Debian install stuck on Postfix config

Discussion in 'ISPConfig 3 Priority Support' started by ktownmods, Nov 18, 2019.

  1. ktownmods

    ktownmods Member

    Hey,

    i use this tutorial https://www.howtoforge.com/perfect-...ostfix-dovecot-mysql-rkhunter-andnbspbinutils, but at the point where i should uncomment this:

    Code:
    [...]
    submission inet n - y - - smtpd
     -o syslog_name=postfix/submission
     -o smtpd_tls_security_level=encrypt
     -o smtpd_sasl_auth_enable=yes
     -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    # -o smtpd_reject_unlisted_recipient=no
    # -o smtpd_client_restrictions=$mua_client_restrictions
    # -o smtpd_helo_restrictions=$mua_helo_restrictions
    # -o smtpd_sender_restrictions=$mua_sender_restrictions
    # -o smtpd_recipient_restrictions=
    # -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
    # -o milter_macro_daemon_name=ORIGINATING
    smtps inet n - y - - smtpd
     -o syslog_name=postfix/smtps
     -o smtpd_tls_wrappermode=yes
     -o smtpd_sasl_auth_enable=yes
     -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    # -o smtpd_reject_unlisted_recipient=no
    # -o smtpd_client_restrictions=$mua_client_restrictions
    # -o smtpd_helo_restrictions=$mua_helo_restrictions
    # -o smtpd_sender_restrictions=$mua_sender_restrictions
    # -o smtpd_recipient_restrictions=
    # -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
    # -o milter_macro_daemon_name=ORIGINATING
    [...]
    my master.cf is different:

    Code:
    #
    # Postfix master process configuration file.  For details on the format
    # of the file, see the master(5) manual page (command: "man 5 master" or
    # on-line: http://www.postfix.org/master.5.html).
    #
    # Do not forget to execute "postfix reload" after editing this file.
    #
    # ==========================================================================
    # service type  private unpriv  chroot  wakeup  maxproc command + args
    #               (yes)   (yes)   (no)    (never) (100)
    # ==========================================================================
    smtp      inet  n       -       y       -       -       smtpd
    #smtp      inet  n       -       y       -       1       postscreen
    #smtpd     pass  -       -       y       -       -       smtpd
    #dnsblog   unix  -       -       y       -       0       dnsblog
    #tlsproxy  unix  -       -       y       -       0       tlsproxy
    #submission inet n       -       y       -       -       smtpd
    #  -o syslog_name=postfix/submission
    #  -o smtpd_tls_security_level=encrypt
    #  -o smtpd_sasl_auth_enable=yes
    #  -o smtpd_tls_auth_only=yes
    #  -o smtpd_reject_unlisted_recipient=no
    #  -o smtpd_client_restrictions=$mua_client_restrictions
    #  -o smtpd_helo_restrictions=$mua_helo_restrictions
    #  -o smtpd_sender_restrictions=$mua_sender_restrictions
    #  -o smtpd_recipient_restrictions=
    #  -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
    #  -o milter_macro_daemon_name=ORIGINATING
    #smtps     inet  n       -       y       -       -       smtpd
    #  -o syslog_name=postfix/smtps
    #  -o smtpd_tls_wrappermode=yes
    #  -o smtpd_sasl_auth_enable=yes
    #  -o smtpd_reject_unlisted_recipient=no
    #  -o smtpd_client_restrictions=$mua_client_restrictions
    #  -o smtpd_helo_restrictions=$mua_helo_restrictions
    #  -o smtpd_sender_restrictions=$mua_sender_restrictions
    #  -o smtpd_recipient_restrictions=
    #  -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
    #  -o milter_macro_daemon_name=ORIGINATING
    #628       inet  n       -       y       -       -       qmqpd
    pickup    unix  n       -       y       60      1       pickup
    cleanup   unix  n       -       y       -       0       cleanup
    qmgr      unix  n       -       n       300     1       qmgr
    #qmgr     unix  n       -       n       300     1       oqmgr
    tlsmgr    unix  -       -       y       1000?   1       tlsmgr
    rewrite   unix  -       -       y       -       -       trivial-rewrite
    bounce    unix  -       -       y       -       0       bounce
    defer     unix  -       -       y       -       0       bounce
    trace     unix  -       -       y       -       0       bounce
    verify    unix  -       -       y       -       1       verify
    flush     unix  n       -       y       1000?   0       flush
    proxymap  unix  -       -       n       -       -       proxymap
    proxywrite unix -       -       n       -       1       proxymap
    smtp      unix  -       -       y       -       -       smtp
    relay     unix  -       -       y       -       -       smtp
            -o syslog_name=postfix/$service_name
    #       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
    showq     unix  n       -       y       -       -       showq
    error     unix  -       -       y       -       -       error
    retry     unix  -       -       y       -       -       error
    discard   unix  -       -       y       -       -       discard
    local     unix  -       n       n       -       -       local
    virtual   unix  -       n       n       -       -       virtual
    lmtp      unix  -       -       y       -       -       lmtp
    anvil     unix  -       -       y       -       1       anvil
    scache    unix  -       -       y       -       1       scache
    postlog   unix-dgram n  -       n       -       1       postlogd
    #
    # ====================================================================
    # Interfaces to non-Postfix software. Be sure to examine the manual
    # pages of the non-Postfix software to find out what options it wants.
    #
    # Many of the following services use the Postfix pipe(8) delivery
    # agent.  See the pipe(8) man page for information about ${recipient}
    # and other message envelope options.
    # ====================================================================
    #
    # maildrop. See the Postfix MAILDROP_README file for details.
    # Also specify in main.cf: maildrop_destination_recipient_limit=1
    #
    maildrop  unix  -       n       n       -       -       pipe
      flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
    #
    # ====================================================================
    #
    # Recent Cyrus versions can use the existing "lmtp" master.cf entry.
    #
    # Specify in cyrus.conf:
    #   lmtp    cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
    #
    # Specify in main.cf one or more of the following:
    #  mailbox_transport = lmtp:inet:localhost
    #  virtual_transport = lmtp:inet:localhost
    #
    # ====================================================================
    #
    # Cyrus 2.1.5 (Amos Gouaux)
    # Also specify in main.cf: cyrus_destination_recipient_limit=1
    #
    #cyrus     unix  -       n       n       -       -       pipe
    #  user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
    #
    # ====================================================================
    # Old example of delivery via Cyrus.
    #
    #old-cyrus unix  -       n       n       -       -       pipe
    #  flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
    #
    # ====================================================================
    #
    # See the Postfix UUCP_README file for configuration details.
    #
    uucp      unix  -       n       n       -       -       pipe
      flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
    #
    # Other external delivery methods.
    #
    ifmail    unix  -       n       n       -       -       pipe
      flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
    bsmtp     unix  -       n       n       -       -       pipe
      flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
    scalemail-backend unix    -    n    n    -    2    pipe
      flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
    mailman   unix  -       n       n       -       -       pipe
      flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
      ${nexthop} ${user}
    
    
    I use Debian 10.2
    what to do know?
     
  2. till

    till Super Moderator Staff Member ISPConfig Developer

    Your dovecot conf is not different, the tutorial just shows the part that need to be changed. Just edit the lines after 'smtps' and'submission' to look likes the ones from the tutorial
     
  3. ktownmods

    ktownmods Member

    But where is not the submissions

    Code:
     -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    
     
    Last edited: Nov 18, 2019
  4. till

    till Super Moderator Staff Member ISPConfig Developer

    This line gets added by you. Cite from the tutorial "Uncomment the submission and smtps sections as follows and add lines where necessary".
     
  5. ktownmods

    ktownmods Member

    Jesus...

    Haha
     
  6. ktownmods

    ktownmods Member

    Hey, i am now on the part with roundcube

    Code:
    Configure database for roundcube with dbconfig.common? <-- yes
    MySQL application password for roundcube: <-- press enter
    Password of the databases administrative user: <-- enter the MySQL root password here.
    But this:

    Code:
    Password of the databases administrative user: <-- enter the MySQL root password here.
    Dont show
     
  7. till

    till Super Moderator Staff Member ISPConfig Developer

    That's ok, the amount of questions can differ.
     
    ktownmods likes this.

Share This Page