e-mail problem!!! Debian 3.1

Discussion in 'Installation/Configuration' started by maroonworks, Dec 1, 2005.

  1. maroonworks

    maroonworks New Member

    I did the configuration more than 6X. and still the same problem, i've enabled the maildir from the ispconfig web interface...

    unable to check my pop!!!!

    #Dec 1 10:46:15 debian postfix/smtpd[2407]: connect from unknown[192.168.1.161]
    Dec 1 10:46:16 debian postfix/smtpd[2407]: 143B048DC24: client=unknown[192.168.1.161]
    Dec 1 10:46:16 debian postfix/cleanup[2410]: 143B048DC24: message-id=<[email protected]>
    Dec 1 10:46:16 debian postfix/qmgr[2351]: 143B048DC24: from=<[email protected]>, size=666, nrcpt=1 (queue active)
    Dec 1 10:46:16 debian postfix/smtpd[2407]: disconnect from unknown[192.168.1.161]
    Dec 1 10:46:16 debian courierpop3login: Connection, ip=[::ffff:192.168.1.161]
    Dec 1 10:46:16 debian postfix/pickup[2350]: 9F45948DC25: uid=10002 from=<web1_mjay>
    Dec 1 10:46:16 debian postfix/cleanup[2410]: 9F45948DC25: message-id=<[email protected]>
    Dec 1 10:46:16 debian postfix/local[2411]: 143B048DC24: to=<[email protected]>, orig_to=<[email protected]>, relay=local, dela
    y=0, status=sent (delivered to command: /usr/bin/procmail -f-)
    Dec 1 10:46:16 debian postfix/qmgr[2351]: 143B048DC24: removed
    Dec 1 10:46:16 debian postfix/qmgr[2351]: 9F45948DC25: from=<[email protected]>, size=365, nrcpt=1 (queue active)
    Dec 1 10:46:16 debian postfix/local[2411]: 9F45948DC25: to=<admispconfig@localhost>, relay=local, delay=0, status=sent (delivered to command:
    /usr/bin/procmail -f-)
    Dec 1 10:46:16 debian postfix/qmgr[2351]: 9F45948DC25: removed
    Dec 1 10:46:22 debian courierpop3login: LOGIN FAILED, ip=[::ffff:192.168.1.161]
    Dec 1 10:46:30 debian courierpop3login: Connection, ip=[::ffff:192.168.1.161]
    Dec 1 10:46:35 debian courierpop3login: LOGIN FAILED, ip=[::ffff:192.168.1.161]
    Dec 1 10:47:34 debian postfix/smtpd[2407]: table hash:/etc/postfix/virtusertable(0,100) has changed -- restarting
    Dec 1 10:47:39 debian courierpop3login: Connection, ip=[::ffff:192.168.1.161]
    Dec 1 10:47:40 debian postfix/smtpd[2739]: warning: smtpd_peer_init: 192.168.1.161: hostname mydummy verification failed: Name or service not
    known
    Dec 1 10:47:40 debian postfix/smtpd[2739]: connect from unknown[192.168.1.161]
    Dec 1 10:47:40 debian postfix/smtpd[2739]: lost connection after CONNECT from unknown[192.168.1.161]
    Dec 1 10:47:40 debian postfix/smtpd[2739]: disconnect from unknown[192.168.1.161]
    Dec 1 10:47:44 debian courierpop3login: LOGIN FAILED, ip=[::ffff:192.168.1.161]
    Dec 1 10:47:48 debian courierpop3login: Connection, ip=[::ffff:192.168.1.161]
    Dec 1 10:47:53 debian courierpop3login: LOGIN FAILED, ip=[::ffff:192.168.1.161]
    Dec 1 10:48:03 debian courierpop3login: Connection, ip=[::ffff:192.168.1.161]
    Dec 1 10:48:08 debian courierpop3login: LOGIN FAILED, ip=[::ffff:192.168.1.161]
    Dec 1 10:48:20 debian courierpop3login: Connection, ip=[::ffff:192.168.1.161]
    Dec 1 10:48:25 debian courierpop3login: LOGIN FAILED, ip=[::ffff:192.168.1.161]#
     
  2. till

    till Super Moderator Staff Member ISPConfig Developer

    What do you mean with unable to check your pop? Is the pop3 not running, do you get access denied, is everything working but the emails are not in the pop box?
     
