Can't access the MyDNSConfig page

Discussion in 'General' started by mski35, Sep 1, 2009.

  1. mski35

    mski35 New Member

    I followed the installation instructions for "Installing MyDNS & MyDNSConfig 3 On Fedora 10" and all seemed to go fine with the initial configuration. I only made one change from the defaults:

    Full qualified hostname (FQDN) of the server, eg server1.domain.tld [localhost.localdomain]:

    I choose to enter what will be the fully qualified domain name instead of taking the default.

    So once the install completed I checked to make sure I could access
    HTML:
    http://localhost:8080
    locally which came up fine however from a different computer I tried accessing via IP and by hostname:8080 but receive browser error:

    The connection was reset

    Interestingly enough I get to the generic Fedora test page if I drop :8080. So I'm fairly confident that the issue is either firewall related or has something to do with choosing the FQDN at setup.

    I set SELinux to disabled for the moment and rebooted and added a firewall rule for port 8080. Below is the output of iptable -L:

    Code:
    [root@ns-srv1 ~]# iptables -L
    Chain INPUT (policy ACCEPT)
    target     prot opt source               destination         
    ACCEPT     all  --  anywhere             anywhere            state RELATED,ESTABLISHED 
    ACCEPT     icmp --  anywhere             anywhere            
    ACCEPT     all  --  anywhere             anywhere            
    ACCEPT     tcp  --  anywhere             anywhere            state NEW tcp dpt:ssh 
    ACCEPT     tcp  --  anywhere             anywhere            state NEW tcp dpt:http 
    ACCEPT     tcp  --  anywhere             anywhere            state NEW tcp dpt:webcache 
    REJECT     all  --  anywhere             anywhere            reject-with icmp-host-prohibited 
    
    Chain FORWARD (policy ACCEPT)
    target     prot opt source               destination         
    REJECT     all  --  anywhere             anywhere            reject-with icmp-host-prohibited 
    
    Chain OUTPUT (policy ACCEPT)
    target     prot opt source               destination
    Please let me know what else I can provide to get this fixed.
     
  2. falko

    falko Super Moderator Howtoforge Staff Moderator HowtoForge Supporter ISPConfig Developer

    What's the output of
    Code:
    netstat -tap
    ?
     

Share This Page