant is stopped
    xfs (pid 3203) is running...
    xinetd (pid 2904) is running...
    ypbind is stopped
    yum-updatesd (pid 3542) is running...
     
  6. till

    till Super Moderator Staff Member ISPConfig Developer

    No. sendmail is not used on an ISPConfig server.

    The log shows that you have sent a message to [email protected] forwarded from [email protected] and the message was delivered successfully in the local mailbox of [email protected]. The "send copy to" function is not an email forward, it is a local mailbox script to send a copy. Email forwards are in the left menu under email forward.
     
    W-C likes this.
  7. W-C

    W-C Member

    Till,

    Thanks for your always help and the explanation, I trying to make the "send copy to" worked, there are several domains on the server and it's only working for one domain.


    Can I create this script on the mailbox manually and try to make it worked?.
     
  8. W-C

    W-C Member

    The logs don't show anything related to [email protected] forwarded from [email protected], before the reboot I can confirm that the logs show all the info related to copied email account.

    Also I tried the Custom rule option with this cc '[email protected]omain2.com' that was working before as well.
     
    Last edited: Sep 15, 2017
  9. till

    till Super Moderator Staff Member ISPConfig Developer

    The filter scripts on courier servers (and you seem to use courier imap and not dovecot) are in /var/vmail/mailfilters/.....
     
    W-C likes this.
  10. W-C

    W-C Member

    Till,
    I managed to copy the directory with file containing the script from one working account, changed the name and added the email account that I wanted to be copied and it worked.

    Something that is very curious is that the logs don't show the info related to the copied accounts, even with the only domain that was working before. Also when I tried to add a new email from the webpanel from ISPconfig didn't work, the file remains the same even maintains the last modified time stamp.

    It could be something related from permissions needed from the control panel?

    By now I think i can make it work manually .

    Thanks a lot!!!
     
  11. till

    till Super Moderator Staff Member ISPConfig Developer

    W-C likes this.
  12. W-C

    W-C Member

    Till,

    I tried to enable the detailed log from the link tutorial and it's not working, right now I was trying to enable autoresponder and it did'nt worked. I was thinking that maybe there is one service that was not enable on reboot because everytime that I tried to modified something from the web console it not worked.

    :(
     
  13. till

    till Super Moderator Staff Member ISPConfig Developer

    Please post the debug output that you get when you run the server.sh script.
     
    W-C likes this.
  14. W-C

    W-C Member

    Till,
    This is the only output that I got when running the script manually:

    [[email protected] ~]# /usr/local/ispconfig/server/server.sh
    /usr/local/ispconfig/server/server.sh: line 7: 11416 File size limit exceeded/usr/bin/php -q /usr/local/ispconfig/server/server.php
    [[email protected] ~]#


    ===========================================
    This is the original cronjob file:
    #*/30 * * * * /bin/sa_learn
    #23 4 */2 * * /usr/bin/sa-update --no-gpg &> /dev/null
    #* 6 * * * /imap
    # 10 * * * * lynx cat /proc/net/ipt_recent/SMTP | grep -o '[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}.[0-9]\{1,3\}' > /ips.txt
    * * * * * /usr/local/ispconfig/server/server.sh &> /dev/null
    30 00 * * * /usr/local/ispconfig/server/cron_daily.sh &> /dev/null
    #* 1 * * * /usr/sbin/postsuper -d ALL
    #* 6 * * * sync; echo 3 > /proc/sys/vm/drop_caches

    ##### delete ipsconfig lock file ####
    #*/1 * * * * rm -rf /usr/local/ispconfig/server/temp/.ispconfig_lock
    #0,50 * * * * cat /dev/null > /var/log/maillog

    # SendmailAnalyzer log reporting daily cache
    #0 1 * * * /usr/local/sendmailanalyzer/sa_cache > /dev/null 2>&1
    # On huge MTA you may want to have five minutes caching
    #*/5 * * * * /usr/local/sendmailanalyzer/sa_cache -a > /dev/null 2>&1
    4 */2 * * * /usr/bin/sa-update --no-gpg &> /dev/null

    ====================================================
    And this one is the modified one:

    #*/30 * * * * /bin/sa_learn
    #23 4 */2 * * /usr/bin/sa-update --no-gpg &> /dev/null
    #* 6 * * * /imap
    # 10 * * * * lynx cat /proc/net/ipt_recent/SMTP | grep -o '[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}.[0-9]\{1,3\}' > /ips.txt
    #* * * * * /usr/local/ispconfig/server/server.sh &> /dev/null
    30 00 * * * /usr/local/ispconfig/server/cron_daily.sh &> /dev/null
    #* 1 * * * /usr/sbin/postsuper -d ALL
    #* 6 * * * sync; echo 3 > /proc/sys/vm/drop_caches

    ##### delete ipsconfig lock file ####
    #*/1 * * * * rm -rf /usr/local/ispconfig/server/temp/.ispconfig_lock
    #0,50 * * * * cat /dev/null > /var/log/maillog

    # SendmailAnalyzer log reporting daily cache
    #0 1 * * * /usr/local/sendmailanalyzer/sa_cache > /dev/null 2>&1
    # On huge MTA you may want to have five minutes caching
    #*/5 * * * * /usr/local/sendmailanalyzer/sa_cache -a > /dev/null 2>&1
    4 */2 * * * /usr/bin/sa-update --no-gpg &> /dev/null

