Connecting to ISPConfig via domain name

Discussion in 'General' started by matman42, Dec 4, 2006.

  1. matman42

    matman42 New Member

    I fairly new to this. I've setup a Ubuntu server using the Perfect setup docs and I installed ISPConfig. I can get to the admin screen if I go through https://my.static.WAN.IP.address:81, but I can't if I try https://www.my.domain:81. I've checked my host file and everything appears to be setup correctly there. I made sure the router has access to that port. Any other ideas?
     
  2. mojosound

    mojosound New Member

    firewall?

    Can you check to see that port 81 is not blocked by a firewall? Also, www.my.domain.com seems unusual to me. http://my.domain.com seems more like what I am used to seeing.
     
  3. matman42

    matman42 New Member

    Port 81 isn't blocked by a firewall. If it wasn't it wouldn't let me resolve using the WAN IP address.

    As far as the domain name, it was more for illustrative purposes. The WAN IP resolves, but the domain name gives me a "problem loading page" error message.
     
  4. till

    till Super Moderator Staff Member ISPConfig Developer

    Does my.static.WAN.IP.address and www.my.domain point to the same IP address? ISPConfig listens on all IP addresses on your server, so it is not domain specific as long as both domains point to your server IP.
     
  5. matman42

    matman42 New Member

    I'm not sure I understand the question or more to the point how would I be able to tell?

    Here is how I'm setup. I have the Ubuntu server set behind a router on my network. I currently have all web traffic pointed to the server via the NAT in the router. I registered a domain with GoDaddy and have it forwarded to the static IP address that is provided by my cable company. If I open a browser window and type the static IP address specifying port 81 it pulls up ISPConfig. If I type in the domain name I registered I get an error message.

    Just in case here are the results when I ran netstat -tap

    Active Internet connections (servers and established)
    Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
    tcp 0 0 *:mysql *:* LISTEN 8184/mysqld
    tcp 0 0 *:81 *:* LISTEN 6532/ispconfig_http
    tcp 0 0 www.bandbtech.ne:domain *:* LISTEN 6768/named
    tcp 0 0 localhost:domain *:* LISTEN 6768/named
    tcp 0 0 *:smtp *:* LISTEN 28373/master
    tcp 0 0 localhost:953 *:* LISTEN 6768/named
    tcp6 0 0 *:imaps *:* LISTEN 7849/couriertcpd
    tcp6 0 0 *:pop3s *:* LISTEN 7752/couriertcpd
    tcp6 0 0 *:pop3 *:* LISTEN 7689/couriertcpd
    tcp6 0 0 *:imap2 *:* LISTEN 7794/couriertcpd
    tcp6 0 0 *:www *:* LISTEN 22520/apache2
    tcp6 0 0 *:ftp *:* LISTEN 27035/proftpd: (acc
    tcp6 0 0 *:ssh *:* LISTEN 4352/sshd
    tcp6 0 0 *:smtp *:* LISTEN 28373/master
    tcp6 0 0 ip6-localhost:953 *:* LISTEN 6768/named
    tcp6 0 0 *:https *:* LISTEN 22520/apache2
    tcp6 0 52 www.bandbtech.net:ssh www.bandbtech.net:3934 ESTABLISHED591/sshd: mdbrie01
    [email protected]:/home/mdbrie01# Active Internet connections (servers and established)
     
  6. falko

    falko Super Moderator ISPConfig Developer

    Does
    Code:
    dig www.my.domain
    show that the domain is pointing to your WAN IP address?
     
  7. fobicodam

    fobicodam ISPConfig Developer ISPConfig Developer

    Can you do a :

    telnet www.yourdomain.com 81

    Does it connect? the resolve thing is outside your control, if the dns is well configurated then it will resolve the name, even when the server is down..
     

Share This Page