Dvd Not Burning right

Discussion in 'Installation/Configuration' started by ek49, Dec 2, 2007.

  1. ek49

    ek49 New Member

    Help!!!
    i have ruined 6 dvd's already.
    i am trying to burn dvd's using k3b and or nero linux
    on both they burn about 12 % and then fail and eject the disc.
    using fedora 8 k3b that came with fedora.
    got a error 5 using k3b
    and a error using nero but no error code
    dvd's i use are tayo yeudon 8x +r
    is there something in terminal that i can type in to correct this?

    Correction: I did pull this out of the log on nero:

    05:25:57 PM #23 TRANSFER 4 File TransferWriteFileItem.cpp, Line 168
    Error reading file
    /home/Radon/DVDFab/MainMovie/HOT ROD AC/VIDEO_TS/VTS_01_1.VOB

    Why would it have trouble reading from my movie folder? Permissions?

    Thanks
     
    Last edited: Dec 2, 2007
  2. falko

    falko Super Moderator ISPConfig Developer

    What's the output of
    Code:
    ls -la /home/Radon/DVDFab/MainMovie/HOT ROD AC/VIDEO_TS
    ?
     
  3. ek49

    ek49 New Member

    [[email protected] ~]$ ls -la /home/Radon/DVDFab/MainMovie/HOT ROD AC/VIDEO_TS
    ls: cannot access /home/Radon/DVDFab/MainMovie/HOT: No such file or directory
    ls: cannot access ROD: No such file or directory
    ls: cannot access AC/VIDEO_TS: No such file or directory
    [[email protected] ~]$


    Which is weird because i can see the files and i can also click on any vob file and play it with mplayer or vlcplayer

    I have 2 gig of memory and
    I also notice my memory at 90%
    is that my swap file memory?
    and do i need to adjust the size of my swap file?
    here is the size of my 150 gig system:

    [[email protected] ~]$ df -h
    Filesystem Size Used Avail Use% Mounted on
    /dev/mapper/VolGroup00-LogVol00
    94G 17G 72G 20% /
    /dev/sda1 198M 25M 163M 14% /boot
    tmpfs 1014M 168K 1014M 1% /dev/shm


    here is the complete log file from nero Linux:

    2CA0-0000-1800-2000-4002-6332-****

    Linux 2.6.23.1-49.fc8
    Nero API version: 7.5.14.9
    Using interface version: 7.5.1.2
    Installed in: /usr/lib/nero/
    Application: Nero AG\Nero Linux
    Internal Version: 7, 5, 14, 9

    Recorder: <PLEXTOR DVDR PX-800A> Version: 1.00 - HA 1 TA 0 - 0.0.0.0
    Adapter driver: <pata_amd> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 2026MB (2075312kB)
    Free physical memory: 199MB (204796kB)
    Memory in use : 90 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    2.12.2007
    NeroAPI
    05:23:58 PM #1 Phase 114 File ExtendedProgress.cpp, Line 537
    DVD-Video files reallocation completed (no file modified)

    05:23:58 PM #2 Phase 111 File ExtendedProgress.cpp, Line 537
    DVD-Video files sorted

    05:23:58 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3341
    First writeable address = 0 (0x00000000)

    05:23:58 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3341
    First writeable address = 0 (0x00000000)

    05:23:59 PM #5 Text 0 File Burncd.cpp, Line 3490
    Turn on Disc-At-Once, using DVD media

    05:24:36 PM #6 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2188031 (486:13.56, 4273MB)

    05:24:36 PM #7 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO

    05:24:36 PM #8 Text 0 File DlgWaitCD.cpp, Line 2952
    Recorder: PLEXTOR DVDR PX-800A, Media type: DVD+R
    Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 3

    05:24:36 PM #9 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Disc not empty. Insert empty disc.
    (Medium in drive: DVD+R. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)

    05:24:36 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 792
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2188032 (2188032) = #2188032/486:13.57
    relocatable, disc pos for caching/writing not required/ required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2188032 blocks [PLEXTOR DVDR PX-800A (H:1 T:0)]
    --------------------------------------------------------------

    05:24:36 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 995
    Prepare [PLEXTOR DVDR PX-800A (H:1 T:0)] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4481089536, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 2188032 | 0 | 0x00
    2188032 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    05:24:36 PM #12 Text 0 File Burncd.cpp, Line 4263
    Caching options: cache CDRom or Network-No, small files-Yes (<32KB)

    05:24:36 PM #13 Phase 24 File ExtendedProgress.cpp, Line 537
    Caching of files started

    05:24:36 PM #14 Text 0 File Burncd.cpp, Line 4382
    Cache writing successful.

