Cannot sent mail after upgrade CentOS to 5.5 & ISPC to 3.0.2.2

Discussion in 'Installation/Configuration' started by Nicram, Aug 18, 2010.

  1. Nicram

    Nicram Member

    Hello.
    What i did was update with "yum update" the CentOS 5.4 x86_64 (excluding lzo and postfix) to 5.5 x86_64.
    Then after reboot, update ispconfig.
    Then i try to receive email (works very well), and try to sent email, then there is eror, e_mail client say that password is wrong, i go to server and the log says:
    Code:
    Aug 18 02:10:36 hosting postfix/smtpd[14175]: connect from dynamic-78-8-230-73.ssp.dialog.net.pl[78.8.230.73]
    Aug 18 02:10:36 hosting postfix/smtpd[14175]: warning: SASL authentication failure: Password verification failed
    Aug 18 02:10:36 hosting postfix/smtpd[14175]: warning: dynamic-78-8-230-73.ssp.dialog.net.pl[78.8.230.73]: SASL PLAIN authentication failed: authentication failure
    Aug 18 02:10:37 hosting postfix/smtpd[14175]: warning: dynamic-78-8-230-73.ssp.dialog.net.pl[78.8.230.73]: SASL LOGIN authentication failed: authentication failure
    Aug 18 02:10:40 hosting postfix/smtpd[14175]: disconnect from dynamic-78-8-230-73.ssp.dialog.net.pl[78.8.230.73]
    I have checked and postfix should work fine, to be sure i recompiled it again (with mysql and pathes like in howto), still same error.

    Well i cannot say, what is the reason, is it CentOS update problem, or ispconfig, but, i would like to ask, how file /usr/lib/sasl2/smtpd.conf should look inside? It may be the problem, or if my looks same, maybe it is not. Please help :)

    my /usr/lib/sasl2/smtpd.conf:
    Code:
    pwcheck_method: authdaemond
    log_level: 3
    mech_list: PLAIN LOGIN
    authdaemond_path:/var/spool/authdaemon/socket
    master.cf:
    Code:
    #
    # Postfix master process configuration file.  For details on the format
    # of the file, see the master(5) manual page (command: "man 5 master").
    #
    # ==========================================================================
    # service type  private unpriv  chroot  wakeup  maxproc command + args
    #               (yes)   (yes)   (yes)   (never) (100)
    # ==========================================================================
    smtp      inet  n       -       n       -       -       smtpd
    submission inet n       -       n       -       -       smtpd
    #  -o smtpd_enforce_tls=yes
    #  -o smtpd_sasl_auth_enable=yes
    #  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    smtps     inet  n       -       n       -       -       smtpd
    #  -o smtpd_tls_wrappermode=yes
    #  -o smtpd_sasl_auth_enable=yes
    #  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    #628      inet  n       -       n       -       -       qmqpd
    pickup    fifo  n       -       n       60      1       pickup
    cleanup   unix  n       -       n       -       0       cleanup
    qmgr      fifo  n       -       n       300     1       qmgr
    #qmgr     fifo  n       -       n       300     1       oqmgr
    tlsmgr    unix  -       -       n       1000?   1       tlsmgr
    rewrite   unix  -       -       n       -       -       trivial-rewrite
    bounce    unix  -       -       n       -       0       bounce
    defer     unix  -       -       n       -       0       bounce
    trace     unix  -       -       n       -       0       bounce
    verify    unix  -       -       n       -       1       verify
    flush     unix  n       -       n       1000?   0       flush
    proxymap  unix  -       -       n       -       -       proxymap
    smtp      unix  -       -       n       -       -       smtp
    # When relaying mail as backup MX, disable fallback_relay to avoid MX loops
    relay     unix  -       -       n       -       -       smtp
    	-o fallback_relay=
    #       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
    showq     unix  n       -       n       -       -       showq
    error     unix  -       -       n       -       -       error
    discard   unix  -       -       n       -       -       discard
    local     unix  -       n       n       -       -       local
    virtual   unix  -       n       n       -       -       virtual
    lmtp      unix  -       -       n       -       -       lmtp
    anvil     unix  -       -       n       -       1       anvil
    scache	  unix	-	-	n	-	1	scache
    #
    # ====================================================================
    # Interfaces to non-Postfix software. Be sure to examine the manual
    # pages of the non-Postfix software to find out what options it wants.
    #
    # Many of the following services use the Postfix pipe(8) delivery
    # agent.  See the pipe(8) man page for information about ${recipient}
    # and other message envelope options.
    # ====================================================================
    #
    # maildrop. See the Postfix MAILDROP_README file for details.
    # Also specify in main.cf: maildrop_destination_recipient_limit=1
    #
    maildrop  unix  -       n       n       -       -       pipe
      flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient} ${extension} ${recipient} ${user} ${nexthop} ${sender}
    #
    # The Cyrus deliver program has changed incompatibly, multiple times.
    #
    old-cyrus unix  -       n       n       -       -       pipe
      flags=R user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -m ${extension} ${user}
    # Cyrus 2.1.5 (Amos Gouaux)
    # Also specify in main.cf: cyrus_destination_recipient_limit=1
    cyrus     unix  -       n       n       -       -       pipe
      user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -r ${sender} -m ${extension} ${user}
    #
    # See the Postfix UUCP_README file for configuration details.
    #
    uucp      unix  -       n       n       -       -       pipe
      flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
    #
    # Other external delivery methods.
    #
    ifmail    unix  -       n       n       -       -       pipe
      flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
    bsmtp     unix  -       n       n       -       -       pipe
      flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient
    