  3. maroonworks

    maroonworks New Member

    hi till,

    thanks for your support 1st...

    well the pop3 service is running and listening on its default port 110, but when I got to check the e-mail on MS outlook the authernication dialogue re-appear { means either the username or the password is error } but i'm sure from the username and password that they are the right one.

    what's really goin on? i've checked the Maildir folder on each user... no problem with tht!

    thx in advance Till :)
     
  4. till

    till Super Moderator Staff Member ISPConfig Developer

    Have you send an email to this user, does it arrive at the maildir folder?

    Please have a look at the mail log and syslog, which error appears when you try to fetch mails with outlook?
     
  5. maroonworks

    maroonworks New Member

    ok works !!!

    but there is another error !! I can't send e-mail "access denied - no relay"

    I checked the option on outlook "use same u/n n p/w for incoming server.

    but couldn't send !!

    this is really weird


    anyway thx a million Till

    Regards,
     
  6. till

    till Super Moderator Staff Member ISPConfig Developer

    Please have a look at your maillog for the error message, this is in most cases as SASL problem.
     
  7. maroonworks

    maroonworks New Member

    hey till, what's up

    well you're right as you've mentioned in your last reply.. error with SASL!

    the code:

    Dec 1 17:18:07 debian postfix/smtpd[9075]: warning: unknown[192.168.1.161]: SASL LOGIN authentication failed
    Dec 1 17:18:07 debian postfix/smtpd[9075]: lost connection after AUTH from unknown[192.168.1.161]
    Dec 1 17:18:07 debian postfix/smtpd[9075]: disconnect from unknown[192.168.1.161]
    Dec 1 17:18:59 debian postfix/smtpd[9068]: warning: smtpd_peer_init: 192.168.1.161: hostname mydummy verification failed: Name or service not
    known

    does it seem a serious problem?

    thx

    Regards,
     
  8. falko

    falko Super Moderator ISPConfig Developer

    Are you sure you enabled "Server requires authentication." or the like in Outlook?
     
  9. maroonworks

    maroonworks New Member

    Hi Falko,

    yes of course I did...

    CRAZY!!!!!

    the same username n password I use to download the e-mails ....

    anyway thx :)

    Regards
     
  10. falko

    falko Super Moderator ISPConfig Developer

    Please post the output of
    Code:
    telnet localhost 25
    (after
    Code:
    telnet localhost 25
    you must issue
    Code:
    ehlo localhost
    and then
    Code:
    quit
    ).
     
  11. maroonworks

    maroonworks New Member

    ok Falko

    250-debian.esig.edu.lb
    250-PIPELINING
    250-SIZE 10240000
    250-VRFY
    250-ETRN
    250-STARTTLS
    250-AUTH LOGIN PLAIN
    250-AUTH=LOGIN PLAIN
    250 8BITMIME
     
  12. falko

    falko Super Moderator ISPConfig Developer

    This is ok.
    I'm still guessing that you didn't enable the right option in Outlook. I don't have Outlook, but in a (German) Outlook Express the option is here:

    [​IMG]
     
  13. maroonworks

    maroonworks New Member

    my friend Falko,

    i'm quite sure that i checked this option...

    that's why i'm lost!!!

    I tried it too on MS outlook 2003, the same shit!

    anyway thx in advance

    Regards,
     
  14. falko

    falko Super Moderator ISPConfig Developer

    Is saslauthd running? Do you see it when you run
    Code:
    ps aux
    ?
     
  15. maroonworks

    maroonworks New Member

    Falko since i'm newbie to debian and linux enviroment ...

