drbd error in debian sarge

Discussion in 'HOWTO-Related Questions' started by gg234, Jul 31, 2006.

  1. gg234

    gg234 New Member

    Hi,

    I ma trying configure drbd in debian sarge i ahve configured the /etc/drbd.conf file as suggested in NFS how to when i try to run the following command

    #drbdadm up all

    Lower device (/dev/sda2) is already mounted
    Command '/sbin/drbdsetup /dev/drbd0 disk /dev/sda2 internal -1 --on-io-error=detach' terminated with exit code 20

    I have not done anything on creating new partition for this is it necessary to create new partition for drbd or we can use internal option.

    My configuration as follows

    on test {
    device /dev/drbd0;
    disk /dev/sda2;
    address 172.2.5.213:7788;
    meta-disk internal;

    # meta-disk is either 'internal' or '/dev/ice/name [idx]'
    #
    # You can use a single block device to store meta-data
    # of multiple DRBD's.
    # E.g. use meta-disk /dev/hde6[0]; and meta-disk /dev/hde6[1];
    # for two different resources. In this case the meta-disk
    # would need to be at least 256 MB in size.
    #
    # 'internal' means, that the last 128 MB of the lower device
    # are used to store the meta-data.
    # You must not give an index with 'internal'.
    }

    on test1 {
    device /dev/drbd0;
    disk /dev/sda2;
    address 172.2.5.232:7788;
    meta-disk internal;
    }
    }

    i really need some help here

    thanks for your help
     
  2. falko

    falko Super Moderator ISPConfig Developer

    You don't have any resource string in drbd.conf. The one from the tutorial looks like this:

    Code:
    resource r0 {
    
     protocol C;
     incon-degr-cmd "halt -f";
    
     startup {
        degr-wfc-timeout 120;    # 2 minutes.
      }
    
      disk {
        on-io-error   detach;
      }
    
      net {
    
      }
    
      syncer {
    
        rate 10M;
    
        group 1;
    
        al-extents 257;
      }
    
     on server1 {                # ** EDIT ** the hostname of server 1 (uname -n)
       device     /dev/drbd0;        #
       disk       /dev/sda8;         # ** EDIT ** data partition on server 1
       address    192.168.0.172:7788; # ** EDIT ** IP address on server 1
       meta-disk  /dev/sda7[0];      # ** EDIT ** 128MB partition for DRBD on server 1
      }
    
     on server2 {                # ** EDIT ** the hostname of server 2 (uname -n)
       device    /dev/drbd0;         #
       disk      /dev/sda8;          # ** EDIT ** data partition on server 2
       address   192.168.0.173:7788;  # ** EDIT ** IP address on server 2
       meta-disk /dev/sda7[0];       # ** EDIT ** 128MB partition for DRBD on server 2
      }
    
    }
     

Share This Page