    amavis unix - - - - 2 smtp
            -o smtp_data_done_timeout=1200
            -o smtp_send_xforward_command=yes
    
    127.0.0.1:10025 inet n - - - - smtpd
            -o content_filter=
            -o local_recipient_maps=
            -o relay_recipient_maps=
            -o smtpd_restriction_classes=
            -o smtpd_client_restrictions=
            -o smtpd_helo_restrictions=
            -o smtpd_sender_restrictions=
            -o smtpd_recipient_restrictions=permit_mynetworks,reject
            -o mynetworks=127.0.0.0/8
            -o strict_rfc821_envelopes=yes
            -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks
            -o smtpd_bind_address=127.0.0.1
    
    main.cf:
    Code:
    queue_directory = /var/spool/postfix
    command_directory = /usr/sbin
    daemon_directory = /usr/libexec/postfix
    mail_owner = postfix
    mydomain = myrealdomain.com
    inet_interfaces = all
    mydestination = myrealdomain.com, localhost, localhost.localdomain
    unknown_local_recipient_reject_code = 550
    alias_maps = hash:/etc/aliases
    alias_database = hash:/etc/aliases
    debug_peer_level = 2
    debugger_command =
    sendmail_path = /usr/sbin/sendmail.postfix
    newaliases_path = /usr/bin/newaliases.postfix
    mailq_path = /usr/bin/mailq.postfix
    setgid_group = postdrop
    html_directory = no
    manpage_directory = /usr/share/man
    sample_directory = /usr/share/doc/postfix-2.3.3/samples
    readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES
    myhostname = myrealdomain.com
    mynetworks = 127.0.0.0/8 [::1]/128
    virtual_alias_domains = 
    virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, mysql:/etc/postfix/mysql-virtual_email2email.cf
    virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf
    virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf
    virtual_mailbox_base = /var/vmail
    virtual_uid_maps = static:5000
    virtual_gid_maps = static:5000
    smtpd_sasl_auth_enable = yes
    broken_sasl_auth_clients = yes
    smtpd_sasl_authenticated_header = yes
    smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, check_recipient_access mysql:/etc/postfix/mysql-virtual_recipient.cf, reject_unauth_destination
    smtpd_use_tls = yes
    smtpd_tls_security_level = may
    smtpd_tls_cert_file = /etc/postfix/smtpd.cert
    smtpd_tls_key_file = /etc/postfix/smtpd.key
    transport_maps = proxy:mysql:/etc/postfix/mysql-virtual_transports.cf
    relay_domains = mysql:/etc/postfix/mysql-virtual_relaydomains.cf
    virtual_create_maildirsize = yes
    virtual_maildir_extended = yes
    virtual_mailbox_limit_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailbox_limit_maps.cf
    virtual_mailbox_limit_override = yes
    virtual_maildir_limit_message = "The user you are trying to reach is over quota."
    virtual_overquota_bounce = yes
    proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $virtual_mailbox_limit_maps
    smtpd_sender_restrictions = check_sender_access mysql:/etc/postfix/mysql-virtual_sender.cf
    smtpd_client_restrictions = check_client_access mysql:/etc/postfix/mysql-virtual_client.cf
    maildrop_destination_concurrency_limit = 1
    maildrop_destination_recipient_limit = 1
    virtual_transport = maildrop
    header_checks = regexp:/etc/postfix/header_checks
    mime_header_checks = regexp:/etc/postfix/mime_header_checks
    nested_header_checks = regexp:/etc/postfix/nested_header_checks
    body_checks = regexp:/etc/postfix/body_checks
    content_filter = amavis:[127.0.0.1]:10024
    receive_override_options = no_address_mappings
    relayhost = 
    mailbox_size_limit = 0
    message_size_limit = 0
    relay_recipient_maps = mysql:/etc/postfix/mysql-virtual_relayrecipientmaps.cf
    /etc/init.d/saslauthd beggining of the file:
    Code:
    # Source function library.
    . /etc/init.d/functions
    