    I did what you asked for and here is the report please check it :

    Code:
    debian:/# ps aux
    USER       PID %CPU %MEM   VSZ  RSS TTY      STAT START   TIME COMMAND
    root         1  0.0  0.3  1492  448 ?        S    Nov30   0:00 init [2]  
    root         2  0.0  0.0     0    0 ?        S    Nov30   0:00 [keventd]
    root         3  0.0  0.0     0    0 ?        SN   Nov30   0:00 [ksoftirqd_CPU0]
    root         4  0.0  0.0     0    0 ?        S    Nov30   0:02 [kswapd]
    root         5  0.0  0.0     0    0 ?        S    Nov30   0:00 [bdflush]
    root         6  0.0  0.0     0    0 ?        S    Nov30   0:00 [kupdated]
    root        99  0.0  0.0     0    0 ?        S    Nov30   0:01 [kjournald]
    root       472  0.0  0.0     0    0 ?        S    Nov30   0:00 [khubd]
    root      1338  0.0  0.5  2244  704 ?        Ss   Nov30   0:00 /sbin/syslogd -a /var/lib/named/dev/log
    root      1341  0.0  0.3  2188  464 ?        Ss   Nov30   0:00 /sbin/klogd
    root      1360  0.0  0.3  1656  384 ?        S    Nov30   0:00 /usr/sbin/courierlogger -pid=/var/run/courier/authdaemon/pid -start /usr/lib/co
    root      1361  0.0  0.3  1796  412 ?        S    Nov30   0:00 /usr/lib/courier/authlib/authdaemond.plain
    root      1367  0.0  0.5  1984  656 ?        S    Nov30   0:00 /usr/lib/courier/authlib/authdaemond.plain
    root      1368  0.0  0.5  1984  656 ?        S    Nov30   0:00 /usr/lib/courier/authlib/authdaemond.plain
    root      1369  0.0  0.5  1984  656 ?        S    Nov30   0:00 /usr/lib/courier/authlib/authdaemond.plain
    root      1370  0.0  0.5  1984  656 ?        S    Nov30   0:00 /usr/lib/courier/authlib/authdaemond.plain
    root      1371  0.0  0.5  1984  656 ?        S    Nov30   0:00 /usr/lib/courier/authlib/authdaemond.plain
    root      1373  0.0  0.4  2464  520 ?        S    Nov30   0:00 /usr/sbin/couriertcpd -address=0 -stderrlogger=/usr/sbin/courierlogger -maxproc
    root      1377  0.0  0.3  1664  452 ?        S    Nov30   0:00 /usr/sbin/courierlogger imaplogin
    root      1387  0.0  0.4  2464  520 ?        S    Nov30   0:00 /usr/sbin/couriertcpd -address=0 -stderrlogger=/usr/sbin/courierlogger -stderrl
    root      1391  0.0  0.3  1664  452 ?        S    Nov30   0:00 /usr/sbin/courierlogger imapd-ssl
    root      1396  0.0  0.4  2464  516 ?        S    Nov30   0:00 /usr/sbin/couriertcpd -pid=/var/run/courier/pop3d.pid -stderrlogger=/usr/sbin/c
    root      1404  0.0  0.3  1660  448 ?        S    Nov30   0:00 /usr/sbin/courierlogger courierpop3login
    root      1410  0.0  0.3  2464  500 ?        S    Nov30   0:00 /usr/sbin/couriertcpd -pid=/var/run/courier/pop3d-ssl.pid -stderrlogger=/usr/sb
    root      1414  0.0  0.3  1660  448 ?        S    Nov30   0:00 /usr/sbin/courierlogger pop3d-ssl
    root      1620  0.0  0.5  3720  744 ?        Ss   Nov30   0:00 /usr/sbin/sshd
    daemon    1634  0.0  0.3  1672  492 ?        Ss   Nov30   0:00 /usr/sbin/atd
    maroon    1650  0.0  0.8  2992 1048 tty1     Ss   Nov30   0:00 -bash
    root      1651  0.0  0.3  1484  408 tty2     Ss+  Nov30   0:00 /sbin/getty 38400 tty2
    root      1652  0.0  0.3  1484  408 tty3     Ss+  Nov30   0:00 /sbin/getty 38400 tty3