    ==========================================
     
    Last edited: Sep 21, 2017
  15. W-C

    W-C Member

    This are the files that I found in /var/log/ispconfig and the size of the ispconfig.log file is 2.0GB :
    [[email protected] ispconfig]# ls -lha
    total 4.1G
    drwxr-xr-x 3 root root 4.0K May 18 2015 .
    drwxr-xr-x 23 root root 4.0K Sep 20 04:23 ..
    -rw-r--r-- 1 root root 2.0G May 18 2015 bk_ispconfig.log
    -rw-rw-rw- 1 root root 0 Nov 23 2010 cron.log
    drwxr-xr-x 4 root root 4.0K Jun 7 2012 httpd
    -rw-r--r-- 1 root root 2.0G Sep 20 07:18 ispconfig.log
    -rw-r--r-- 1 root root 4.8M Sep 20 00:31 ispconfig.log.1.gz


    When I run a cat to the ispconfig.log file it display the following:
    \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\')) -> mysql_query Table \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'./dbispconfig/sys_log\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' is marked as crashed and should be repaired\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\')) -> mysql_query Table \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'./dbispconfig/sys_log\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' is marked as crashed and should be repaired\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\')) -> mysql_query Table \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'./dbispconfig/sys_log\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' is marked as crashed and should be repaired\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\')) -> mysql_query Table \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'./dbispconfig/sys_log\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' is marked as crashed and should be repaired\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\')) -> mysql_query Table \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'./dbispconfig/sys_log\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' is marked as crashed and should be repaired\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\')) -> mysql_query Table \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'./dbispconfig/sys_log\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' is marked as crashed and should be repaired\\\\\\\\\\\\\\\')) -> mysql_query Table \\\\\\\\\\\\\\\'./dbispconfig/sys_log\\\\\\\\\\\\\\\' is marked as crashed and should be repaired\\\\\\\')) -> mysql_query Table \\\\\\\'./dbispconfig/sys_log\\\\\\\' is marked as crashed and should be repaired\\\')) -> mysql_query Table \\\'./dbispconfig/sys_log\\\' is marked as crashed and should be repaired\')) -> mysql_query Table \'./dbispconfig/sys_log\' is marked as crashed and should be repaired')) -> mysql_query Table './dbispconfig/sys_log' is marked as crashed and should be repaired
    20.09.2017-00:32 - WARNING - DB::query(INSERT INTO sys_log (server_id,datalog_id,loglevel,tstamp,message) VALUES ('1',0,'1','1505889121','DB::query(INSERT INTO sys_log (server_id,datalog_id,loglevel,tstamp,message) VALUES (\'1\',0,\'1\',\'1505889121\',\'DB::query(INSERT INTO sys_log (server_id,datalog_id,loglevel,tstamp,message) VALUES (\\\'1\\\',0,\\\'1\\\',\\\'1505889121\\\',\\\'DB::query(INSERT INTO sys_log (server_id,datalog_id,loglevel,tstamp,message) VALUES (\\\\\\\'1\\\\\\\',0,\\\\\\\'1\\\\\\\',\\\\\\\'1505889121\\\\\\\',\\\\\\\'DB::query(INSERT INTO sys_log (server_id,datalog_id,loglevel,tstamp,message) VALUES (\\\\\\\\\\\\\\\'1\\\\\\\\\\\\\\\',0,\\\\\\\\\\\\\\\'1\\\\\\\\\\\\\\\',\\\\\\\\\\\\\\\'1505889121\\\\\\\\\\\\\\\',\\\\\\\\\\\\\\\'DB::query(INSERT INTO sys_log (server_id,datalog_id,loglevel,tstamp,message) VALUES (\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',0,\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1505889121\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'DB::query(INSERT INTO sys_log (server_id,datalog_id,loglevel,tstamp,message) VALUES (\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',0,\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1505889121\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'DB::query(INSERT INTO sys_log (server_id,datalog_id,loglevel,tstamp,message) VALUES (\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',0,\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1505889121\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'DB::query(INSERT INTO sys_log (server_id,datalog_id,loglevel,tstamp,message) VALUES ('1\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',0,\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1505889121\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'DB::query(INSERT INTO sys_log (server_id,datalog_id,loglevel,tstamp,message) VALUES (\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',0,\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1505889121\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'DB::query(INSERT INTO sys_log (server_id,datalog_id,loglevel,tstamp,message) VALUES (\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',0,\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1505889121\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'DB::query(INSERT INTO sys_log (server_id,datalog_id,loglevel,tstamp,message) VALUES (\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',0,\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
     
  16. Jesse Norell

    Jesse Norell Well-Known Member

    You could rename that log file and see if server.sh runs without error. Are you on a 32bit system? That could run into 2G limit (or at least used to), or your filesystem may have a limit there, or maybe you have ulimit in effect (ulimit -f), any of which I believe would cause that error.
     
    W-C likes this.
  17. till

    till Super Moderator Staff Member ISPConfig Developer

    and you should run a repair on all tables in the dbispconfig database with phpmyadmin. there seem to be crashed database tables.
     
    W-C likes this.
  18. W-C

    W-C Member

    Hello Jesse,
    Yes the system is running on 32bit, It's an old system, we already purchased the migration tool to migrate to a new server but first we need to make these things work out due to our clients need this options working properly while we perform the migration.

    I rename the file but the autoresponder option is not working yet.
     
  19. W-C

    W-C Member

    Till,
    While I repair the databases the email service would still running?, or It would be prefer to run the repair on a maintenance window?
     
  20. till

    till Super Moderator Staff Member ISPConfig Developer

    The repair will take less than a minute and mysql works during that time.
     
    W-C likes this.

Share This Page