    # Source our configuration file for these variables.
    SOCKETDIR=/var/run/saslauthd
    MECH=shadow
    FLAGS=
    if [ -f /etc/sysconfig/saslauthd ] ; then
    	. /etc/sysconfig/saslauthd
    fi
    
    RETVAL=0
    
    # Set up some common variables before we launch into what might be
    # considered boilerplate by now.
    prog=saslauthd
    path=/usr/sbin/saslauthd
    /etc/sysconfig/saslauthd:
    Code:
    # Directory in which to place saslauthd's listening socket, pid file, and so
    # on.  This directory must already exist.
    SOCKETDIR=/var/run/saslauthd
    
    # Mechanism to use when checking passwords.  Run "saslauthd -v" to get a list
    # of which mechanism your installation was compiled with the ablity to use.
    MECH=pam
    
    # Additional flags to pass to saslauthd on the command line.  See saslauthd(8)
    # for the list of accepted flags.
    FLAGS=
    
    more interesting things:
    # yum list installed | grep sasl
    cyrus-sasl.i386 2.1.22-5.el5_4.3 installed
    cyrus-sasl.x86_64 2.1.22-5.el5_4.3 installed
    cyrus-sasl-devel.i386 2.1.22-5.el5_4.3 installed
    cyrus-sasl-devel.x86_64 2.1.22-5.el5_4.3 installed
    cyrus-sasl-lib.i386 2.1.22-5.el5_4.3 installed
    cyrus-sasl-lib.x86_64 2.1.22-5.el5_4.3 installed
    cyrus-sasl-plain.i386 2.1.22-5.el5_4.3 installed
    cyrus-sasl-plain.x86_64 2.1.22-5.el5_4.3 installed

    So here is /usr/lib64/sasl/smtpd.conf:
    Code:
    pwcheck_method: saslauthd
    saslauthd_version: 2
    /usr/lib64/sasl2/smtpd.conf:
    Code:
    pwcheck_method: saslauthd
    Connection on port 25:
    Code:
    telnet localhost 25
    Trying 127.0.0.1...
    Connected to myrealdomain.com (127.0.0.1).
    Escape character is '^]'.
    220 myrealdomain.com ESMTP Postfix
    ehlo localhost
    250-myrealdomain.com
    250-PIPELINING
    250-SIZE
    250-VRFY
    250-ETRN
    250-STARTTLS
    250-AUTH LOGIN PLAIN
    250-AUTH=LOGIN PLAIN
    250-ENHANCEDSTATUSCODES
    250-8BITMIME
    250 DSN
     
    Last edited: Aug 18, 2010
  2. Nicram

    Nicram Member

    2bad i have to reply to myself, well, it is still not working but i investigated things again and what i find was:

    When there was error:
    Code:
    Aug 18 13:45:50 hosting postfix/smtpd[7222]: connect from dynamic-81-168-209-66.ssp.dialog.net.pl[81.168.209.66]
    Aug 18 13:45:56 hosting postfix/smtpd[7222]: warning: SASL authentication failure: Password verification failed
    Aug 18 13:45:56 hosting postfix/smtpd[7222]: warning: dynamic-81-168-209-66.ssp.dialog.net.pl[81.168.209.66]: SASL PLAIN authentication failed: authentication failure
    Aug 18 13:45:56 hosting postfix/smtpd[7222]: warning: dynamic-81-168-209-66.ssp.dialog.net.pl[81.168.209.66]: SASL LOGIN authentication failed: authentication failure 
    I checked /var/log/secure and what was there:
    Code:
    Aug 18 13:37:40 hosting saslauthd[6770]: PAM unable to dlopen(/lib64/security/pam_mysql.so)
    Aug 18 13:37:40 hosting saslauthd[6770]: PAM [error: /lib64/security/pam_mysql.so: cannot open shared object file: No such file or directory]
    Aug 18 13:37:40 hosting saslauthd[6770]: PAM adding faulty module: /lib64/security/pam_mysql.so
    Aug 18 13:37:40 hosting saslauthd[6770]: PAM unable to dlopen(/lib64/security/pam_mysql.so)
    Aug 18 13:37:40 hosting saslauthd[6770]: PAM [error: /lib64/security/pam_mysql.so: cannot open shared object file: No such file or directory]
    Aug 18 13:37:40 hosting saslauthd[6770]: PAM adding faulty module: /lib64/security/pam_mysql.so
    So what i did was:
    # yum install pam_mysql

    After that:
    Code:
    Aug 18 13:45:56 hosting saslauthd[7130]: pam_mysql - SELECT returned no result.
    Aug 18 13:45:56 hosting saslauthd[7130]: pam_mysql - SELECT returned no result.
    Aug 18 13:45:56 hosting saslauthd[7131]: pam_mysql - SELECT returned no result.
    Aug 18 13:45:56 hosting saslauthd[7131]: pam_mysql - SELECT returned no result.
    Aug 18 13:46:01 hosting saslauthd[7132]: pam_mysql - SELECT returned no result.
    Aug 18 13:46:01 hosting saslauthd[7132]: pam_mysql - SELECT returned no result.
    Aug 18 13:46:01 hosting saslauthd[7133]: pam_mysql - SELECT returned no result.
    And still same error when trying to receive msgs :(

    To do more testing i try to send email with squirrel and... it worked without problems, maillog:
    Code:
    Aug 18 14:20:25 hosting postfix/smtpd[9122]: connect from unknown[127.0.0.1]
    Aug 18 12:20:25 hosting postfix/smtpd[9122]: 1B9874718664: client=unknown[127.0.0.1]
    Aug 18 14:20:25 hosting postfix/cleanup[9115]: 1B9874718664: message-id=<[email protected]>
    Aug 18 14:20:25 hosting postfix/qmgr[1966]: 1B9874718664: from=<[email protected]>, size=1452, nrcpt=1 (queue active)
    Aug 18 12:20:25 hosting postfix/smtpd[9122]: disconnect from unknown[127.0.0.1]
    Aug 18 14:20:25 hosting amavis[1982]: (01982-05) Passed CLEAN, MYNETS LOCAL [127.0.0.1] [81.168.209.66] <[email protected]> -> <[email protected]>, Message-ID: <[email protected]>, mail_id: yAUJmkBVFWFo, Hits: -2.9, size: 1014, queued_as: 1B9874718664, 3371 ms
    Aug 18 14:20:25 hosting postfix/smtp[9116]: AD4D3471865A: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=3.4, delays=0.06/0.01/0/3.4, dsn=2.0.0, status=sent (250 2.0.0 Ok, id=01982-05, from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as 1B9874718664)
    Aug 18 14:20:25 hosting postfix/qmgr[1966]: AD4D3471865A: removed
    Aug 18 14:20:28 hosting postfix/smtp[9124]: 1B9874718664: to=<[email protected]>, relay=mx.email.it[212.97.34.36]:25, delay=2.9, delays=0.02/0.01/0.53/2.4, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as 3E17244006)
    Aug 18 14:20:28 hosting postfix/qmgr[1966]: 1B9874718664: removed 
    But still some errors at messages:
    Code:
    Aug 18 14:20:01 hosting postfix/smtpd[9087]: sql_select option missing
    Aug 18 14:20:01 hosting postfix/smtpd[9087]: auxpropfunc error no mechanism available 
    Aug 18 14:20:25 hosting postfix/smtpd[9122]: sql_select option missing
    Aug 18 14:20:25 hosting postfix/smtpd[9122]: auxpropfunc error no mechanism available  
    saslfinger -c:
    Code:
    saslfinger - postfix Cyrus sasl configuration Wed Aug 18 14:35:00 CEST 2010
    version: 1.0.2
    mode: client-side SMTP AUTH
    