    root      1653  0.0  0.3  1484  408 tty4     Ss+  Nov30   0:00 /sbin/getty 38400 tty4
    root      1654  0.0  0.3  1484  408 tty5     Ss+  Nov30   0:00 /sbin/getty 38400 tty5
    root      1655  0.0  0.3  1484  408 tty6     Ss+  Nov30   0:00 /sbin/getty 38400 tty6
    root      1665  0.0  1.1  3072 1500 tty1     S+   Nov30   0:00 bash
    root     17277  0.0  1.0  2736 1336 tty1     S    Nov30   0:00 /bin/sh /usr/bin/mysqld_safe
    root     17313  0.0  1.0  2736 1280 tty1     S    Nov30   0:00 /bin/sh /usr/bin/mysqld_safe
    mysql    17314  0.0 12.5 73900 15792 tty1    S    Nov30   0:00 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-fil
    root     17315  0.0  0.4  1764  536 tty1     S    Nov30   0:00 logger -p daemon.err -t mysqld_safe -i -t mysqld
    mysql    17316  0.0 12.5 73900 15792 tty1    S    Nov30   0:00 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-fil
    mysql    17317  0.0 12.5 73900 15792 tty1    S    Nov30   0:00 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-fil
    mysql    17318  0.0 12.5 73900 15792 tty1    S    Nov30   0:00 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-fil
    mysql    17319  0.0 12.5 73900 15792 tty1    S    Nov30   0:00 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-fil
    mysql    17320  0.0 12.5 73900 15792 tty1    S    Nov30   0:00 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-fil
    mysql    17321  0.0 12.5 73900 15792 tty1    S    Nov30   0:00 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-fil
    mysql    17322  0.0 12.5 73900 15792 tty1    S    Nov30   0:00 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-fil
    mysql    17323  0.0 12.5 73900 15792 tty1    S    Nov30   0:00 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-fil
    mysql    17324  0.0 12.5 73900 15792 tty1    S    Nov30   0:00 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-fil
    root     17590  0.0  0.6  1756  820 ?        Ss   Nov30   0:00 /usr/sbin/cron
    root     17825  0.0  4.8 10828 6044 ?        Ss   Nov30   0:00 /root/ispconfig/httpd/bin/ispconfig_httpd -DSSL
    root     17826  0.0  0.9  2712 1188 tty1     S    Nov30   0:00 /bin/bash /root/ispconfig/sv/ispconfig_wconf
    admispc  17834  0.0  5.4 12752 6868 ?        S    Nov30   0:11 /root/ispconfig/httpd/bin/ispconfig_httpd -DSSL
    admispc  18005  0.0  0.6  2492  840 ?        Ss   Nov30   0:00 /home/admispconfig/ispconfig/tools/clamav/bin/freshclam -d -c 10 --datadir=/hom
    admispc  18020  0.0  5.5 12888 6964 ?        S    Nov30   0:11 /root/ispconfig/httpd/bin/ispconfig_httpd -DSSL
    nobody   18695  0.0  1.3  4764 1680 ?        Ss   Nov30   0:00 proftpd: (accepting connections)
    root     21222  0.0  7.3 23276 9288 ?        Ss   Nov30   0:00 /usr/sbin/apache2 -k start -DSSL
    root     21223  0.0  0.3  1608  412 ?        S    Nov30   0:00 /root/ispconfig/cronolog --symlink=/var/log/httpd/ispconfig_access_log /var/log
    www-data 21224  0.0  4.2 23408 5344 ?        S    Nov30   0:00 /usr/sbin/apache2 -k start -DSSL
    www-data 21225  0.0  6.9 23408 8744 ?        S    Nov30   0:00 /usr/sbin/apache2 -k start -DSSL