    05:24:36 PM #15 Phase 25 File ExtendedProgress.cpp, Line 537
    Caching of files completed

    05:24:36 PM #16 Phase 36 File ExtendedProgress.cpp, Line 537
    Burn process started at 8x (11080 KB/s)

    05:24:36 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2712
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    05:24:36 PM #18 Text 0 File Cdrdrv.cpp, Line 9915
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 3 h
    Disc Manufacturer ID: YUDEN000
    Media type ID: T02
    Product revision number: 0
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8
    23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    05:24:36 PM #19 Text 0 File DVDR.cpp, Line 6720
    Drive: PLEXTOR DVDR PX-800A
    Book Type request [NEC]: DVD-ROM, write to RAM
    select Book Type setting from RAM
    Changing the Book Type was finished successfully, return code 0

    05:24:36 PM #20 CDR -1211 File DVDR.cpp, Line 6393
    Book Type set to: DVD-ROM

    05:24:36 PM #21 Text 0 File DVDPlusRW.cpp, Line 675
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    05:24:36 PM #22 Text 0 File ThreadedTransfer.cpp, Line 269
    Pipe memory size 83836800

    05:25:57 PM #23 TRANSFER 4 File TransferWriteFileItem.cpp, Line 168
    Error reading file
    /home/Radon/DVDFab/MainMovie/HOT ROD AC/VIDEO_TS/VTS_01_1.VOB

    05:25:57 PM #24 TRANSFER -25 File Reader.cpp, Line 270
    Error reading data

    05:25:57 PM #25 Text 0 File Reader.cpp, Line 273
    Exception value: -1

    05:26:16 PM #26 Phase 127 File ExtendedProgress.cpp, Line 537
    Generating DVD high compatibility borders

    05:27:18 PM #27 Text 0 File DVDPlusRW.cpp, Line 935
    EndDAO: Last written address 68576

    05:27:18 PM #28 Phase 129 File ExtendedProgress.cpp, Line 537
    Generating DVD borders completed successfully

    05:27:18 PM #29 Text 0 File DVDR.cpp, Line 6720
    Drive: PLEXTOR DVDR PX-800A
    Book Type request [NEC]: DVD-ROM, write to RAM
    select Book Type setting from RAM
    Changing the Book Type was finished successfully, return code 0

    05:27:18 PM #30 Phase 38 File ExtendedProgress.cpp, Line 537
    Burn process failed at 8x (11080 KB/s)
     
    Last edited: Dec 4, 2007
  4. o.meyer

    o.meyer ISPConfig Developer ISPConfig Developer

    Hi ek49,

    you have to escape the spaces in the path - try:

    ls -la /home/Radon/DVDFab/MainMovie/HOT\ ROD\ AC/VIDEO_TS

    Maybe k3b and nero linux have also problems with the spaces. You should try to remove the spaces or to replace them with underscores (/HOT_ROD_AC/).

    Best regards,

    Olli
     
  5. ek49

    ek49 New Member

    here is what i get when i posted from your suggestion:

    [[email protected] home]# ls -la /home/Radon/DVDFab/MainMovie/HOT\ ROD\ AC/VIDEO_TS
    total 4379312
    drwxrwxr-x 2 Radon Radon 4096 2007-12-01 22:36 .
    drwxrwxr-x 4 Radon Radon 4096 2007-12-01 22:18 ..
    -r--r----- 1 Radon Radon 6144 2007-12-01 22:36 VIDEO_TS.BUP
    -r--r----- 1 Radon Radon 6144 2007-12-01 22:36 VIDEO_TS.IFO
    -r--r----- 1 Radon Radon 57344 2007-12-01 22:36 VTS_01_0.BUP
    -r--r----- 1 Radon Radon 57344 2007-12-01 22:36 VTS_01_0.IFO
    -r--r----- 1 Radon Radon 1073739776 2007-12-01 22:36 VTS_01_1.VOB
    -r--r----- 1 Radon Radon 1073739776 2007-12-01 22:36 VTS_01_2.VOB
    -r--r----- 1 Radon Radon 1073739776 2007-12-01 22:36 VTS_01_3.VOB
    -r--r----- 1 Radon Radon 1073739776 2007-12-01 22:36 VTS_01_4.VOB
    -r--r----- 1 Radon Radon 184901632 2007-12-01 22:36 VTS_01_5.VOB
    [[email protected] home]#

    much better
    now how can I get Nero or k3b to see this?
    actually go in and change the folders name?
    from what i see, from what you are telling me, it hangs up when it gets to Hot Rod AC.
    so just a change to hot rod ac, to: Hot_Rod_AC would enable my burning again?

    If that fixes that, then I have a few more questions for you
    I an a real newb to Linux, (10 days into this), but am a computer geek for windows.
    i am trying to learn and it is so different.
    i have about 10 more issues i am trying to fix
    is there a time we could get together either by instant text or live chat and get me up and running?
    if not then we can do this the old fashion forums way
    thanks again!
     
    Last edited: Dec 4, 2007
  6. falko

    falko Super Moderator ISPConfig Developer

    Please try this:

    Code:
    chmod 644 /home/Radon/DVDFab/MainMovie/HOT\ ROD\ AC/VIDEO_TS/*
    Afterwards Nero and k3b should be able to read the files.
     
  7. ek49

    ek49 New Member

    thank You
    will try it

    Still no luck.
    another coaster.
    now i have a major problem!
    there was a up date in yum for linux kernel and some security updates
    i installed them and now my desktop is foo-bar
    i can't get nvidia to work, says failed, when i go to nvidia settings, says my x-nvidia is not setup so run xnvidia-config
    did that and it put me in text mode on boot up. I need to clear all nvidia drivers and or packages from my system,
    and then correct this. i was using the perfect desktop for my settings for fedora 8. i had a problem with setting up the gnome effects and googled it and had to edit the xorg.cong file and did a repo on the nvidia drivers to get the effects to work
    but after the update, all is messed up. I also cannot use gnome desktop effect because my nvidia isn't setup. A upgrade should not have done this correct? i need help real bad now
    any way we can xchat to get this going? name a time and day or is there a irc channel with guru's on that i can have help me fix this mess?
     
    Last edited: Dec 5, 2007
  8. o.meyer

    o.meyer ISPConfig Developer ISPConfig Developer

    Hi ek49,

    seems that you don't have installed the packages yum-fedorakmod and yum-kernel-module. Please install both to prevent such problems in the future. It would also be a good idea to install yum-skip-broken and yum-fastestmirror.

    yum -y install yum-fedorakmod yum-kernel-module yum-skip-broken yum-fastestmirror

    Now your actual problem. A new kernel has been installed although there was no fitting kmod-nvidia-package available for this new kernel. So start/restart your computer and hit a key when the grub-screen appears - select the older kernel and start with it. Afterwards remove the new kernel or always start with the older kernel till the kmod-nvidia-package is available for the new one. In the future the two yum-plugins that I mentioned first will prevent such problems - If there is a new kernel available without the fitting kmod-nvidia-package you'll not be able to install the kernel with yum (you'll get a warning).

    Have you used this howto -> http://www.howtoforge.com/installation-guide-fedora8-desktop for your setup? There are all things explained - including the yum-plugins, the livna-repo and the nvidia-setup (+compiz-fusion).

    PS: I sent you a private message .)

    Best regards,

    Olli
     
    Last edited: Dec 5, 2007
  9. ek49

    ek49 New Member

    I installed fedora 8 using the perfect desktop on the main page in fedora 8
    i had everything working except the dvd drives and i need lessons on getting around in terminal. Will revert back to the old kernel
     

Share This Page