    -- basics --
    Postfix: 2.3.3
    System: CentOS release 5.5 (Final)
    
    -- smtp is linked to --
    	libsasl2.so.2 => /usr/lib64/libsasl2.so.2 (0x00002aebeff91000)
    
    -- active SMTP AUTH and TLS parameters for smtp --
    relayhost = 
    
    
    -- listing of /usr/lib64/sasl2 --
    total 2992
    drwxr-xr-x  2 root root   4096 Aug 18 11:50 .
    drwxr-xr-x 83 root root  53248 Aug 18 01:37 ..
    -rwxr-xr-x  1 root root    890 Mar 17 14:11 libanonymous.la
    -rwxr-xr-x  1 root root  15880 Mar 17 14:11 libanonymous.so
    -rwxr-xr-x  1 root root  15880 Mar 17 14:11 libanonymous.so.2
    -rwxr-xr-x  1 root root  15880 Mar 17 14:11 libanonymous.so.2.0.22
    -rwxr-xr-x  1 root root    862 Mar 17 14:11 liblogin.la
    -rwxr-xr-x  1 root root  16448 Mar 17 14:11 liblogin.so
    -rwxr-xr-x  1 root root  16448 Mar 17 14:11 liblogin.so.2
    -rwxr-xr-x  1 root root  16448 Mar 17 14:11 liblogin.so.2.0.22
    -rwxr-xr-x  1 root root    862 Mar 17 14:11 libplain.la
    -rwxr-xr-x  1 root root  16416 Mar 17 14:11 libplain.so
    -rwxr-xr-x  1 root root  16416 Mar 17 14:11 libplain.so.2
    -rwxr-xr-x  1 root root  16416 Mar 17 14:11 libplain.so.2.0.22
    -rwxr-xr-x  1 root root    936 Mar 17 14:11 libsasldb.la
    -rwxr-xr-x  1 root root 893304 Mar 17 14:11 libsasldb.so
    -rwxr-xr-x  1 root root 893304 Mar 17 14:11 libsasldb.so.2
    -rwxr-xr-x  1 root root 893304 Mar 17 14:11 libsasldb.so.2.0.22
    -rwxr-xr-x  1 root root    878 Mar 17 14:11 libsql.la
    -rwxr-xr-x  1 root root  24808 Mar 17 14:11 libsql.so
    -rwxr-xr-x  1 root root  24808 Mar 17 14:11 libsql.so.2
    -rwxr-xr-x  1 root root  24808 Mar 17 14:11 libsql.so.2.0.22
    -rw-r--r--  1 root root     25 Mar 31 06:50 Sendmail.conf
    -rw-r--r--  1 root root     26 Aug 18 01:47 smtpd.conf
    -rw-r--r--  1 root root    109 Aug 18 00:52 smtpd.conf.rpmsave
    
    -- listing of /usr/lib/sasl2 --
    total 2952
    drwxr-xr-x  2 root root   4096 Aug 18 11:51 .
    drwxr-xr-x 57 root root  32768 Aug 18 01:49 ..
    -rwxr-xr-x  1 root root    884 Mar 17 14:14 libanonymous.la
    -rwxr-xr-x  1 root root  14372 Mar 17 14:14 libanonymous.so
    -rwxr-xr-x  1 root root  14372 Mar 17 14:14 libanonymous.so.2
    -rwxr-xr-x  1 root root  14372 Mar 17 14:14 libanonymous.so.2.0.22
    -rwxr-xr-x  1 root root    856 Mar 17 14:14 liblogin.la
    -rwxr-xr-x  1 root root  14752 Mar 17 14:14 liblogin.so
    -rwxr-xr-x  1 root root  14752 Mar 17 14:14 liblogin.so.2
    -rwxr-xr-x  1 root root  14752 Mar 17 14:14 liblogin.so.2.0.22
    -rwxr-xr-x  1 root root    856 Mar 17 14:14 libplain.la
    -rwxr-xr-x  1 root root  14848 Mar 17 14:14 libplain.so
    -rwxr-xr-x  1 root root  14848 Mar 17 14:14 libplain.so.2
    -rwxr-xr-x  1 root root  14848 Mar 17 14:14 libplain.so.2.0.22
    -rwxr-xr-x  1 root root    930 Mar 17 14:14 libsasldb.la
    -rwxr-xr-x  1 root root 905200 Mar 17 14:14 libsasldb.so
    -rwxr-xr-x  1 root root 905200 Mar 17 14:14 libsasldb.so.2
    -rwxr-xr-x  1 root root 905200 Mar 17 14:14 libsasldb.so.2.0.22
    -rwxr-xr-x  1 root root    878 Mar 17 14:14 libsql.la
    -rwxr-xr-x  1 root root  23080 Mar 17 14:14 libsql.so
    -rwxr-xr-x  1 root root  23080 Mar 17 14:14 libsql.so.2
    -rwxr-xr-x  1 root root  23080 Mar 17 14:14 libsql.so.2.0.22
    -rw-r--r--  1 root root    109 Aug 18 00:52 old.conf
    -rw-r--r--  1 root root    109 Aug 18 11:51 smtpd.conf
    