    www-data 21226  0.0  6.8 23276 8580 ?        S    Nov30   0:00 /usr/sbin/apache2 -k start -DSSL
    www-data 21227  0.0  6.7 23276 8460 ?        S    Nov30   0:00 /usr/sbin/apache2 -k start -DSSL
    www-data 21228  0.0  6.7 23276 8528 ?        S    Nov30   0:00 /usr/sbin/apache2 -k start -DSSL
    root      2947  0.0  1.0  3656 1328 ?        Ss   Dec01   0:00 /usr/lib/postfix/master
    postfix   2951  0.0  0.9  2996 1212 ?        S    Dec01   0:00 qmgr -l -t fifo -u -c
    bind      3721  0.0  2.2 11276 2788 ?        Ss   Dec01   0:00 /usr/sbin/named -u bind -t /var/lib/named
    bind      3722  0.0  2.2 11276 2788 ?        S    Dec01   0:00 /usr/sbin/named -u bind -t /var/lib/named
    bind      3723  0.0  2.2 11276 2788 ?        S    Dec01   0:00 /usr/sbin/named -u bind -t /var/lib/named
    bind      3724  0.0  2.2 11276 2788 ?        S    Dec01   0:00 /usr/sbin/named -u bind -t /var/lib/named
    bind      3725  0.0  2.2 11276 2788 ?        S    Dec01   0:00 /usr/sbin/named -u bind -t /var/lib/named
    root     10060  0.0  1.5  7176 1940 ?        Ss   Dec01   0:00 sshd: maroon [priv]
    root     10062  0.0  1.5  7176 1940 ?        S    Dec01   0:00 sshd: maroon [priv]
    maroon   10066  0.0  1.6  7184 2036 ?        S    Dec01   0:00 sshd: maroon@pts/0
    maroon   10067  0.0  1.3  2972 1636 pts/0    Ss   Dec01   0:00 -bash
    root     10072  0.0  1.3  3016 1688 pts/0    S+   Dec01   0:00 bash
    postfix  25582  0.0  0.8  2964 1100 ?        S    15:07   0:00 pickup -l -t fifo -u -c
    root     26436  0.0  1.4  7176 1880 ?        Ss   16:15   0:00 sshd: maroon [priv]
    root     26438  0.0  1.4  7176 1880 ?        S    16:15   0:00 sshd: maroon [priv]
    maroon   26442  0.1  1.5  7184 2000 ?        S    16:15   0:00 sshd: maroon@pts/1
    maroon   26443  0.1  1.2  2960 1624 pts/1    Ss   16:15   0:00 -bash
    root     26448  0.1  1.3  3000 1636 pts/1    S    16:15   0:00 bash
    root     26452  0.0  0.4  2304  552 tty1     S    16:16   0:00 sleep 10
    root     26453  0.0  0.6  2480  860 pts/1    R+   16:16   0:00 ps aux
    
    thanks again

    Best Regards,
     
  16. falko

    falko Super Moderator ISPConfig Developer

    Ok, saslauthd isn't running. Start it:
    Code:
    /etc/init.d/saslauthd start
     
  17. maroonworks

    maroonworks New Member

    Falko,

    still the same problem

    i've start the saslauth daemon !!! I got no message tht the service has been started or smthn like tht ....

    what do you think the problem is?

    thx
     
  18. falko

    falko Super Moderator ISPConfig Developer

    Then I guess saslauthd still isn't running... Do you see it when you run
    Code:
    ps aux
    ?

    I suggest that you have a close look at the saslauthd part of the Debian Sarge howto and try to correct your system configuration: http://www.howtoforge.com/perfect_setup_debian_sarge_p4

    I recommend that you use an SSH client like PuTTY (for Windows) so that you can copy and paste all the commands from the tutorial and avoid typos.
     
  19. maroonworks

    maroonworks New Member

    Falko it works great !!

    it was from misconfiguration

    thanks for everything

    Regards,
     

Share This Page