    -- listing of /etc/sasl2 --
    total 24
    drwxr-xr-x   2 root root  4096 Mar 17 14:14 .
    drwxr-xr-x 108 root root 12288 Aug 18 12:06 ..
    
    
    Cannot find the smtp_sasl_password_maps parameter in main.cf.
    Client-side SMTP AUTH cannot work without this parameter!
    
    I never had this line in main.cf - smtp_sasl_password_maps, and it did work earlier...

    Please help anyone, i'm little lost :)
     
    Last edited: Aug 18, 2010
  3. falko

    falko Super Moderator ISPConfig Developer

    I guess Postfix got updated when you updated the system; the problem with the CentOS Postfix package is that it has no MySQL support, so you must do the Postfix steps from the tutorial again to get MySQL support.
     
  4. Nicram

    Nicram Member

    Well thank You for reply :)
    Well yes, i deleted the postfix from the CentOS repo and installed it manually like at tutorial already, step by step :) But it still do not work :/

    I have find out with google that to fix those:
    Code:
    Aug 18 17:59:09 hosting postfix/smtpd[20283]: sql_select option missing
    Aug 18 17:59:09 hosting postfix/smtpd[20283]: auxpropfunc error no mechanism available 
    i had to delete libsql* from /usr/lib/sasl2/ and /usr/lib64/sasl2 folders. And yes, it did help so there are no those errors anymore in /var/log/messages but there are still problems sending email, here is the log (messages):
    Code:
    Aug 18 17:59:15 hosting saslauthd[7129]: do_auth         : auth failure: [user=myname] [service=smtp] [realm=mydomain.com] [mech=pam] [reason=PAM auth error]
    Well i'm closer to know... That i know nothing :S
    i added debug into /etc/pam.d/smtp at end of the lines, and this is what /vat/log/secure gives me:
    Code:
    Aug 18 19:49:18 hosting saslauthd[26844]: pam_mysql - option debug is set to ""
    Aug 18 19:49:18 hosting saslauthd[26844]: pam_mysql - pam_mysql_close_db() called.
    Aug 18 19:49:18 hosting saslauthd[26844]: pam_mysql - pam_sm_authenticate() called.
    Aug 18 19:49:18 hosting saslauthd[26844]: pam_mysql - pam_mysql_open_db() called.
    Aug 18 19:49:18 hosting saslauthd[26844]: pam_mysql - pam_mysql_open_db() returning 0.
    Aug 18 19:49:18 hosting saslauthd[26844]: pam_mysql - pam_mysql_check_passwd() called.
    Aug 18 19:49:18 hosting saslauthd[26844]: pam_mysql - pam_mysql_format_string() called
    Aug 18 19:49:18 hosting saslauthd[26844]: pam_mysql - pam_mysql_quick_escape() called.
    Aug 18 19:49:18 hosting saslauthd[26844]: pam_mysql - SELECT password FROM mail_user WHERE email = 'myname'
    Aug 18 19:49:18 hosting saslauthd[26844]: pam_mysql - SELECT returned no result.
    Aug 18 19:49:18 hosting saslauthd[26844]: pam_mysql - pam_mysql_check_passwd() returning 1.
    Aug 18 19:49:18 hosting saslauthd[26844]: pam_mysql - pam_mysql_sql_log() called.
    Aug 18 19:49:18 hosting saslauthd[26844]: pam_mysql - pam_mysql_sql_log() returning 0.
    Aug 18 19:49:18 hosting saslauthd[26844]: pam_mysql - pam_mysql_converse() called.
    Aug 18 19:49:18 hosting saslauthd[26844]: pam_mysql - pam_mysql_open_db() called.
    Aug 18 19:49:18 hosting saslauthd[26844]: pam_mysql - pam_mysql_check_passwd() called.
    Aug 18 19:49:18 hosting saslauthd[26844]: pam_mysql - pam_mysql_format_string() called
    Aug 18 19:49:18 hosting saslauthd[26844]: pam_mysql - pam_mysql_quick_escape() called.
    Aug 18 19:49:18 hosting saslauthd[26844]: pam_mysql - SELECT password FROM mail_user WHERE email = 'myname'
    Aug 18 19:49:18 hosting saslauthd[26844]: pam_mysql - SELECT returned no result.
    I dream about day, that someone will take all those devs, and learn them what KISS is all about :S
     
    Last edited: Aug 18, 2010
  5. Nicram

    Nicram Member

    In searching for more information i have found this post: http://www.howtoforge.org/forums/showthread.php?p=197085

    What i did was stop saslauthd (/etc/init.d/ and start it manually:
    saslauthd -a pam -n 5 -V -c -m /var/run/saslauthd -r -d

    And now when i try to send email... it worked!
    Code:
    saslauthd[28382] :main            : num_procs  : 5
    saslauthd[28382] :main            : mech_option: NULL
    saslauthd[28382] :main            : run_path   : /var/run/saslauthd
    saslauthd[28382] :main            : auth_mech  : pam
    saslauthd[28382] :cache_alloc_mm  : mmaped shared memory segment on file: /var/run/saslauthd/cache.mmap
    saslauthd[28382] :cache_init      : bucket size: 96 bytes
    saslauthd[28382] :cache_init      : stats size : 36 bytes
    saslauthd[28382] :cache_init      : timeout    : 28800 seconds
    saslauthd[28382] :cache_init      : cache table: 985828 total bytes
    saslauthd[28382] :cache_init      : cache table: 1711 slots
    saslauthd[28382] :cache_init      : cache table: 10266 buckets
    saslauthd[28382] :cache_init_lock : flock file opened at /var/run/saslauthd/cache.flock
    saslauthd[28382] :ipc_init        : using accept lock file: /var/run/saslauthd/mux.accept
    saslauthd[28382] :detach_tty      : master pid is: 0
    saslauthd[28382] :ipc_init        : listening on socket: /var/run/saslauthd/mux
    saslauthd[28382] :main            : using process model
    saslauthd[28383] :get_accept_lock : acquired accept lock
    saslauthd[28382] :have_baby       : forked child: 28383
    saslauthd[28382] :have_baby       : forked child: 28384
    saslauthd[28382] :have_baby       : forked child: 28385
    saslauthd[28382] :have_baby       : forked child: 28386
    saslauthd[28383] :rel_accept_lock : released accept lock
    saslauthd[28383] :cache_get_rlock : attempting a read lock on slot: 1705
    saslauthd[28383] :cache_lookup    : [login=[email protected]] [service=mydomain.com] [realm=smtp]: not found, update pending
    saslauthd[28383] :cache_un_lock   : attempting to release lock on slot: 1705
    saslauthd[28384] :get_accept_lock : acquired accept lock
    saslauthd[28383] :cache_get_wlock : attempting a write lock on slot: 1705
    saslauthd[28383] :cache_commit    : lookup committed
    saslauthd[28383] :cache_un_lock   : attempting to release lock on slot: 1705
    saslauthd[28383] :do_auth         : auth success: [user=[email protected]] [service=smtp] [realm=mydomain.com] [mech=pam]
    saslauthd[28383] :do_request      : response: OK
    
    Well it was just a shot so now i will analyse what it does, and try to make it work somehow by editing /etc/init.d/saslauthd, i hope i will make it work :)

    2bad there is no xmail with mysql support, it would make so many things easier, not this LEGO a like :S

    OK to make it work just edit /etc/etc/sysconfig/saslauthd so it will look like that:
    Code:
    SOCKETDIR=/var/run/saslauthd
    MECH=pam.
    FLAGS=-r 
    So long way, and so many hours spent only to add little "-r" :S
     
    Last edited: Aug 18, 2010

Share This Page